Message ID | 20230505090558.2355-2-samin.guo@starfivetech.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | Add motorcomm phy pad-driver-strength-cfg support | expand |
Context | Check | Description |
---|---|---|
netdev/series_format | success | Posting correctly formatted |
netdev/tree_selection | success | Guessed tree name to be net-next |
netdev/fixes_present | success | Fixes tag not required for -next series |
netdev/header_inline | success | No static functions without inline keyword in header files |
netdev/build_32bit | success | Errors and warnings before: 8 this patch: 8 |
netdev/cc_maintainers | success | CCed 10 of 10 maintainers |
netdev/build_clang | success | Errors and warnings before: 8 this patch: 8 |
netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
netdev/deprecated_api | success | None detected |
netdev/check_selftest | success | No net selftest shell script |
netdev/verify_fixes | success | No Fixes tag |
netdev/build_allmodconfig_warn | success | Errors and warnings before: 8 this patch: 8 |
netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 18 lines checked |
netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
netdev/source_inline | success | Was 0 now: 0 |
On 05/05/2023 11:05, Samin Guo wrote: > The motorcomm phy (YT8531) supports the ability to adjust the drive > strength of the rx_clk/rx_data, the value range of pad driver > strength is 0 to 7. > > Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > --- > .../devicetree/bindings/net/motorcomm,yt8xxx.yaml | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml > index 157e3bbcaf6f..29a1997a1577 100644 > --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml > +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml > @@ -52,6 +52,18 @@ properties: > for a timer. > type: boolean > > + motorcomm,rx-clk-driver-strength: > + description: drive strength of rx_clk pad. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] > + default: 3 No improvements after Andrew's comment. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml index 157e3bbcaf6f..29a1997a1577 100644 --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -52,6 +52,18 @@ properties: for a timer. type: boolean + motorcomm,rx-clk-driver-strength: + description: drive strength of rx_clk pad. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + default: 3 + + motorcomm,rx-data-driver-strength: + description: drive strength of rx_data/rx_ctl rgmii pad. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + default: 3 + motorcomm,tx-clk-adj-enabled: description: | This configuration is mainly to adapt to VF2 with JH7110 SoC.
The motorcomm phy (YT8531) supports the ability to adjust the drive strength of the rx_clk/rx_data, the value range of pad driver strength is 0 to 7. Signed-off-by: Samin Guo <samin.guo@starfivetech.com> --- .../devicetree/bindings/net/motorcomm,yt8xxx.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)