| Message ID | 20230214211421.2290102-5-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | rtw88: Add additional SDIO support bits | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
> -----Original Message----- > From: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Sent: Wednesday, February 15, 2023 5:14 AM > To: linux-wireless@vger.kernel.org > Cc: tony0620emma@gmail.com; kvalo@kernel.org; netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Neo > Jou <neojou@gmail.com>; Jernej Skrabec <jernej.skrabec@gmail.com>; Ping-Ke Shih <pkshih@realtek.com>; > Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Subject: [PATCH v1 4/5] wifi: rtw88: rtw8822b: Implement RTL8822BS (SDIO) efuse parsing > > The efuse of the SDIO RTL8822BS chip has only one known member: the mac > address is at offset 0x11a. Add a struct rtw8822bs_efuse describing this > and use it for copying the mac address when the SDIO bus is used. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > drivers/net/wireless/realtek/rtw88/rtw8822b.c | 10 ++++++++++ > drivers/net/wireless/realtek/rtw88/rtw8822b.h | 6 ++++++ > 2 files changed, 16 insertions(+) > > diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c > b/drivers/net/wireless/realtek/rtw88/rtw8822b.c > index 74dfb89b2c94..4ed5b98fab23 100644 > --- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c > +++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c > @@ -26,10 +26,17 @@ static void rtw8822be_efuse_parsing(struct rtw_efuse *efuse, > ether_addr_copy(efuse->addr, map->e.mac_addr); > } > > +static void rtw8822bs_efuse_parsing(struct rtw_efuse *efuse, > + struct rtw8822b_efuse *map) > +{ > + ether_addr_copy(efuse->addr, map->s.mac_addr); > +} > + > static void rtw8822bu_efuse_parsing(struct rtw_efuse *efuse, > struct rtw8822b_efuse *map) > { > ether_addr_copy(efuse->addr, map->u.mac_addr); > + Don't need to stir USB code. > } > > static int rtw8822b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map) > @@ -62,6 +69,9 @@ static int rtw8822b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map) > case RTW_HCI_TYPE_PCIE: > rtw8822be_efuse_parsing(efuse, map); > break; > + case RTW_HCI_TYPE_SDIO: > + rtw8822bs_efuse_parsing(efuse, map); > + break; > case RTW_HCI_TYPE_USB: > rtw8822bu_efuse_parsing(efuse, map); > break; > diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.h > b/drivers/net/wireless/realtek/rtw88/rtw8822b.h > index 01d3644e0c94..8d05805c046c 100644 > --- a/drivers/net/wireless/realtek/rtw88/rtw8822b.h > +++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.h > @@ -65,6 +65,11 @@ struct rtw8822be_efuse { > u8 res7; > }; > > +struct rtw8822bs_efuse { > + u8 res4[0x4a]; /* 0xd0 */ > + u8 mac_addr[ETH_ALEN]; /* 0x11a */ > +} __packed; > + > struct rtw8822b_efuse { > __le16 rtl_id; > u8 res0[0x0e]; > @@ -94,6 +99,7 @@ struct rtw8822b_efuse { > union { > struct rtw8822bu_efuse u; > struct rtw8822be_efuse e; > + struct rtw8822bs_efuse s; No obvious problem in whole patchset. Only a nit about the order of PCIE-USB-SDIO. Can we have them in consistent order? Here, the order is USB-PCIE-SDIO, but patch 3/5 and 5/5 in different order. It seems like we messed up the order when adding USB, but we can correct them along with this patch. My prefer order is PCIE-USB-SDIO after adding SDIO, because the order of existing code of 'switch...case' is PCIE-USB. Apply this rule not only here also 'switch...case' and 'efuse parser'. Ping-Ke
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c index 74dfb89b2c94..4ed5b98fab23 100644 --- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c +++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c @@ -26,10 +26,17 @@ static void rtw8822be_efuse_parsing(struct rtw_efuse *efuse, ether_addr_copy(efuse->addr, map->e.mac_addr); } +static void rtw8822bs_efuse_parsing(struct rtw_efuse *efuse, + struct rtw8822b_efuse *map) +{ + ether_addr_copy(efuse->addr, map->s.mac_addr); +} + static void rtw8822bu_efuse_parsing(struct rtw_efuse *efuse, struct rtw8822b_efuse *map) { ether_addr_copy(efuse->addr, map->u.mac_addr); + } static int rtw8822b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map) @@ -62,6 +69,9 @@ static int rtw8822b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map) case RTW_HCI_TYPE_PCIE: rtw8822be_efuse_parsing(efuse, map); break; + case RTW_HCI_TYPE_SDIO: + rtw8822bs_efuse_parsing(efuse, map); + break; case RTW_HCI_TYPE_USB: rtw8822bu_efuse_parsing(efuse, map); break; diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.h b/drivers/net/wireless/realtek/rtw88/rtw8822b.h index 01d3644e0c94..8d05805c046c 100644 --- a/drivers/net/wireless/realtek/rtw88/rtw8822b.h +++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.h @@ -65,6 +65,11 @@ struct rtw8822be_efuse { u8 res7; }; +struct rtw8822bs_efuse { + u8 res4[0x4a]; /* 0xd0 */ + u8 mac_addr[ETH_ALEN]; /* 0x11a */ +} __packed; + struct rtw8822b_efuse { __le16 rtl_id; u8 res0[0x0e]; @@ -94,6 +99,7 @@ struct rtw8822b_efuse { union { struct rtw8822bu_efuse u; struct rtw8822be_efuse e; + struct rtw8822bs_efuse s; }; };
The efuse of the SDIO RTL8822BS chip has only one known member: the mac address is at offset 0x11a. Add a struct rtw8822bs_efuse describing this and use it for copying the mac address when the SDIO bus is used. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/net/wireless/realtek/rtw88/rtw8822b.c | 10 ++++++++++ drivers/net/wireless/realtek/rtw88/rtw8822b.h | 6 ++++++ 2 files changed, 16 insertions(+)