| Message ID | 20230224155941.514638-3-vladimir.oltean@nxp.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8b322f9fdb35ecee0d4a40de8af923444bd624ea |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Freescale T1040RDB DTS updates | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts index b6733e7e6580..dd3aab81e9de 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -180,6 +180,9 @@ &seville_port7 { }; &seville_port8 { - ethernet = <&enet0>; + status = "okay"; +}; + +&seville_port9 { status = "okay"; }; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index f58eb820eb5e..ad0ab33336b8 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -686,6 +686,7 @@ seville_port7: port@7 { seville_port8: port@8 { reg = <8>; phy-mode = "internal"; + ethernet = <&enet0>; status = "disabled"; fixed-link { @@ -697,6 +698,7 @@ fixed-link { seville_port9: port@9 { reg = <9>; phy-mode = "internal"; + ethernet = <&enet1>; status = "disabled"; fixed-link {
Since commit eca70102cfb1 ("net: dsa: felix: add support for changing DSA master") included in kernel v6.1, the driver supports 2 CPU ports, and they can be put in a LAG, for example (see Documentation/networking/dsa/configuration.rst for more details). Defining the second CPU port in the device tree should not cause any compatibility issue, because the default CPU port was &seville_port8 before this change, and still is &seville_port8 now (the numerically first CPU port is used by default). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- arch/powerpc/boot/dts/fsl/t1040rdb.dts | 5 ++++- arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-)