| Message ID | 20230322011442.34475-5-steev@kali.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add WCN6855 Bluetooth support | expand |
| Context | Check | Description |
|---|---|---|
| netdev/series_format | success | Posting correctly formatted |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/fixes_present | success | Fixes tag not required for -next series |
| netdev/header_inline | success | No static functions without inline keyword in header files |
| netdev/build_32bit | success | Errors and warnings before: 18 this patch: 18 |
| netdev/cc_maintainers | success | CCed 7 of 7 maintainers |
| netdev/build_clang | success | Errors and warnings before: 18 this patch: 18 |
| netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
| netdev/deprecated_api | success | None detected |
| netdev/check_selftest | success | No net selftest shell script |
| netdev/verify_fixes | success | No Fixes tag |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 18 this patch: 18 |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 108 lines checked |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/source_inline | success | Was 0 now: 0 |
On Tue, Mar 21, 2023 at 08:14:42PM -0500, Steev Klimaszewski wrote: > The Lenovo Thinkpad X13s has a WCN6855 Bluetooth controller on uart2, > add this. > > Signed-off-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Regards, Bjorn > --- > Changes since v6: > * Remove allowed-modes as they aren't needed > * Remove regulator-allow-set-load > * Set regulator-always-on because the wifi chip also uses the regulator > * cts pin uses bias-bus-hold > * Alphabetize uart2 pins > > Changes since v5: > * Update patch subject > * Specify initial mode (via guess) for vreg_s1c > * Drop uart17 definition > * Rename bt_en to bt_default because configuring more than one pin > * Correct (maybe) bias configurations > * Correct cts gpio > * Split rts-tx into two nodes > * Drop incorrect link in the commit message > > Changes since v4: > * Address Konrad's review comments. > > Changes since v3: > * Add vreg_s1c > * Add regulators and not dead code > * Fix commit message changelog > > Changes since v2: > * Remove dead code and add TODO comment > * Make dtbs_check happy with the pin definitions > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 78 +++++++++++++++++++ > 1 file changed, 78 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > index 92d365519546..05e66505e5cc 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > @@ -24,6 +24,7 @@ / { > aliases { > i2c4 = &i2c4; > i2c21 = &i2c21; > + serial1 = &uart2; > }; > > wcd938x: audio-codec { > @@ -431,6 +432,14 @@ regulators-1 { > qcom,pmic-id = "c"; > vdd-bob-supply = <&vreg_vph_pwr>; > > + vreg_s1c: smps1 { > + regulator-name = "vreg_s1c"; > + regulator-min-microvolt = <1880000>; > + regulator-max-microvolt = <1900000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > vreg_l1c: ldo1 { > regulator-name = "vreg_l1c"; > regulator-min-microvolt = <1800000>; > @@ -918,6 +927,32 @@ &qup0 { > status = "okay"; > }; > > +&uart2 { > + pinctrl-0 = <&uart2_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn6855-bt"; > + > + vddio-supply = <&vreg_s10b>; > + vddbtcxmx-supply = <&vreg_s12b>; > + vddrfacmn-supply = <&vreg_s12b>; > + vddrfa0p8-supply = <&vreg_s12b>; > + vddrfa1p2-supply = <&vreg_s11b>; > + vddrfa1p7-supply = <&vreg_s1c>; > + > + max-speed = <3200000>; > + > + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; > + > + pinctrl-0 = <&bt_default>; > + pinctrl-names = "default"; > + }; > +}; > + > &qup1 { > status = "okay"; > }; > @@ -1192,6 +1227,21 @@ hastings_reg_en: hastings-reg-en-state { > &tlmm { > gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; > > + bt_default: bt-default-state { > + hstp-sw-ctrl-pins { > + pins = "gpio132"; > + function = "gpio"; > + bias-pull-down; > + }; > + > + hstp-bt-en-pins { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + }; > + > edp_reg_en: edp-reg-en-state { > pins = "gpio25"; > function = "gpio"; > @@ -1213,6 +1263,34 @@ i2c4_default: i2c4-default-state { > bias-disable; > }; > > + uart2_default: uart2-default-state { > + cts-pins { > + pins = "gpio121"; > + function = "qup2"; > + bias-bus-hold; > + }; > + > + rts-pins { > + pins = "gpio122"; > + function = "qup2"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + rx-pins { > + pins = "gpio124"; > + function = "qup2"; > + bias-pull-up; > + }; > + > + tx-pins { > + pins = "gpio123"; > + function = "qup2"; > + drive-strength = <2>; > + bias-disable; > + }; > + }; > + > i2c21_default: i2c21-default-state { > pins = "gpio81", "gpio82"; > function = "qup21"; > -- > 2.39.2 >
On Tue, Mar 21, 2023 at 08:14:42PM -0500, Steev Klimaszewski wrote: > The Lenovo Thinkpad X13s has a WCN6855 Bluetooth controller on uart2, > add this. > > Signed-off-by: Steev Klimaszewski <steev@kali.org> > --- > Changes since v6: > * Remove allowed-modes as they aren't needed > * Remove regulator-allow-set-load > * Set regulator-always-on because the wifi chip also uses the regulator > * cts pin uses bias-bus-hold > * Alphabetize uart2 pins > > Changes since v5: > * Update patch subject > * Specify initial mode (via guess) for vreg_s1c > * Drop uart17 definition > * Rename bt_en to bt_default because configuring more than one pin > * Correct (maybe) bias configurations > * Correct cts gpio > * Split rts-tx into two nodes > * Drop incorrect link in the commit message > > Changes since v4: > * Address Konrad's review comments. > > Changes since v3: > * Add vreg_s1c > * Add regulators and not dead code > * Fix commit message changelog > > Changes since v2: > * Remove dead code and add TODO comment > * Make dtbs_check happy with the pin definitions > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 78 +++++++++++++++++++ > 1 file changed, 78 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > index 92d365519546..05e66505e5cc 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > @@ -24,6 +24,7 @@ / { > aliases { > i2c4 = &i2c4; > i2c21 = &i2c21; > + serial1 = &uart2; > }; > > wcd938x: audio-codec { > @@ -431,6 +432,14 @@ regulators-1 { > qcom,pmic-id = "c"; > vdd-bob-supply = <&vreg_vph_pwr>; > > + vreg_s1c: smps1 { > + regulator-name = "vreg_s1c"; > + regulator-min-microvolt = <1880000>; > + regulator-max-microvolt = <1900000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; I went through the schematics to check for further problems with consumers that are not yet described and found a few more bugs: https://lore.kernel.org/lkml/20230322113318.17908-1-johan+linaro@kernel.org Note that that series is now adding the s1c supply as it also used by some of the pmics. I'm assuming those fixes may get merged before this patch is, in which case the above hunk should be dropped. > + > vreg_l1c: ldo1 { > regulator-name = "vreg_l1c"; > regulator-min-microvolt = <1800000>; > @@ -918,6 +927,32 @@ &qup0 { > status = "okay"; > }; > > +&uart2 { This node in no longer in alphabetical order and needs to be moved further down (above &usb_0). > + pinctrl-0 = <&uart2_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn6855-bt"; > + > + vddio-supply = <&vreg_s10b>; > + vddbtcxmx-supply = <&vreg_s12b>; > + vddrfacmn-supply = <&vreg_s12b>; > + vddrfa0p8-supply = <&vreg_s12b>; > + vddrfa1p2-supply = <&vreg_s11b>; > + vddrfa1p7-supply = <&vreg_s1c>; > + > + max-speed = <3200000>; > + > + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; > + > + pinctrl-0 = <&bt_default>; > + pinctrl-names = "default"; > + }; > +}; > + > &qup1 { > status = "okay"; > }; > @@ -1192,6 +1227,21 @@ hastings_reg_en: hastings-reg-en-state { > &tlmm { > gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; > > + bt_default: bt-default-state { > + hstp-sw-ctrl-pins { > + pins = "gpio132"; > + function = "gpio"; > + bias-pull-down; > + }; Similarly, this one should go after hstp-bt-en-pins. > + > + hstp-bt-en-pins { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + }; > + > edp_reg_en: edp-reg-en-state { > pins = "gpio25"; > function = "gpio"; > @@ -1213,6 +1263,34 @@ i2c4_default: i2c4-default-state { > bias-disable; > }; > > + uart2_default: uart2-default-state { And this one is also not ordered correctly. > + }; > + > i2c21_default: i2c21-default-state { > pins = "gpio81", "gpio82"; > function = "qup21"; Johan
Hi Johan, Thanks again for your time in reviewing things, it's greatly appreciated! On Wed, Mar 22, 2023 at 6:41 AM Johan Hovold <johan@kernel.org> wrote: > > On Tue, Mar 21, 2023 at 08:14:42PM -0500, Steev Klimaszewski wrote: > > The Lenovo Thinkpad X13s has a WCN6855 Bluetooth controller on uart2, > > add this. > > > > Signed-off-by: Steev Klimaszewski <steev@kali.org> > > --- > > Changes since v6: > > * Remove allowed-modes as they aren't needed > > * Remove regulator-allow-set-load > > * Set regulator-always-on because the wifi chip also uses the regulator > > * cts pin uses bias-bus-hold > > * Alphabetize uart2 pins > > > > Changes since v5: > > * Update patch subject > > * Specify initial mode (via guess) for vreg_s1c > > * Drop uart17 definition > > * Rename bt_en to bt_default because configuring more than one pin > > * Correct (maybe) bias configurations > > * Correct cts gpio > > * Split rts-tx into two nodes > > * Drop incorrect link in the commit message > > > > Changes since v4: > > * Address Konrad's review comments. > > > > Changes since v3: > > * Add vreg_s1c > > * Add regulators and not dead code > > * Fix commit message changelog > > > > Changes since v2: > > * Remove dead code and add TODO comment > > * Make dtbs_check happy with the pin definitions > > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 78 +++++++++++++++++++ > > 1 file changed, 78 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > > index 92d365519546..05e66505e5cc 100644 > > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > > @@ -24,6 +24,7 @@ / { > > aliases { > > i2c4 = &i2c4; > > i2c21 = &i2c21; > > + serial1 = &uart2; > > }; > > > > wcd938x: audio-codec { > > @@ -431,6 +432,14 @@ regulators-1 { > > qcom,pmic-id = "c"; > > vdd-bob-supply = <&vreg_vph_pwr>; > > > > + vreg_s1c: smps1 { > > + regulator-name = "vreg_s1c"; > > + regulator-min-microvolt = <1880000>; > > + regulator-max-microvolt = <1900000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-always-on; > > + }; > > I went through the schematics to check for further problems with > consumers that are not yet described and found a few more bugs: > > https://lore.kernel.org/lkml/20230322113318.17908-1-johan+linaro@kernel.org > > Note that that series is now adding the s1c supply as it also used by > some of the pmics. > > I'm assuming those fixes may get merged before this patch is, in which > case the above hunk should be dropped. > I can spin up v8 dropping this hunk and mention the dependency on that series. > > + > > vreg_l1c: ldo1 { > > regulator-name = "vreg_l1c"; > > regulator-min-microvolt = <1800000>; > > @@ -918,6 +927,32 @@ &qup0 { > > status = "okay"; > > }; > > > > +&uart2 { > > This node in no longer in alphabetical order and needs to be moved > further down (above &usb_0). > Ack > > + pinctrl-0 = <&uart2_default>; > > + pinctrl-names = "default"; > > + > > + status = "okay"; > > + > > + bluetooth { > > + compatible = "qcom,wcn6855-bt"; > > + > > + vddio-supply = <&vreg_s10b>; > > + vddbtcxmx-supply = <&vreg_s12b>; > > + vddrfacmn-supply = <&vreg_s12b>; > > + vddrfa0p8-supply = <&vreg_s12b>; > > + vddrfa1p2-supply = <&vreg_s11b>; > > + vddrfa1p7-supply = <&vreg_s1c>; > > + > > + max-speed = <3200000>; > > + > > + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > > + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-0 = <&bt_default>; > > + pinctrl-names = "default"; > > + }; > > +}; > > + > > &qup1 { > > status = "okay"; > > }; > > @@ -1192,6 +1227,21 @@ hastings_reg_en: hastings-reg-en-state { > > &tlmm { > > gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; > > > > + bt_default: bt-default-state { > > + hstp-sw-ctrl-pins { > > + pins = "gpio132"; > > + function = "gpio"; > > + bias-pull-down; > > + }; > > Similarly, this one should go after hstp-bt-en-pins. > Ack > > + > > + hstp-bt-en-pins { > > + pins = "gpio133"; > > + function = "gpio"; > > + drive-strength = <16>; > > + bias-disable; > > + }; > > + }; > > + > > edp_reg_en: edp-reg-en-state { > > pins = "gpio25"; > > function = "gpio"; > > @@ -1213,6 +1263,34 @@ i2c4_default: i2c4-default-state { > > bias-disable; > > }; > > > > + uart2_default: uart2-default-state { > > And this one is also not ordered correctly. > Ack > > + }; > > + > > i2c21_default: i2c21-default-state { > > pins = "gpio81", "gpio82"; > > function = "qup21"; > > Johan -- steev
On Wed, Mar 22, 2023 at 10:35:03AM -0500, Steev Klimaszewski wrote: > On Wed, Mar 22, 2023 at 6:41 AM Johan Hovold <johan@kernel.org> wrote: > > I went through the schematics to check for further problems with > > consumers that are not yet described and found a few more bugs: > > > > https://lore.kernel.org/lkml/20230322113318.17908-1-johan+linaro@kernel.org > > > > Note that that series is now adding the s1c supply as it also used by > > some of the pmics. > > > > I'm assuming those fixes may get merged before this patch is, in which > > case the above hunk should be dropped. > > > > I can spin up v8 dropping this hunk and mention the dependency on that > series. Sounds good. Bjorn has even merged the above series now. Johan
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 92d365519546..05e66505e5cc 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -24,6 +24,7 @@ / { aliases { i2c4 = &i2c4; i2c21 = &i2c21; + serial1 = &uart2; }; wcd938x: audio-codec { @@ -431,6 +432,14 @@ regulators-1 { qcom,pmic-id = "c"; vdd-bob-supply = <&vreg_vph_pwr>; + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; regulator-min-microvolt = <1800000>; @@ -918,6 +927,32 @@ &qup0 { status = "okay"; }; +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddio-supply = <&vreg_s10b>; + vddbtcxmx-supply = <&vreg_s12b>; + vddrfacmn-supply = <&vreg_s12b>; + vddrfa0p8-supply = <&vreg_s12b>; + vddrfa1p2-supply = <&vreg_s11b>; + vddrfa1p7-supply = <&vreg_s1c>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &qup1 { status = "okay"; }; @@ -1192,6 +1227,21 @@ hastings_reg_en: hastings-reg-en-state { &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + bt_default: bt-default-state { + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -1213,6 +1263,34 @@ i2c4_default: i2c4-default-state { bias-disable; }; + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21";
The Lenovo Thinkpad X13s has a WCN6855 Bluetooth controller on uart2, add this. Signed-off-by: Steev Klimaszewski <steev@kali.org> --- Changes since v6: * Remove allowed-modes as they aren't needed * Remove regulator-allow-set-load * Set regulator-always-on because the wifi chip also uses the regulator * cts pin uses bias-bus-hold * Alphabetize uart2 pins Changes since v5: * Update patch subject * Specify initial mode (via guess) for vreg_s1c * Drop uart17 definition * Rename bt_en to bt_default because configuring more than one pin * Correct (maybe) bias configurations * Correct cts gpio * Split rts-tx into two nodes * Drop incorrect link in the commit message Changes since v4: * Address Konrad's review comments. Changes since v3: * Add vreg_s1c * Add regulators and not dead code * Fix commit message changelog Changes since v2: * Remove dead code and add TODO comment * Make dtbs_check happy with the pin definitions .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+)