@@ -2258,6 +2258,18 @@ static int dl_argv_parse(struct dl *dl, uint64_t o_required,
if (mig)
opts->port_fn_caps.value |= DEVLINK_PORT_FN_CAP_MIGRATABLE;
o_found |= DL_OPT_PORT_FN_CAPS;
+ } else if (dl_argv_match(dl, "ipsec_crypto") &&
+ (o_all & DL_OPT_PORT_FN_CAPS)) {
+ bool ipsec_crypto;
+
+ dl_arg_inc(dl);
+ err = dl_argv_bool(dl, &ipsec_crypto);
+ if (err)
+ return err;
+ opts->port_fn_caps.selector |= DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO;
+ if (ipsec_crypto)
+ opts->port_fn_caps.value |= DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO;
+ o_found |= DL_OPT_PORT_FN_CAPS;
} else {
pr_err("Unknown option \"%s\"\n", dl_argv(dl));
return -EINVAL;
@@ -4536,6 +4548,7 @@ static void cmd_port_help(void)
pr_err(" devlink port unsplit DEV/PORT_INDEX\n");
pr_err(" devlink port function set DEV/PORT_INDEX [ hw_addr ADDR ] [ state { active | inactive } ]\n");
pr_err(" [ roce { enable | disable } ] [ migratable { enable | disable } ]\n");
+ pr_err(" [ ipsec_crypto { enable | disable } ]\n");
pr_err(" devlink port function rate { help | show | add | del | set }\n");
pr_err(" devlink port param set DEV/PORT_INDEX name PARAMETER value VALUE cmode { permanent | driverinit | runtime }\n");
pr_err(" devlink port param show [DEV/PORT_INDEX name PARAMETER]\n");
@@ -4661,6 +4674,10 @@ static void pr_out_port_function(struct dl *dl, struct nlattr **tb_port)
print_string(PRINT_ANY, "migratable", " migratable %s",
port_fn_caps->value & DEVLINK_PORT_FN_CAP_MIGRATABLE ?
"enable" : "disable");
+ if (port_fn_caps->selector & DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO)
+ print_string(PRINT_ANY, "ipsec_crypto", " ipsec_crypto %s",
+ port_fn_caps->value & DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO ?
+ "enable" : "disable");
}
if (!dl->json_output)
@@ -4857,6 +4874,7 @@ static void cmd_port_function_help(void)
{
pr_err("Usage: devlink port function set DEV/PORT_INDEX [ hw_addr ADDR ] [ state STATE ]\n");
pr_err(" [ roce { enable | disable } ] [ migratable { enable | disable } ]\n");
+ pr_err(" [ ipsec_crypto { enable | disable } ]\n");
pr_err(" devlink port function rate { help | show | add | del | set }\n");
}
@@ -77,6 +77,9 @@ devlink-port \- devlink port configuration
.RI "[ "
.BR migratable " { " enable " | " disable " }"
.RI "]"
+.RI "[ "
+.BR ipsec_crypto " { " enable " | " disable " }"
+.RI "]"
.ti -8
.BR "devlink port function rate "
@@ -222,6 +225,10 @@ Set the RoCE capability of the function.
.BR migratable " { " enable " | " disable " } "
Set the migratable capability of the function.
+.TP
+.BR ipsec_crypto " { " enable " | " disable " } "
+Set the IPsec crypto offload capability of the function.
+
.ti -8
.SS devlink port del - delete a devlink port
.PP
@@ -351,6 +358,11 @@ devlink port function set pci/0000:01:00.0/1 migratable enable
This will enable the migratable functionality of the function.
.RE
.PP
+devlink port function set pci/0000:01:00.0/1 ipsec_crypto enable
+.RS 4
+This will enable the IPsec crypto offload functionality of the function.
+.RE
+.PP
devlink port function set pci/0000:01:00.0/1 hw_addr 00:00:00:11:22:33 state active
.RS 4
Configure hardware address and also active the function. When a function is
Support port function commands to enable / disable IPsec crypto offloads, this is used to control the port IPsec device capabilities. When IPsec capability is disabled for a function of the port (default), function cannot offload any IPsec operations. When enabled, IPsec operations can be offloaded by the function of the port. Enabling IPsec crypto offloads lets the kernel to delegate encrypt/decrypt operations to the device hardware. Example of a PCI VF port which supports IPsec crypto offloads: $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable $ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable $ devlink port show pci/0000:06:00.0/1 pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0 function: hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> --- devlink/devlink.c | 18 ++++++++++++++++++ man/man8/devlink-port.8 | 12 ++++++++++++ 2 files changed, 30 insertions(+)