diff mbox series

[RFC,18/18] net: usb: lan78xx: Fixup EEE

Message ID 20230217034230.1249661-19-andrew@lunn.ch (mailing list archive)
State RFC
Delegated to: Netdev Maintainers
Headers show
Series Rework MAC drivers EEE support | expand

Checks

Context Check Description
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count fail Series longer than 15 patches (and no cover letter)
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit fail Errors and warnings before: 7 this patch: 7
netdev/cc_maintainers warning 7 maintainers not CCed: linux-mediatek@lists.infradead.org pabeni@redhat.com kuba@kernel.org edumazet@google.com linux-usb@vger.kernel.org linux-arm-kernel@lists.infradead.org davem@davemloft.net
netdev/build_clang fail Errors and warnings before: 5 this patch: 5
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn fail Errors and warnings before: 7 this patch: 7
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 70 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Andrew Lunn Feb. 17, 2023, 3:42 a.m. UTC
The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
lan783xx_phy_link_status_change() which gets called by phylib when
there is a change in link status.

lan78xx_set_eee() now just programs the hardware with the LTI
timer value, and passed everything else to phylib, so it can correctly
setup the PHY.

lan743x_get_eee() relies on phylib doing most of the work, the
MAC driver just adds the LTI timer value, and tx_lpi_enabled based on
if EEE is active.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/usb/lan78xx.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index f18ab8e220db..a06eac83cc01 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1690,16 +1690,11 @@  static int lan78xx_get_eee(struct net_device *net, struct ethtool_eee *edata)
 
 	ret = lan78xx_read_reg(dev, MAC_CR, &buf);
 	if (buf & MAC_CR_EEE_EN_) {
-		edata->eee_enabled = true;
-		edata->eee_active = !!(edata->advertised &
-				       edata->lp_advertised);
 		edata->tx_lpi_enabled = true;
 		/* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
 		ret = lan78xx_read_reg(dev, EEE_TX_LPI_REQ_DLY, &buf);
 		edata->tx_lpi_timer = buf;
 	} else {
-		edata->eee_enabled = false;
-		edata->eee_active = false;
 		edata->tx_lpi_enabled = false;
 		edata->tx_lpi_timer = 0;
 	}
@@ -1721,24 +1716,16 @@  static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
 	if (ret < 0)
 		return ret;
 
-	if (edata->eee_enabled) {
-		ret = lan78xx_read_reg(dev, MAC_CR, &buf);
-		buf |= MAC_CR_EEE_EN_;
-		ret = lan78xx_write_reg(dev, MAC_CR, buf);
-
-		phy_ethtool_set_eee(net->phydev, edata);
-
-		buf = (u32)edata->tx_lpi_timer;
-		ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
-	} else {
-		ret = lan78xx_read_reg(dev, MAC_CR, &buf);
-		buf &= ~MAC_CR_EEE_EN_;
-		ret = lan78xx_write_reg(dev, MAC_CR, buf);
-	}
+	ret = phy_ethtool_set_eee(net->phydev, edata);
+	if (ret < 0)
+		goto out;
 
+	buf = (u32)edata->tx_lpi_timer;
+	ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
+out:
 	usb_autopm_put_interface(dev->intf);
 
-	return 0;
+	return ret;
 }
 
 static u32 lan78xx_get_link(struct net_device *net)
@@ -2114,8 +2101,10 @@  static void lan78xx_remove_mdio(struct lan78xx_net *dev)
 
 static void lan78xx_link_status_change(struct net_device *net)
 {
+	struct lan78xx_net *dev = netdev_priv(net);
 	struct phy_device *phydev = net->phydev;
 	int temp;
+	u32 data;
 
 	/* At forced 100 F/H mode, chip may fail to set mode correctly
 	 * when cable is switched between long(~50+m) and short one.
@@ -2142,6 +2131,13 @@  static void lan78xx_link_status_change(struct net_device *net)
 		temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
 		phy_write(phydev, LAN88XX_INT_MASK, temp);
 	}
+
+	lan78xx_read_reg(dev, MAC_CR, &data);
+	if (phydev->eee_active)
+		data |=  MAC_CR_EEE_EN_;
+	else
+		data &= ~MAC_CR_EEE_EN_;
+	lan78xx_write_reg(dev, MAC_CR, data);
 }
 
 static int irq_map(struct irq_domain *d, unsigned int irq,