diff mbox series

[v2,4/6] Revert "PCI: hv: Fix a timing issue which causes kdump to fail occasionally"

Message ID 20230404020545.32359-5-decui@microsoft.com (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series pci-hyper: Fix race condition bugs for fast device hotplug | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Dexuan Cui April 4, 2023, 2:05 a.m. UTC
This reverts commit d6af2ed29c7c1c311b96dac989dcb991e90ee195.

The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit d6af2ed29c7c is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().

The commit d6af2ed29c7c was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Wei Hu <weh@microsoft.com>
Cc: stable@vger.kernel.org
---

v2:
  No change to the patch body.
  Added Wei Hu's Acked-by.
  Added Cc:stable

 drivers/pci/controller/pci-hyperv.c | 71 ++++++++++++++---------------
 1 file changed, 34 insertions(+), 37 deletions(-)

Comments

Michael Kelley (LINUX) April 7, 2023, 4:33 p.m. UTC | #1
From: Dexuan Cui <decui@microsoft.com> Sent: Monday, April 3, 2023 7:06 PM
> 
> This reverts commit d6af2ed29c7c1c311b96dac989dcb991e90ee195.
> 
> The statement "the hv_pci_bus_exit() call releases structures of all its
> child devices" in commit d6af2ed29c7c is not true: in the path
> hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
> parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
> child "struct hv_pci_dev *hpdev" that is created earlier in
> pci_devices_present_work() -> new_pcichild_device().
> 
> The commit d6af2ed29c7c was originally made in July 2020 for RHEL 7.7,
> where the old version of hv_pci_bus_exit() was used; when the commit was
> rebased and merged into the upstream, people didn't notice that it's
> not really necessary. The commit itself doesn't cause any issue, but it
> makes hv_pci_probe() more complicated. Revert it to facilitate some
> upcoming changes to hv_pci_probe().
> 
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Acked-by: Wei Hu <weh@microsoft.com>
> Cc: stable@vger.kernel.org
> ---
> 
> v2:
>   No change to the patch body.
>   Added Wei Hu's Acked-by.
>   Added Cc:stable
> 
>  drivers/pci/controller/pci-hyperv.c | 71 ++++++++++++++---------------
>  1 file changed, 34 insertions(+), 37 deletions(-)
> 

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 46df6d093d683..48feab095a144 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -3225,8 +3225,10 @@  static int hv_pci_enter_d0(struct hv_device *hdev)
 	struct pci_bus_d0_entry *d0_entry;
 	struct hv_pci_compl comp_pkt;
 	struct pci_packet *pkt;
+	bool retry = true;
 	int ret;
 
+enter_d0_retry:
 	/*
 	 * Tell the host that the bus is ready to use, and moved into the
 	 * powered-on state.  This includes telling the host which region
@@ -3253,6 +3255,38 @@  static int hv_pci_enter_d0(struct hv_device *hdev)
 	if (ret)
 		goto exit;
 
+	/*
+	 * In certain case (Kdump) the pci device of interest was
+	 * not cleanly shut down and resource is still held on host
+	 * side, the host could return invalid device status.
+	 * We need to explicitly request host to release the resource
+	 * and try to enter D0 again.
+	 */
+	if (comp_pkt.completion_status < 0 && retry) {
+		retry = false;
+
+		dev_err(&hdev->device, "Retrying D0 Entry\n");
+
+		/*
+		 * Hv_pci_bus_exit() calls hv_send_resource_released()
+		 * to free up resources of its child devices.
+		 * In the kdump kernel we need to set the
+		 * wslot_res_allocated to 255 so it scans all child
+		 * devices to release resources allocated in the
+		 * normal kernel before panic happened.
+		 */
+		hbus->wslot_res_allocated = 255;
+
+		ret = hv_pci_bus_exit(hdev, true);
+
+		if (ret == 0) {
+			kfree(pkt);
+			goto enter_d0_retry;
+		}
+		dev_err(&hdev->device,
+			"Retrying D0 failed with ret %d\n", ret);
+	}
+
 	if (comp_pkt.completion_status < 0) {
 		dev_err(&hdev->device,
 			"PCI Pass-through VSP failed D0 Entry with status %x\n",
@@ -3493,7 +3527,6 @@  static int hv_pci_probe(struct hv_device *hdev,
 	struct hv_pcibus_device *hbus;
 	u16 dom_req, dom;
 	char *name;
-	bool enter_d0_retry = true;
 	int ret;
 
 	/*
@@ -3633,47 +3666,11 @@  static int hv_pci_probe(struct hv_device *hdev,
 	if (ret)
 		goto free_fwnode;
 
-retry:
 	ret = hv_pci_query_relations(hdev);
 	if (ret)
 		goto free_irq_domain;
 
 	ret = hv_pci_enter_d0(hdev);
-	/*
-	 * In certain case (Kdump) the pci device of interest was
-	 * not cleanly shut down and resource is still held on host
-	 * side, the host could return invalid device status.
-	 * We need to explicitly request host to release the resource
-	 * and try to enter D0 again.
-	 * Since the hv_pci_bus_exit() call releases structures
-	 * of all its child devices, we need to start the retry from
-	 * hv_pci_query_relations() call, requesting host to send
-	 * the synchronous child device relations message before this
-	 * information is needed in hv_send_resources_allocated()
-	 * call later.
-	 */
-	if (ret == -EPROTO && enter_d0_retry) {
-		enter_d0_retry = false;
-
-		dev_err(&hdev->device, "Retrying D0 Entry\n");
-
-		/*
-		 * Hv_pci_bus_exit() calls hv_send_resources_released()
-		 * to free up resources of its child devices.
-		 * In the kdump kernel we need to set the
-		 * wslot_res_allocated to 255 so it scans all child
-		 * devices to release resources allocated in the
-		 * normal kernel before panic happened.
-		 */
-		hbus->wslot_res_allocated = 255;
-		ret = hv_pci_bus_exit(hdev, true);
-
-		if (ret == 0)
-			goto retry;
-
-		dev_err(&hdev->device,
-			"Retrying D0 failed with ret %d\n", ret);
-	}
 	if (ret)
 		goto free_irq_domain;