@@ -1182,12 +1182,30 @@ static void wx_enable_sec_rx_path(struct wx *wx)
WX_WRITE_FLUSH(wx);
}
+static void wx_vlan_strip_control(struct wx *wx, bool enable)
+{
+ int i, j;
+
+ for (i = 0; i < wx->num_rx_queues; i++) {
+ struct wx_ring *ring = wx->rx_ring[i];
+
+ if (ring->accel)
+ continue;
+ j = ring->reg_idx;
+ wr32m(wx, WX_PX_RR_CFG(j), WX_PX_RR_CFG_VLAN,
+ enable ? WX_PX_RR_CFG_VLAN : 0);
+ }
+}
+
void wx_set_rx_mode(struct net_device *netdev)
{
struct wx *wx = netdev_priv(netdev);
+ netdev_features_t features;
u32 fctrl, vmolr, vlnctrl;
int count;
+ features = netdev->features;
+
/* Check for Promiscuous and All Multicast modes */
fctrl = rd32(wx, WX_PSR_CTL);
fctrl &= ~(WX_PSR_CTL_UPE | WX_PSR_CTL_MPE);
@@ -1254,6 +1272,13 @@ void wx_set_rx_mode(struct net_device *netdev)
wr32(wx, WX_PSR_VLAN_CTL, vlnctrl);
wr32(wx, WX_PSR_CTL, fctrl);
wr32(wx, WX_PSR_VM_L2CTL(0), vmolr);
+
+ if ((features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ (features & NETIF_F_HW_VLAN_STAG_RX))
+ wx_vlan_strip_control(wx, true);
+ else
+ wx_vlan_strip_control(wx, false);
+
}
EXPORT_SYMBOL(wx_set_rx_mode);
@@ -1462,6 +1487,16 @@ static void wx_configure_tx(struct wx *wx)
WX_MAC_TX_CFG_TE, WX_MAC_TX_CFG_TE);
}
+static void wx_restore_vlan(struct wx *wx)
+{
+ u16 vid = 1;
+
+ wx_vlan_rx_add_vid(wx->netdev, htons(ETH_P_8021Q), 0);
+
+ for_each_set_bit_from(vid, wx->active_vlans, VLAN_N_VID)
+ wx_vlan_rx_add_vid(wx->netdev, htons(ETH_P_8021Q), vid);
+}
+
/**
* wx_configure_rx - Configure Receive Unit after Reset
* @wx: pointer to private structure
@@ -1527,7 +1562,7 @@ void wx_configure(struct wx *wx)
wx_configure_port(wx);
wx_set_rx_mode(wx->netdev);
-
+ wx_restore_vlan(wx);
wx_enable_sec_rx_path(wx);
wx_configure_tx(wx);
@@ -1727,4 +1762,246 @@ int wx_sw_init(struct wx *wx)
}
EXPORT_SYMBOL(wx_sw_init);
+/**
+ * wx_find_vlvf_slot - find the vlanid or the first empty slot
+ * @wx: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ *
+ * return the VLVF index where this VLAN id should be placed
+ *
+ **/
+static int wx_find_vlvf_slot(struct wx *wx, u32 vlan)
+{
+ u32 bits = 0, first_empty_slot = 0;
+ int regindex;
+
+ /* short cut the special case */
+ if (vlan == 0)
+ return 0;
+
+ /* Search for the vlan id in the VLVF entries. Save off the first empty
+ * slot found along the way
+ */
+ for (regindex = 1; regindex < WX_PSR_VLAN_SWC_ENTRIES; regindex++) {
+ wr32(wx, WX_PSR_VLAN_SWC_IDX, regindex);
+ bits = rd32(wx, WX_PSR_VLAN_SWC);
+ if (!bits && !(first_empty_slot))
+ first_empty_slot = regindex;
+ else if ((bits & 0x0FFF) == vlan)
+ break;
+ }
+
+ /* If regindex is less than TXGBE_VLVF_ENTRIES, then we found the vlan
+ * in the VLVF. Else use the first empty VLVF register for this
+ * vlan id.
+ */
+ if (regindex >= WX_PSR_VLAN_SWC_ENTRIES) {
+ if (first_empty_slot)
+ regindex = first_empty_slot;
+ else
+ regindex = -ENOMEM;
+ }
+
+ return regindex;
+}
+
+/**
+ * wx_set_vlvf - Set VLAN Pool Filter
+ * @wx: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ * @vfta_changed: pointer to boolean flag which indicates whether VFTA
+ * should be changed
+ *
+ * Turn on/off specified bit in VLVF table.
+ **/
+static int wx_set_vlvf(struct wx *wx, u32 vlan, u32 vind, bool vlan_on,
+ bool *vfta_changed)
+{
+ u32 vt;
+
+ /* If VT Mode is set
+ * Either vlan_on
+ * make sure the vlan is in VLVF
+ * set the vind bit in the matching VLVFB
+ * Or !vlan_on
+ * clear the pool bit and possibly the vind
+ */
+ vt = rd32(wx, WX_CFG_PORT_CTL);
+ if (vt & WX_CFG_PORT_CTL_NUM_VT_MASK) {
+ s32 vlvf_index;
+ u32 bits;
+
+ vlvf_index = wx_find_vlvf_slot(wx, vlan);
+ if (vlvf_index < 0)
+ return vlvf_index;
+
+ wr32(wx, WX_PSR_VLAN_SWC_IDX, vlvf_index);
+ if (vlan_on) {
+ /* set the pool bit */
+ if (vind < 32) {
+ bits = rd32(wx, WX_PSR_VLAN_SWC_VM_L);
+ bits |= (1 << vind);
+ wr32(wx, WX_PSR_VLAN_SWC_VM_L, bits);
+ } else {
+ bits = rd32(wx, WX_PSR_VLAN_SWC_VM_H);
+ bits |= (1 << (vind - 32));
+ wr32(wx, WX_PSR_VLAN_SWC_VM_H, bits);
+ }
+ } else {
+ /* clear the pool bit */
+ if (vind < 32) {
+ bits = rd32(wx, WX_PSR_VLAN_SWC_VM_L);
+ bits &= ~(1 << vind);
+ wr32(wx, WX_PSR_VLAN_SWC_VM_L, bits);
+ bits |= rd32(wx, WX_PSR_VLAN_SWC_VM_H);
+ } else {
+ bits = rd32(wx, WX_PSR_VLAN_SWC_VM_H);
+ bits &= ~(1 << (vind - 32));
+ wr32(wx, WX_PSR_VLAN_SWC_VM_H, bits);
+ bits |= rd32(wx, WX_PSR_VLAN_SWC_VM_L);
+ }
+ }
+
+ if (bits) {
+ wr32(wx, WX_PSR_VLAN_SWC, (WX_PSR_VLAN_SWC_VIEN | vlan));
+ if (!vlan_on && vfta_changed)
+ *vfta_changed = false;
+ } else {
+ wr32(wx, WX_PSR_VLAN_SWC, 0);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * wx_set_vfta - Set VLAN filter table
+ * @wx: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+static int wx_set_vfta(struct wx *wx, u32 vlan, u32 vind, bool vlan_on)
+{
+ u32 bitindex, vfta, targetbit;
+ bool vfta_changed = false;
+ int regindex, ret;
+
+ /* this is a 2 part operation - first the VFTA, then the
+ * VLVF and VLVFB if VT Mode is set
+ * We don't write the VFTA until we know the VLVF part succeeded.
+ */
+
+ /* Part 1
+ * The VFTA is a bitstring made up of 128 32-bit registers
+ * that enable the particular VLAN id, much like the MTA:
+ * bits[11-5]: which register
+ * bits[4-0]: which bit in the register
+ */
+ regindex = (vlan >> 5) & 0x7F;
+ bitindex = vlan & 0x1F;
+ targetbit = (1 << bitindex);
+ /* errata 5 */
+ vfta = wx->mac.vft_shadow[regindex];
+ if (vlan_on) {
+ if (!(vfta & targetbit)) {
+ vfta |= targetbit;
+ vfta_changed = true;
+ }
+ } else {
+ if ((vfta & targetbit)) {
+ vfta &= ~targetbit;
+ vfta_changed = true;
+ }
+ }
+ /* Part 2
+ * Call wx_set_vlvf to set VLVFB and VLVF
+ */
+ ret = wx_set_vlvf(wx, vlan, vind, vlan_on, &vfta_changed);
+ if (ret != 0)
+ return ret;
+
+ if (vfta_changed)
+ wr32(wx, WX_PSR_VLAN_TBL(regindex), vfta);
+ wx->mac.vft_shadow[regindex] = vfta;
+
+ return 0;
+}
+
+/**
+ * wx_clear_vfta - Clear VLAN filter table
+ * @wx: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static void wx_clear_vfta(struct wx *wx)
+{
+ u32 offset;
+
+ for (offset = 0; offset < wx->mac.vft_size; offset++) {
+ wr32(wx, WX_PSR_VLAN_TBL(offset), 0);
+ wx->mac.vft_shadow[offset] = 0;
+ }
+
+ for (offset = 0; offset < WX_PSR_VLAN_SWC_ENTRIES; offset++) {
+ wr32(wx, WX_PSR_VLAN_SWC_IDX, offset);
+ wr32(wx, WX_PSR_VLAN_SWC, 0);
+ wr32(wx, WX_PSR_VLAN_SWC_VM_L, 0);
+ wr32(wx, WX_PSR_VLAN_SWC_VM_H, 0);
+ }
+}
+
+int wx_vlan_rx_add_vid(struct net_device *netdev,
+ __be16 proto, u16 vid)
+{
+ struct wx *wx = netdev_priv(netdev);
+
+ /* add VID to filter table */
+ wx_set_vfta(wx, vid, VMDQ_P(0), true);
+ set_bit(vid, wx->active_vlans);
+
+ return 0;
+}
+EXPORT_SYMBOL(wx_vlan_rx_add_vid);
+
+int wx_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+ struct wx *wx = netdev_priv(netdev);
+
+ /* remove VID from filter table */
+ if (vid)
+ wx_set_vfta(wx, vid, VMDQ_P(0), false);
+ clear_bit(vid, wx->active_vlans);
+
+ return 0;
+}
+EXPORT_SYMBOL(wx_vlan_rx_kill_vid);
+
+/**
+ * wx_start_hw - Prepare hardware for Tx/Rx
+ * @wx: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+void wx_start_hw(struct wx *wx)
+{
+ int i;
+
+ /* Clear the VLAN filter table */
+ wx_clear_vfta(wx);
+ WX_WRITE_FLUSH(wx);
+ /* Clear the rate limiters */
+ for (i = 0; i < wx->mac.max_tx_queues; i++) {
+ wr32(wx, WX_TDM_RP_IDX, i);
+ wr32(wx, WX_TDM_RP_RATE, 0);
+ }
+}
+EXPORT_SYMBOL(wx_start_hw);
+
MODULE_LICENSE("GPL");
@@ -26,10 +26,13 @@ void wx_set_rx_mode(struct net_device *netdev);
int wx_change_mtu(struct net_device *netdev, int new_mtu);
void wx_disable_rx_queue(struct wx *wx, struct wx_ring *ring);
void wx_configure(struct wx *wx);
+void wx_start_hw(struct wx *wx);
int wx_disable_pcie_master(struct wx *wx);
int wx_stop_adapter(struct wx *wx);
void wx_reset_misc(struct wx *wx);
int wx_get_pcie_msix_counts(struct wx *wx, u16 *msix_count, u16 max_msix_count);
int wx_sw_init(struct wx *wx);
+int wx_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid);
+int wx_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid);
#endif /* _WX_HW_H_ */
@@ -499,6 +499,23 @@ static inline void wx_rx_checksum(struct wx_ring *ring,
ring->rx_stats.csum_good_cnt++;
}
+static void wx_rx_vlan(struct wx_ring *ring, union wx_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ u16 ethertype;
+ u8 idx = 0;
+
+ if ((ring->netdev->features &
+ (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) &&
+ wx_test_staterr(rx_desc, WX_RXD_STAT_VP)) {
+ idx = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info) &
+ 0x1c0) >> 6;
+ ethertype = ring->q_vector->wx->tpid[idx];
+ __vlan_hwaccel_put_tag(skb, htons(ethertype),
+ le16_to_cpu(rx_desc->wb.upper.vlan));
+ }
+}
+
/**
* wx_process_skb_fields - Populate skb header fields from Rx descriptor
* @rx_ring: rx descriptor ring packet is being transacted on
@@ -515,6 +532,7 @@ static void wx_process_skb_fields(struct wx_ring *rx_ring,
{
wx_rx_hash(rx_ring, rx_desc, skb);
wx_rx_checksum(rx_ring, rx_desc, skb);
+ wx_rx_vlan(rx_ring, rx_desc, skb);
skb_record_rx_queue(skb, rx_ring->queue_index);
skb->protocol = eth_type_trans(skb, rx_ring->netdev);
}
@@ -6,6 +6,7 @@
#include <linux/bitfield.h>
#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
#include <net/ip.h>
#define WX_NCSI_SUP 0x8000
@@ -65,6 +66,8 @@
#define WX_CFG_PORT_CTL_QINQ BIT(2)
#define WX_CFG_PORT_CTL_D_VLAN BIT(0) /* double vlan*/
#define WX_CFG_TAG_TPID(_i) (0x14430 + ((_i) * 4))
+#define WX_CFG_PORT_CTL_NUM_VT_MASK GENMASK(13, 12) /* number of TVs */
+
/* GPIO Registers */
#define WX_GPIO_DR 0x14800
@@ -88,6 +91,8 @@
/* TDM CTL BIT */
#define WX_TDM_CTL_TE BIT(0) /* Transmit Enable */
#define WX_TDM_PB_THRE(_i) (0x18020 + ((_i) * 4))
+#define WX_TDM_RP_IDX 0x1820C
+#define WX_TDM_RP_RATE 0x18404
/***************************** RDB registers *********************************/
/* receive packet buffer */
@@ -151,6 +156,9 @@
#define WX_PSR_LAN_FLEX_DW_H(_i) (0x15C04 + ((_i) * 16))
#define WX_PSR_LAN_FLEX_MSK(_i) (0x15C08 + ((_i) * 16))
+/* vlan tbl */
+#define WX_PSR_VLAN_TBL(_i) (0x16000 + ((_i) * 4))
+
/* mac switcher */
#define WX_PSR_MAC_SWC_AD_L 0x16200
#define WX_PSR_MAC_SWC_AD_H 0x16204
@@ -162,6 +170,15 @@
#define WX_PSR_MAC_SWC_IDX 0x16210
#define WX_CLEAR_VMDQ_ALL 0xFFFFFFFFU
+/* vlan switch */
+#define WX_PSR_VLAN_SWC 0x16220
+#define WX_PSR_VLAN_SWC_VM_L 0x16224
+#define WX_PSR_VLAN_SWC_VM_H 0x16228
+#define WX_PSR_VLAN_SWC_IDX 0x16230 /* 64 vlan entries */
+/* VLAN pool filtering masks */
+#define WX_PSR_VLAN_SWC_VIEN BIT(31) /* filter is valid */
+#define WX_PSR_VLAN_SWC_ENTRIES 64
+
/********************************* RSEC **************************************/
/* general rsec */
#define WX_RSC_CTL 0x17000
@@ -256,6 +273,7 @@
#define WX_PX_RR_RP(_i) (0x0100C + ((_i) * 0x40))
#define WX_PX_RR_CFG(_i) (0x01010 + ((_i) * 0x40))
/* PX_RR_CFG bit definitions */
+#define WX_PX_RR_CFG_VLAN BIT(31)
#define WX_PX_RR_CFG_SPLIT_MODE BIT(26)
#define WX_PX_RR_CFG_RR_THER_SHIFT 16
#define WX_PX_RR_CFG_RR_HDR_SZ GENMASK(15, 12)
@@ -533,6 +551,8 @@ enum wx_tx_flags {
/* VLAN info */
#define WX_TX_FLAGS_VLAN_MASK GENMASK(31, 16)
+#define WX_TX_FLAGS_VLAN_PRIO_MASK GENMASK(31, 29)
+#define WX_TX_FLAGS_VLAN_PRIO_SHIFT 29
#define WX_TX_FLAGS_VLAN_SHIFT 16
/**
@@ -1023,6 +1043,7 @@ struct wx_ring_container {
};
struct wx_fwd_adapter {
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
struct net_device *vdev;
struct wx *wx;
unsigned int tx_base_queue;
@@ -1095,6 +1116,8 @@ enum wx_isb_idx {
};
struct wx {
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
u8 __iomem *hw_addr;
struct pci_dev *pdev;
struct net_device *netdev;
Implement vlan add/kill functions which add and remove vlan id in hardware. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 279 ++++++++++++++++++- drivers/net/ethernet/wangxun/libwx/wx_hw.h | 3 + drivers/net/ethernet/wangxun/libwx/wx_lib.c | 18 ++ drivers/net/ethernet/wangxun/libwx/wx_type.h | 23 ++ 4 files changed, 322 insertions(+), 1 deletion(-)