@@ -1612,6 +1612,13 @@ static int vsc9959_qos_port_cbs_set(struct dsa_switch *ds, int port,
static int vsc9959_qos_query_caps(struct tc_query_caps_base *base)
{
switch (base->type) {
+ case TC_SETUP_QDISC_MQPRIO: {
+ struct tc_mqprio_caps *caps = base->caps;
+
+ caps->validate_queue_counts = true;
+
+ return 0;
+ }
case TC_SETUP_QDISC_TAPRIO: {
struct tc_taprio_caps *caps = base->caps;
@@ -1635,6 +1642,8 @@ static int vsc9959_port_setup_tc(struct dsa_switch *ds, int port,
return vsc9959_qos_query_caps(type_data);
case TC_SETUP_QDISC_TAPRIO:
return vsc9959_qos_port_tas_set(ocelot, port, type_data);
+ case TC_SETUP_QDISC_MQPRIO:
+ return ocelot_port_mqprio(ocelot, port, type_data);
case TC_SETUP_QDISC_CBS:
return vsc9959_qos_port_cbs_set(ds, port, type_data);
default:
@@ -7,6 +7,7 @@
#include <linux/dsa/ocelot.h>
#include <linux/if_bridge.h>
#include <linux/iopoll.h>
+#include <net/pkt_sched.h>
#include <soc/mscc/ocelot_vcap.h>
#include "ocelot.h"
#include "ocelot_vcap.h"
@@ -2602,6 +2603,53 @@ void ocelot_port_mirror_del(struct ocelot *ocelot, int from, bool ingress)
}
EXPORT_SYMBOL_GPL(ocelot_port_mirror_del);
+static void ocelot_port_reset_mqprio(struct ocelot *ocelot, int port)
+{
+ struct net_device *dev = ocelot->ops->port_to_netdev(ocelot, port);
+
+ netdev_reset_tc(dev);
+}
+
+int ocelot_port_mqprio(struct ocelot *ocelot, int port,
+ struct tc_mqprio_qopt_offload *mqprio)
+{
+ struct net_device *dev = ocelot->ops->port_to_netdev(ocelot, port);
+ struct tc_mqprio_qopt *qopt = &mqprio->qopt;
+ int num_tc = qopt->num_tc;
+ int tc, err;
+
+ if (!num_tc) {
+ ocelot_port_reset_mqprio(ocelot, port);
+ return 0;
+ }
+
+ err = netdev_set_num_tc(dev, num_tc);
+ if (err)
+ return err;
+
+ for (tc = 0; tc < num_tc; tc++) {
+ if (qopt->count[tc] != 1) {
+ netdev_err(dev, "Only one TXQ per TC supported\n");
+ return -EINVAL;
+ }
+
+ err = netdev_set_tc_queue(dev, tc, 1, qopt->offset[tc]);
+ if (err)
+ goto err_reset_tc;
+ }
+
+ err = netif_set_real_num_tx_queues(dev, num_tc);
+ if (err)
+ goto err_reset_tc;
+
+ return 0;
+
+err_reset_tc:
+ ocelot_port_reset_mqprio(ocelot, port);
+ return err;
+}
+EXPORT_SYMBOL_GPL(ocelot_port_mqprio);
+
void ocelot_init_port(struct ocelot *ocelot, int port)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
@@ -11,6 +11,8 @@
#include <linux/regmap.h>
#include <net/dsa.h>
+struct tc_mqprio_qopt_offload;
+
/* Port Group IDs (PGID) are masks of destination ports.
*
* For L2 forwarding, the switch performs 3 lookups in the PGID table for each
@@ -1145,6 +1147,8 @@ int ocelot_port_set_mm(struct ocelot *ocelot, int port,
struct netlink_ext_ack *extack);
int ocelot_port_get_mm(struct ocelot *ocelot, int port,
struct ethtool_mm_state *state);
+int ocelot_port_mqprio(struct ocelot *ocelot, int port,
+ struct tc_mqprio_qopt_offload *mqprio);
#if IS_ENABLED(CONFIG_BRIDGE_MRP)
int ocelot_mrp_add(struct ocelot *ocelot, int port,
This doesn't apply anything to hardware and in general doesn't do anything that the software variant doesn't do, except for checking that there isn't more than 1 TXQ per TC (TXQs for a DSA switch are a dubious concept anyway). The reason we add this is to be able to parse one more field added to struct tc_mqprio_qopt_offload, namely preemptible_tcs. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- drivers/net/dsa/ocelot/felix_vsc9959.c | 9 +++++ drivers/net/ethernet/mscc/ocelot.c | 48 ++++++++++++++++++++++++++ include/soc/mscc/ocelot.h | 4 +++ 3 files changed, 61 insertions(+)