| Message ID | 20230407152503.2320741-3-andrew@lunn.ch (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add missing DSA properties for marvell switches | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 9fc79af2bc9a..9594bc5745ed 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -238,8 +238,13 @@ port@3 { port@5 { reg = <5>; - label = "cpu"; ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5bb47c79a4da..826a9d6cb4d8 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -757,7 +757,7 @@ port@1 { port@2 { reg = <2>; - label = "cpu"; + phy-mode = "rmii"; ethernet = <&fec>; fixed-link {
The DSA framework has got more picky about always having a phy-mode for the CPU port. Add a phy-mode based on what the SoC ethernet is using. For RGMII mode, have the switch add the delays. Additionally, the cpu label has never actually been used in the binding, so remove it. Lastly add a fixed-link node indicating the expected speed/duplex of the link to the SoC. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 7 ++++++- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-)