diff mbox series

[1/3] dt-bindings: net: wireless: qcom,ath11k: allow describing radios

Message ID 20230414212356.9326-1-zajec5@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [1/3] dt-bindings: net: wireless: qcom,ath11k: allow describing radios | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Rafał Miłecki April 14, 2023, 9:23 p.m. UTC
From: Rafał Miłecki <rafal@milecki.pl>

Qualcomm ath11k chipsets can have up to 3 radios. Each radio may need to
be additionally described by including its MAC or available frequency
ranges.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 .../bindings/net/wireless/qcom,ath11k.yaml    | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Rob Herring (Arm) April 17, 2023, 1:10 p.m. UTC | #1
On Fri, 14 Apr 2023 23:23:54 +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Qualcomm ath11k chipsets can have up to 3 radios. Each radio may need to
> be additionally described by including its MAC or available frequency
> ranges.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
>  .../bindings/net/wireless/qcom,ath11k.yaml    | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: wifi@c000000: radio@0: Unevaluated properties are not allowed ('reg' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: wifi@c000000: '#address-cells', '#size-cells' do not match any of the regexes: '^radio@[0-2]$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230414212356.9326-1-zajec5@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 7d5f982a3d09..ed660d563e09 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -78,6 +78,24 @@  properties:
     items:
       - const: wlan-smp2p-out
 
+patternProperties:
+  "^radio@[0-2]$":
+    type: object
+
+    allOf:
+      - $ref: ieee80211.yaml#
+
+    properties:
+      nvmem-cells:
+        items:
+          - description: NVMEM cell with the MAC address
+
+      nvmem-cell-names:
+        items:
+          - const: mac-address
+
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -378,6 +396,14 @@  examples:
                           "wbm2host-tx-completions-ring1",
                           "tcl2host-status-ring";
         qcom,rproc = <&q6v5_wcss>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        radio@0 {
+            reg = <0x0>;
+            nvmem-cells = <&mac>;
+            nvmem-cell-names = "mac-address";
+        };
     };
 
   - |