@@ -14,6 +14,7 @@ struct idpf_vport_max_q;
#include <linux/etherdevice.h>
#include <linux/pci.h>
#include <linux/bitfield.h>
+#include <linux/dim.h>
#include "virtchnl2.h"
#include "idpf_lan_txrx.h"
@@ -203,12 +204,16 @@ extern const char * const idpf_vport_vc_state_str[];
* enum idpf_vport_flags - vport flags
* @IDPF_VPORT_VC_MSG_PENDING: Virtchnl message buffer received needs to be
* processed
+ * @IDPF_VPORT_SW_MARKER: Indicate TX pipe drain software marker packets
+ * processing is done
* @IDPF_VPORT_ADD_MAC_REQ: Asynchronous add ether address in flight
* @IDPF_VPORT_DEL_MAC_REQ: Asynchronous delete ether address in flight
* @IDPF_VPORT_FLAGS_NBITS: Must be last
*/
enum idpf_vport_flags {
IDPF_VPORT_VC_MSG_PENDING,
+ /* Indicate TX pipe drain software marker packets processing is done */
+ IDPF_VPORT_SW_MARKER,
/* Asynchronous add/del ether address in flight */
IDPF_VPORT_ADD_MAC_REQ,
IDPF_VPORT_DEL_MAC_REQ,
@@ -232,6 +237,7 @@ struct idpf_vport {
*/
int txq_desc_count;
int complq_desc_count;
+ int compln_clean_budget;
int num_txq_grp;
struct idpf_txq_group *txq_grps;
u32 txq_model;
@@ -264,6 +270,9 @@ struct idpf_vport {
u16 *q_vector_idxs; /* q vector index array */
u16 max_mtu;
u8 default_mac_addr[ETH_ALEN];
+ /* ITR profiles for the DIM algorithm */
+#define IDPF_DIM_PROFILE_SLOTS 5
+ u16 tx_itr_profile[IDPF_DIM_PROFILE_SLOTS];
bool link_up;
@@ -273,6 +282,8 @@ struct idpf_vport {
/* Everything below this will NOT be copied during soft reset */
enum idpf_vport_state state;
wait_queue_head_t vchnl_wq;
+ /* wait_queue for TX drain SW marker packets */
+ wait_queue_head_t sw_marker_wq;
/* lock to protect against multiple stop threads, which can happen when
* the driver is in a namespace in a system that is being shutdown
*/
@@ -56,6 +56,14 @@ enum idpf_rss_hash {
BIT_ULL(IDPF_HASH_NONF_UNICAST_IPV6_UDP) | \
BIT_ULL(IDPF_HASH_NONF_MULTICAST_IPV6_UDP))
+/* For idpf_splitq_base_tx_compl_desc */
+#define IDPF_TXD_COMPLQ_GEN_S 15
+#define IDPF_TXD_COMPLQ_GEN_M BIT_ULL(IDPF_TXD_COMPLQ_GEN_S)
+#define IDPF_TXD_COMPLQ_COMPL_TYPE_S 11
+#define IDPF_TXD_COMPLQ_COMPL_TYPE_M GENMASK_ULL(13, 11)
+#define IDPF_TXD_COMPLQ_QID_S 0
+#define IDPF_TXD_COMPLQ_QID_M GENMASK_ULL(9, 0)
+
#define IDPF_TXD_CTX_QW1_MSS_S 50
#define IDPF_TXD_CTX_QW1_MSS_M GENMASK_ULL(63, 50)
#define IDPF_TXD_CTX_QW1_TSO_LEN_S 30
@@ -75,6 +83,14 @@ enum idpf_rss_hash {
#define IDPF_TXD_QW1_DTYPE_S 0
#define IDPF_TXD_QW1_DTYPE_M GENMASK_ULL(3, 0)
+/* TX Completion Descriptor Completion Types */
+#define IDPF_TXD_COMPLT_ITR_FLUSH 0
+#define IDPF_TXD_COMPLT_RULE_MISS 1
+#define IDPF_TXD_COMPLT_RS 2
+#define IDPF_TXD_COMPLT_REINJECTED 3
+#define IDPF_TXD_COMPLT_RE 4
+#define IDPF_TXD_COMPLT_SW_MARKER 5
+
enum idpf_tx_desc_dtype_value {
IDPF_TX_DESC_DTYPE_DATA = 0,
IDPF_TX_DESC_DTYPE_CTX = 1,
@@ -916,6 +916,7 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
vport->idx = idx;
vport->adapter = adapter;
+ vport->compln_clean_budget = IDPF_TX_COMPLQ_CLEAN_BUDGET;
vport->default_vport = adapter->num_alloc_vports <
idpf_get_default_vports(adapter);
@@ -1253,6 +1254,7 @@ void idpf_init_task(struct work_struct *work)
index = vport->idx;
vport_config = adapter->vport_config[index];
+ init_waitqueue_head(&vport->sw_marker_wq);
init_waitqueue_head(&vport->vchnl_wq);
spin_lock_init(&vport->mac_filter_list_lock);
@@ -3,6 +3,36 @@
#include "idpf.h"
+/**
+ * idpf_buf_lifo_push - push a buffer pointer onto stack
+ * @stack: pointer to stack struct
+ * @buf: pointer to buf to push
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int idpf_buf_lifo_push(struct idpf_buf_lifo *stack,
+ struct idpf_tx_stash *buf)
+{
+ if (unlikely(stack->top == stack->size))
+ return -ENOSPC;
+
+ stack->bufs[stack->top++] = buf;
+
+ return 0;
+}
+
+/**
+ * idpf_buf_lifo_pop - pop a buffer pointer from stack
+ * @stack: pointer to stack struct
+ **/
+static struct idpf_tx_stash *idpf_buf_lifo_pop(struct idpf_buf_lifo *stack)
+{
+ if (unlikely(!stack->top))
+ return NULL;
+
+ return stack->bufs[--stack->top];
+}
+
/**
* idpf_tx_buf_rel - Release a Tx buffer
* @tx_q: the queue that owns the buffer
@@ -1480,6 +1510,733 @@ int idpf_vport_queues_alloc(struct idpf_vport *vport)
return err;
}
+/**
+ * idpf_tx_handle_sw_marker - Handle queue marker packet
+ * @tx_q: tx queue to handle software marker
+ */
+static void idpf_tx_handle_sw_marker(struct idpf_queue *tx_q)
+{
+ struct idpf_vport *vport = tx_q->vport;
+ int i;
+
+ clear_bit(__IDPF_Q_SW_MARKER, tx_q->flags);
+ /* Hardware must write marker packets to all queues associated with
+ * completion queues. So check if all queues received marker packets
+ */
+ for (i = 0; i < vport->num_txq; i++)
+ /* If we're still waiting on any other TXQ marker completions,
+ * just return now since we cannot wake up the marker_wq yet.
+ */
+ if (test_bit(__IDPF_Q_SW_MARKER, vport->txqs[i]->flags))
+ return;
+
+ /* Drain complete */
+ set_bit(IDPF_VPORT_SW_MARKER, vport->flags);
+ wake_up(&vport->sw_marker_wq);
+}
+
+/**
+ * idpf_tx_splitq_unmap_hdr - unmap DMA buffer for header
+ * @tx_q: tx queue to clean buffer from
+ * @tx_buf: buffer to be cleaned
+ */
+static void idpf_tx_splitq_unmap_hdr(struct idpf_queue *tx_q,
+ struct idpf_tx_buf *tx_buf)
+{
+ /* unmap skb header data */
+ dma_unmap_single(tx_q->dev,
+ dma_unmap_addr(tx_buf, dma),
+ dma_unmap_len(tx_buf, len),
+ DMA_TO_DEVICE);
+
+ dma_unmap_len_set(tx_buf, len, 0);
+}
+
+/**
+ * idpf_tx_splitq_clean_hdr - Clean TX buffer resources for header portion of
+ * packet
+ * @tx_q: tx queue to clean buffer from
+ * @tx_buf: buffer to be cleaned
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @napi_budget: Used to determine if we are in netpoll
+ */
+static void idpf_tx_splitq_clean_hdr(struct idpf_queue *tx_q,
+ struct idpf_tx_buf *tx_buf,
+ struct idpf_cleaned_stats *cleaned,
+ int napi_budget)
+{
+ napi_consume_skb(tx_buf->skb, napi_budget);
+
+ if (dma_unmap_len(tx_buf, len))
+ idpf_tx_splitq_unmap_hdr(tx_q, tx_buf);
+
+ /* clear tx_buf data */
+ tx_buf->skb = NULL;
+
+ cleaned->bytes += tx_buf->bytecount;
+ cleaned->packets += tx_buf->gso_segs;
+}
+
+/**
+ * idpf_tx_clean_stashed_bufs - clean bufs that were stored for
+ * out of order completions
+ * @txq: queue to clean
+ * @compl_tag: completion tag of packet to clean (from completion descriptor)
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @budget: Used to determine if we are in netpoll
+ */
+static void idpf_tx_clean_stashed_bufs(struct idpf_queue *txq, u16 compl_tag,
+ struct idpf_cleaned_stats *cleaned,
+ int budget)
+{
+ struct idpf_tx_stash *stash;
+ struct hlist_node *tmp_buf;
+
+ /* Buffer completion */
+ hash_for_each_possible_safe(txq->sched_buf_hash, stash, tmp_buf,
+ hlist, compl_tag) {
+ if (unlikely(stash->buf.compl_tag != (int)compl_tag))
+ continue;
+
+ if (stash->buf.skb) {
+ idpf_tx_splitq_clean_hdr(txq, &stash->buf, cleaned,
+ budget);
+ } else if (dma_unmap_len(&stash->buf, len)) {
+ dma_unmap_page(txq->dev,
+ dma_unmap_addr(&stash->buf, dma),
+ dma_unmap_len(&stash->buf, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(&stash->buf, len, 0);
+ }
+ if (stash->miss_pkt)
+ del_timer(&stash->reinject_timer);
+
+ /* Push shadow buf back onto stack */
+ idpf_buf_lifo_push(&txq->buf_stack, stash);
+
+ hash_del(&stash->hlist);
+ }
+}
+
+/**
+ * idpf_tx_find_stashed_bufs - fetch "first" buffer for a packet with the given
+ * completion tag
+ * @txq: queue to clean
+ * @compl_tag: completion tag of packet to clean (from completion descriptor)
+ */
+static struct idpf_tx_stash *idpf_tx_find_stashed_bufs(struct idpf_queue *txq,
+ u16 compl_tag)
+{
+ struct idpf_tx_stash *stash;
+
+ /* Buffer completion */
+ hash_for_each_possible(txq->sched_buf_hash, stash, hlist, compl_tag) {
+ if (unlikely(stash->buf.compl_tag != (int)compl_tag))
+ continue;
+
+ if (stash->buf.skb)
+ return stash;
+ }
+
+ return NULL;
+}
+
+/**
+ * idpf_tx_handle_reinject_expire - handler for miss completion timer
+ * @timer: pointer to timer that expired
+ */
+static void idpf_tx_handle_reinject_expire(struct timer_list *timer)
+{
+ struct idpf_tx_stash *stash = from_timer(stash, timer, reinject_timer);
+ struct idpf_cleaned_stats cleaned = { };
+ struct idpf_queue *txq = stash->txq;
+ struct netdev_queue *nq;
+
+ idpf_tx_clean_stashed_bufs(txq, stash->buf.compl_tag, &cleaned, 0);
+
+ /* Update BQL */
+ nq = netdev_get_tx_queue(txq->vport->netdev, txq->idx);
+ netdev_tx_completed_queue(nq, cleaned.packets, cleaned.bytes);
+}
+
+/**
+ * idpf_tx_start_reinject_timer - start timer to wait for reinject completion
+ * @txq: pointer to queue struct
+ * @stash: stash of packet to start timer for
+ */
+static void idpf_tx_start_reinject_timer(struct idpf_queue *txq,
+ struct idpf_tx_stash *stash)
+{
+ /* Back pointer to txq so timer expire handler knows what to
+ * clean if timer expires.
+ */
+ stash->txq = txq;
+ timer_setup(&stash->reinject_timer, idpf_tx_handle_reinject_expire, 0);
+ mod_timer(&stash->reinject_timer, jiffies + msecs_to_jiffies(4 * HZ));
+}
+
+/**
+ * idpf_stash_flow_sch_buffers - store buffer parameters info to be freed at a
+ * later time (only relevant for flow scheduling mode)
+ * @txq: Tx queue to clean
+ * @tx_buf: buffer to store
+ * @compl_type: type of completion, determines what extra steps need to be
+ * taken when stashing, such as starting the reinject timer on a miss
+ * completion. Only IDPF_TXD_COMPLT_RULE_MISS and IDPF_TXD_COMPLT_REINJECTED
+ * are relevant
+ */
+static int idpf_stash_flow_sch_buffers(struct idpf_queue *txq,
+ struct idpf_tx_buf *tx_buf,
+ u8 compl_type)
+{
+ struct idpf_tx_stash *stash;
+
+ if (unlikely(!dma_unmap_addr(tx_buf, dma) &&
+ !dma_unmap_len(tx_buf, len)))
+ return 0;
+
+ stash = idpf_buf_lifo_pop(&txq->buf_stack);
+ if (unlikely(!stash)) {
+ net_err_ratelimited("%s: No out-of-order TX buffers left!\n",
+ txq->vport->netdev->name);
+
+ return -ENOMEM;
+ }
+
+ /* Store buffer params in shadow buffer */
+ stash->buf.skb = tx_buf->skb;
+ stash->buf.bytecount = tx_buf->bytecount;
+ stash->buf.gso_segs = tx_buf->gso_segs;
+ dma_unmap_addr_set(&stash->buf, dma, dma_unmap_addr(tx_buf, dma));
+ dma_unmap_len_set(&stash->buf, len, dma_unmap_len(tx_buf, len));
+ stash->buf.compl_tag = tx_buf->compl_tag;
+
+ if (unlikely(compl_type == IDPF_TXD_COMPLT_RULE_MISS)) {
+ idpf_tx_start_reinject_timer(txq, stash);
+ stash->miss_pkt = true;
+ } else if (unlikely(compl_type == IDPF_TXD_COMPLT_REINJECTED)) {
+ stash->miss_pkt = true;
+ }
+
+ /* Add buffer to buf_hash table to be freed later */
+ hash_add(txq->sched_buf_hash, &stash->hlist, stash->buf.compl_tag);
+
+ memset(tx_buf, 0, sizeof(struct idpf_tx_buf));
+
+ /* Reinitialize buf_id portion of tag */
+ tx_buf->compl_tag = IDPF_SPLITQ_TX_INVAL_COMPL_TAG;
+
+ return 0;
+}
+
+#define idpf_tx_splitq_clean_bump_ntc(txq, ntc, desc, buf) \
+do { \
+ (ntc)++; \
+ if (unlikely(!(ntc))) { \
+ ntc -= (txq)->desc_count; \
+ buf = (txq)->tx_buf; \
+ desc = IDPF_FLEX_TX_DESC(txq, 0); \
+ } else { \
+ (buf)++; \
+ (desc)++; \
+ } \
+} while (0)
+
+/**
+ * idpf_tx_splitq_clean - Reclaim resources from buffer queue
+ * @tx_q: Tx queue to clean
+ * @end: queue index until which it should be cleaned
+ * @napi_budget: Used to determine if we are in netpoll
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @descs_only: true if queue is using flow-based scheduling and should
+ * not clean buffers at this time
+ *
+ * Cleans the queue descriptor ring. If the queue is using queue-based
+ * scheduling, the buffers will be cleaned as well. If the queue is using
+ * flow-based scheduling, only the descriptors are cleaned at this time.
+ * Separate packet completion events will be reported on the completion queue,
+ * and the buffers will be cleaned separately. The stats are not updated from
+ * this function when using flow-based scheduling.
+ */
+static void idpf_tx_splitq_clean(struct idpf_queue *tx_q, u16 end,
+ int napi_budget,
+ struct idpf_cleaned_stats *cleaned,
+ bool descs_only)
+{
+ union idpf_tx_flex_desc *next_pending_desc = NULL;
+ union idpf_tx_flex_desc *tx_desc;
+ s16 ntc = tx_q->next_to_clean;
+ struct idpf_tx_buf *tx_buf;
+
+ tx_desc = IDPF_FLEX_TX_DESC(tx_q, ntc);
+ next_pending_desc = IDPF_FLEX_TX_DESC(tx_q, end);
+ tx_buf = &tx_q->tx_buf[ntc];
+ ntc -= tx_q->desc_count;
+
+ while (tx_desc != next_pending_desc) {
+ union idpf_tx_flex_desc *eop_desc;
+
+ /* If this entry in the ring was used as a context descriptor,
+ * it's corresponding entry in the buffer ring will have an
+ * invalid completion tag since no buffer was used. We can
+ * skip this descriptor since there is no buffer to clean.
+ */
+ if (unlikely(tx_buf->compl_tag == IDPF_SPLITQ_TX_INVAL_COMPL_TAG))
+ goto fetch_next_txq_desc;
+
+ eop_desc = (union idpf_tx_flex_desc *)tx_buf->next_to_watch;
+
+ /* clear next_to_watch to prevent false hangs */
+ tx_buf->next_to_watch = NULL;
+
+ if (descs_only) {
+ if (idpf_stash_flow_sch_buffers(tx_q, tx_buf, IDPF_TXD_COMPLT_RE))
+ goto tx_splitq_clean_out;
+
+ while (tx_desc != eop_desc) {
+ idpf_tx_splitq_clean_bump_ntc(tx_q, ntc,
+ tx_desc, tx_buf);
+
+ if (dma_unmap_len(tx_buf, len)) {
+ if (idpf_stash_flow_sch_buffers(tx_q,
+ tx_buf,
+ IDPF_TXD_COMPLT_RE))
+ goto tx_splitq_clean_out;
+ }
+ }
+ } else {
+ idpf_tx_splitq_clean_hdr(tx_q, tx_buf, cleaned,
+ napi_budget);
+
+ /* unmap remaining buffers */
+ while (tx_desc != eop_desc) {
+ idpf_tx_splitq_clean_bump_ntc(tx_q, ntc,
+ tx_desc, tx_buf);
+
+ /* unmap any remaining paged data */
+ if (dma_unmap_len(tx_buf, len)) {
+ dma_unmap_page(tx_q->dev,
+ dma_unmap_addr(tx_buf, dma),
+ dma_unmap_len(tx_buf, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buf, len, 0);
+ }
+ }
+ }
+
+fetch_next_txq_desc:
+ idpf_tx_splitq_clean_bump_ntc(tx_q, ntc, tx_desc, tx_buf);
+ }
+
+tx_splitq_clean_out:
+ ntc += tx_q->desc_count;
+ tx_q->next_to_clean = ntc;
+}
+
+#define idpf_tx_clean_buf_ring_bump_ntc(txq, ntc, buf) \
+do { \
+ (buf)++; \
+ (ntc)++; \
+ if (unlikely((ntc) == (txq)->desc_count)) { \
+ buf = (txq)->tx_buf; \
+ ntc = 0; \
+ } \
+} while (0)
+
+/**
+ * idpf_tx_clean_buf_ring - clean flow scheduling TX queue buffers
+ * @txq: queue to clean
+ * @compl_tag: completion tag of packet to clean (from completion descriptor)
+ * @compl_type: completion type
+ * IDPF_TXD_COMPLT_RS - clean all buffers with given completion tag and
+ * stash any buffers on the ring prior to this packet.
+ *
+ * IDPF_TXD_COMPLT_RULE_MISS - stash the skb and unmap/free DMA buffers.
+ *
+ * IDPF_TXD_COMPLT_REINJECTED - stash buffers with this completion tag and
+ * any buffers on the ring prior to this packet.
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @budget: Used to determine if we are in netpoll
+ *
+ * Cleans all buffers associated with the input completion tag either from the
+ * TX buffer ring or from the hash table if the buffers were previously
+ * stashed. Returns the byte/segment count for the cleaned packet associated
+ * this completion tag.
+ */
+static bool idpf_tx_clean_buf_ring(struct idpf_queue *txq,
+ u16 compl_tag, u8 compl_type,
+ struct idpf_cleaned_stats *cleaned,
+ int budget)
+{
+ u16 idx = compl_tag & txq->compl_tag_bufid_m;
+ struct idpf_tx_buf *tx_buf = NULL;
+ u16 ntc = txq->next_to_clean;
+ u16 num_descs_cleaned = 0;
+ u16 orig_idx = idx;
+
+ tx_buf = &txq->tx_buf[idx];
+
+ while (tx_buf->compl_tag == (int)compl_tag) {
+ if (unlikely(compl_type == IDPF_TXD_COMPLT_REINJECTED)) {
+ idpf_stash_flow_sch_buffers(txq, tx_buf, compl_type);
+ } else if (tx_buf->skb) {
+ if (unlikely(compl_type == IDPF_TXD_COMPLT_RULE_MISS)) {
+ /* Since we received a miss completion, we can
+ * free all of the buffers, but cannot free the
+ * skb or update the stack BQL yet. We will
+ * stash the skb and start the timer to wait
+ * for the reinject completion
+ */
+ idpf_tx_splitq_unmap_hdr(txq, tx_buf);
+
+ idpf_stash_flow_sch_buffers(txq, tx_buf,
+ compl_type);
+ } else {
+ idpf_tx_splitq_clean_hdr(txq, tx_buf, cleaned,
+ budget);
+ }
+ } else if (dma_unmap_len(tx_buf, len)) {
+ dma_unmap_page(txq->dev,
+ dma_unmap_addr(tx_buf, dma),
+ dma_unmap_len(tx_buf, len),
+ DMA_TO_DEVICE);
+ dma_unmap_len_set(tx_buf, len, 0);
+ }
+
+ memset(tx_buf, 0, sizeof(struct idpf_tx_buf));
+ tx_buf->compl_tag = IDPF_SPLITQ_TX_INVAL_COMPL_TAG;
+
+ num_descs_cleaned++;
+ idpf_tx_clean_buf_ring_bump_ntc(txq, idx, tx_buf);
+ }
+
+ /* If we didn't clean anything on the ring for this completion, there's
+ * nothing more to do.
+ */
+ if (unlikely(!num_descs_cleaned))
+ return false;
+
+ /* Otherwise, if we did clean a packet on the ring directly, it's safe
+ * to assume that the descriptors starting from the original
+ * next_to_clean up until the previously cleaned packet can be reused.
+ * Therefore, we will go back in the ring and stash any buffers still
+ * in the ring into the hash table to be cleaned later.
+ */
+ tx_buf = &txq->tx_buf[ntc];
+ while (tx_buf != &txq->tx_buf[orig_idx]) {
+ idpf_stash_flow_sch_buffers(txq, tx_buf, IDPF_TXD_COMPLT_RS);
+ idpf_tx_clean_buf_ring_bump_ntc(txq, ntc, tx_buf);
+ }
+
+ /* Finally, update next_to_clean to reflect the work that was just done
+ * on the ring, if any. If the packet was only cleaned from the hash
+ * table, the ring will not be impacted, therefore we should not touch
+ * next_to_clean. The updated idx is used here
+ */
+ txq->next_to_clean = idx;
+
+ return true;
+}
+
+/**
+ * idpf_tx_handle_miss_completion
+ * @txq: Tx ring to clean
+ * @desc: pointer to completion queue descriptor to extract completion
+ * information from
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @budget: Used to determine if we are in netpoll
+ *
+ * Determines where the packet is located, the hash table or the ring. If the
+ * packet is on the ring, the ring cleaning function will take care of freeing
+ * the DMA buffers and stash the SKB. The stashing function, called inside the
+ * ring cleaning function, will take care of starting the timer.
+ *
+ * If packet is already in the hashtable, determine if we need to finish up the
+ * reinject completion or start the timer to wait for the reinject completion.
+ *
+ * Returns cleaned bytes/packets only if we're finishing up the reinject
+ * completion and freeing the skb. Otherwise, the stats are 0 / irrelevant
+ */
+static void idpf_tx_handle_miss_completion(struct idpf_queue *txq,
+ struct idpf_splitq_tx_compl_desc *desc,
+ struct idpf_cleaned_stats *cleaned,
+ int budget)
+{
+ u16 compl_tag = le16_to_cpu(desc->q_head_compl_tag.compl_tag);
+ struct idpf_tx_stash *stash;
+
+ /* First determine if this packet was already stashed */
+ stash = idpf_tx_find_stashed_bufs(txq, compl_tag);
+ if (!stash) {
+ /* Packet must still be on the ring, go pull it from there. */
+ idpf_tx_clean_buf_ring(txq, compl_tag,
+ IDPF_TXD_COMPLT_RULE_MISS,
+ cleaned, budget);
+ } else {
+ if (stash->miss_pkt)
+ /* If it was previously stashed because
+ * of a reinject completion, we can go
+ * ahead and clean everything up
+ */
+ idpf_tx_clean_stashed_bufs(txq, compl_tag, cleaned,
+ budget);
+ else
+ /* If it was previously stashed because
+ * of an RE completion, we just need to
+ * start the timer while we wait for
+ * the reinject completion
+ */
+ idpf_tx_start_reinject_timer(txq, stash);
+ }
+}
+
+/**
+ * idpf_tx_handle_rs_completion - clean a single packet and all of its buffers
+ * whether on the buffer ring or in the hash table
+ * @txq: Tx ring to clean
+ * @desc: pointer to completion queue descriptor to extract completion
+ * information from
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @budget: Used to determine if we are in netpoll
+ *
+ * Returns bytes/packets cleaned
+ */
+static void idpf_tx_handle_rs_completion(struct idpf_queue *txq,
+ struct idpf_splitq_tx_compl_desc *desc,
+ struct idpf_cleaned_stats *cleaned,
+ int budget)
+{
+ u16 compl_tag;
+
+ if (!test_bit(__IDPF_Q_FLOW_SCH_EN, txq->flags)) {
+ u16 head = le16_to_cpu(desc->q_head_compl_tag.q_head);
+
+ return idpf_tx_splitq_clean(txq, head, budget, cleaned, false);
+ }
+
+ compl_tag = le16_to_cpu(desc->q_head_compl_tag.compl_tag);
+ /* Check for miss completion in tag if enabled */
+ if (unlikely(test_bit(__IDPF_Q_MISS_TAG_EN, txq->flags) &&
+ compl_tag & IDPF_TX_SPLITQ_MISS_COMPL_TAG))
+ return idpf_tx_handle_miss_completion(txq, desc, cleaned,
+ budget);
+
+ /* If we didn't clean anything on the ring, this packet must be
+ * in the hash table. Go clean it there.
+ */
+ if (!idpf_tx_clean_buf_ring(txq, compl_tag, IDPF_TXD_COMPLT_RS,
+ cleaned, budget))
+ idpf_tx_clean_stashed_bufs(txq, compl_tag, cleaned, budget);
+}
+
+/**
+ * idpf_tx_handle_reinject_completion
+ * @txq: Tx ring to clean
+ * @desc: pointer to completion queue descriptor to extract completion
+ * information from
+ * @cleaned: pointer to stats struct to track cleaned packets/bytes
+ * @budget: Used to determine if we are in netpoll
+ */
+static void
+idpf_tx_handle_reinject_completion(struct idpf_queue *txq,
+ struct idpf_splitq_tx_compl_desc *desc,
+ struct idpf_cleaned_stats *cleaned,
+ int budget)
+{
+ u16 compl_tag = le16_to_cpu(desc->q_head_compl_tag.compl_tag);
+ struct idpf_tx_stash *stash;
+
+ /* First check if the packet has already been stashed because of a miss
+ * completion
+ */
+ stash = idpf_tx_find_stashed_bufs(txq, compl_tag);
+ if (stash) {
+ if (stash->miss_pkt)
+ /* If it was previously stashed because of a miss
+ * completion, we can go ahead and clean everything up
+ */
+ idpf_tx_clean_stashed_bufs(txq, compl_tag, cleaned,
+ budget);
+ else
+ /* If it was previously stashed because of a RE or out
+ * of order RS completion, it means we received the
+ * reinject completion before the miss completion.
+ * However, since the packet did take the miss path, it
+ * is guaranteed to get a miss completion Therefore,
+ * mark it as a miss path packet in the hash table so
+ * it will be cleaned upon receiving the miss
+ * completion
+ */
+ stash->miss_pkt = true;
+ } else {
+ /* If it was not in the hash table, the packet is still on the
+ * ring. This is another scenario in which the reinject
+ * completion arrives before the miss completion. We can
+ * simply stash all of the buffers associated with this packet
+ * and any buffers on the ring prior to it. We will clean the
+ * packet and all of its buffers associated with this
+ * completion tag upon receiving the miss completion, and clean
+ * the others upon receiving their respective RS completions.
+ */
+ idpf_tx_clean_buf_ring(txq, compl_tag, IDPF_TXD_COMPLT_REINJECTED,
+ cleaned, budget);
+ }
+
+ /* If the packet is not in the ring or hash table, it means we either
+ * received a regular completion already or the timer expired on the
+ * miss completion. In either case, everything should already be
+ * cleaned up and we should ignore this completion.
+ */
+}
+
+/**
+ * idpf_tx_clean_complq - Reclaim resources on completion queue
+ * @complq: Tx ring to clean
+ * @budget: Used to determine if we are in netpoll
+ * @cleaned: returns number of packets cleaned
+ *
+ * Returns true if there's any budget left (e.g. the clean is finished)
+ */
+static bool idpf_tx_clean_complq(struct idpf_queue *complq, int budget,
+ int *cleaned)
+{
+ struct idpf_splitq_tx_compl_desc *tx_desc;
+ struct idpf_vport *vport = complq->vport;
+ s16 ntc = complq->next_to_clean;
+ unsigned int complq_budget;
+ bool complq_ok = true;
+ int i;
+
+ complq_budget = vport->compln_clean_budget;
+ tx_desc = IDPF_SPLITQ_TX_COMPLQ_DESC(complq, ntc);
+ ntc -= complq->desc_count;
+
+ do {
+ struct idpf_cleaned_stats cleaned_stats = { };
+ struct idpf_queue *tx_q;
+ int rel_tx_qid;
+ u16 hw_head;
+ u8 ctype; /* completion type */
+ u16 gen;
+
+ /* if the descriptor isn't done, no work yet to do */
+ gen = (le16_to_cpu(tx_desc->qid_comptype_gen) &
+ IDPF_TXD_COMPLQ_GEN_M) >> IDPF_TXD_COMPLQ_GEN_S;
+ if (test_bit(__IDPF_Q_GEN_CHK, complq->flags) != gen)
+ break;
+
+ /* Find necessary info of TX queue to clean buffers */
+ rel_tx_qid = (le16_to_cpu(tx_desc->qid_comptype_gen) &
+ IDPF_TXD_COMPLQ_QID_M) >> IDPF_TXD_COMPLQ_QID_S;
+ if (rel_tx_qid >= complq->txq_grp->num_txq ||
+ !complq->txq_grp->txqs[rel_tx_qid]) {
+ dev_err(&complq->vport->adapter->pdev->dev,
+ "TxQ not found\n");
+ goto fetch_next_desc;
+ }
+ tx_q = complq->txq_grp->txqs[rel_tx_qid];
+
+ /* Determine completion type */
+ ctype = (le16_to_cpu(tx_desc->qid_comptype_gen) &
+ IDPF_TXD_COMPLQ_COMPL_TYPE_M) >>
+ IDPF_TXD_COMPLQ_COMPL_TYPE_S;
+ switch (ctype) {
+ case IDPF_TXD_COMPLT_RE:
+ hw_head = le16_to_cpu(tx_desc->q_head_compl_tag.q_head);
+
+ idpf_tx_splitq_clean(tx_q, hw_head, budget,
+ &cleaned_stats, true);
+ break;
+ case IDPF_TXD_COMPLT_RS:
+ idpf_tx_handle_rs_completion(tx_q, tx_desc,
+ &cleaned_stats, budget);
+ break;
+ case IDPF_TXD_COMPLT_SW_MARKER:
+ idpf_tx_handle_sw_marker(tx_q);
+ break;
+ case IDPF_TXD_COMPLT_RULE_MISS:
+ idpf_tx_handle_miss_completion(tx_q, tx_desc,
+ &cleaned_stats, budget);
+ break;
+ case IDPF_TXD_COMPLT_REINJECTED:
+ idpf_tx_handle_reinject_completion(tx_q, tx_desc,
+ &cleaned_stats, budget);
+ break;
+ default:
+ dev_err(&tx_q->vport->adapter->pdev->dev,
+ "Unknown TX completion type: %d\n",
+ ctype);
+ goto fetch_next_desc;
+ }
+
+ u64_stats_update_begin(&tx_q->stats_sync);
+ u64_stats_add(&tx_q->q_stats.tx.packets, cleaned_stats.packets);
+ u64_stats_add(&tx_q->q_stats.tx.bytes, cleaned_stats.bytes);
+ tx_q->cleaned_pkts += cleaned_stats.packets;
+ tx_q->cleaned_bytes += cleaned_stats.bytes;
+ complq->num_completions++;
+ u64_stats_update_end(&tx_q->stats_sync);
+
+fetch_next_desc:
+ tx_desc++;
+ ntc++;
+ if (unlikely(!ntc)) {
+ ntc -= complq->desc_count;
+ tx_desc = IDPF_SPLITQ_TX_COMPLQ_DESC(complq, 0);
+ change_bit(__IDPF_Q_GEN_CHK, complq->flags);
+ }
+
+ prefetch(tx_desc);
+
+ /* update budget accounting */
+ complq_budget--;
+ } while (likely(complq_budget));
+
+ /* Store the state of the complq to be used later in deciding if a
+ * TXQ can be started again
+ */
+ if (unlikely(IDPF_TX_COMPLQ_PENDING(complq->txq_grp) >
+ IDPF_TX_COMPLQ_OVERFLOW_THRESH(complq)))
+ complq_ok = false;
+
+ for (i = 0; i < complq->txq_grp->num_txq; ++i) {
+ struct idpf_queue *tx_q = complq->txq_grp->txqs[i];
+ struct netdev_queue *nq;
+
+ /* We didn't clean anything on this queue, move along */
+ if (!tx_q->cleaned_bytes)
+ continue;
+
+ *cleaned += tx_q->cleaned_pkts;
+
+ /* Update BQL */
+ nq = netdev_get_tx_queue(tx_q->vport->netdev, tx_q->idx);
+ netdev_tx_completed_queue(nq, tx_q->cleaned_pkts, tx_q->cleaned_bytes);
+
+ /* Reset cleaned stats for the next time this queue is cleaned */
+ tx_q->cleaned_bytes = 0;
+ tx_q->cleaned_pkts = 0;
+
+ /* Check if the TXQ needs to and can be restarted */
+ if (unlikely(netif_tx_queue_stopped(nq) && complq_ok &&
+ netif_carrier_ok(tx_q->vport->netdev) &&
+ IDPF_TX_BUF_RSV_LOW(tx_q) &&
+ (IDPF_DESC_UNUSED(tx_q) >= IDPF_TX_WAKE_THRESH))) {
+ /* Make sure any other threads stopping queue after
+ * this see new next_to_clean.
+ */
+ smp_mb();
+ if (complq->vport->state == __IDPF_VPORT_UP)
+ netif_tx_wake_queue(nq);
+ }
+ }
+
+ ntc += complq->desc_count;
+ complq->next_to_clean = ntc;
+
+ return !!complq_budget;
+}
+
/**
* idpf_tx_splitq_build_ctb - populate command tag and size for queue
* based scheduling descriptors
@@ -2275,7 +3032,11 @@ netdev_tx_t idpf_tx_splitq_start(struct sk_buff *skb,
static irqreturn_t idpf_vport_intr_clean_queues(int __always_unused irq,
void *data)
{
- /* stub */
+ struct idpf_q_vector *q_vector = (struct idpf_q_vector *)data;
+
+ q_vector->total_events++;
+ napi_schedule(&q_vector->napi);
+
return IRQ_HANDLED;
}
@@ -2381,6 +3142,121 @@ static void idpf_vport_intr_rel_irq(struct idpf_vport *vport)
}
}
+/**
+ * idpf_vport_intr_dis_irq_all - Disable all interrupt
+ * @vport: main vport structure
+ */
+static void idpf_vport_intr_dis_irq_all(struct idpf_vport *vport)
+{
+ struct idpf_q_vector *q_vector = vport->q_vectors;
+ int q_idx;
+
+ for (q_idx = 0; q_idx < vport->num_q_vectors; q_idx++)
+ writel(0, q_vector[q_idx].intr_reg.dyn_ctl);
+}
+
+/**
+ * idpf_vport_intr_buildreg_itr - Enable default interrupt generation settings
+ * @q_vector: pointer to q_vector
+ * @type: itr index
+ * @itr: itr value
+ */
+static u32 idpf_vport_intr_buildreg_itr(struct idpf_q_vector *q_vector,
+ const int type, u16 itr)
+{
+ u32 itr_val;
+
+ itr &= IDPF_ITR_MASK;
+ /* Don't clear PBA because that can cause lost interrupts that
+ * came in while we were cleaning/polling
+ */
+ itr_val = q_vector->intr_reg.dyn_ctl_intena_m |
+ (type << q_vector->intr_reg.dyn_ctl_itridx_s) |
+ (itr << (q_vector->intr_reg.dyn_ctl_intrvl_s - 1));
+
+ return itr_val;
+}
+
+/**
+ * idpf_update_dim_sample - Update dim sample with packets and bytes
+ * @q_vector: the vector associated with the interrupt
+ * @dim_sample: dim sample to update
+ * @dim: dim instance structure
+ * @packets: total packets
+ * @bytes: total bytes
+ *
+ * Update the dim sample with the packets and bytes which are passed to this
+ * function. Set the dim state appropriately if the dim settings gets stale.
+ */
+static void idpf_update_dim_sample(struct idpf_q_vector *q_vector,
+ struct dim_sample *dim_sample,
+ struct dim *dim, u64 packets, u64 bytes)
+{
+ dim_update_sample(q_vector->total_events, packets, bytes, dim_sample);
+ dim_sample->comp_ctr = 0;
+
+ /* if dim settings get stale, like when not updated for 1 second or
+ * longer, force it to start again. This addresses the frequent case
+ * of an idle queue being switched to by the scheduler.
+ */
+ if (ktime_ms_delta(dim_sample->time, dim->start_sample.time) >= HZ)
+ dim->state = DIM_START_MEASURE;
+}
+
+/**
+ * idpf_net_dim - Update net DIM algorithm
+ * @q_vector: the vector associated with the interrupt
+ *
+ * Create a DIM sample and notify net_dim() so that it can possibly decide
+ * a new ITR value based on incoming packets, bytes, and interrupts.
+ *
+ * This function is a no-op if the queue is not configured to dynamic ITR.
+ */
+static void idpf_net_dim(struct idpf_q_vector *q_vector)
+{
+ struct dim_sample dim_sample = { };
+ u64 packets, bytes;
+ u32 i;
+
+ if (!IDPF_ITR_IS_DYNAMIC(q_vector->tx_intr_mode))
+ return;
+
+ for (i = 0, packets = 0, bytes = 0; i < q_vector->num_txq; i++) {
+ struct idpf_queue *txq = q_vector->tx[i];
+ unsigned int start;
+
+ do {
+ start = u64_stats_fetch_begin(&txq->stats_sync);
+ packets += u64_stats_read(&txq->q_stats.tx.packets);
+ bytes += u64_stats_read(&txq->q_stats.tx.bytes);
+ } while (u64_stats_fetch_retry(&txq->stats_sync, start));
+ }
+
+ idpf_update_dim_sample(q_vector, &dim_sample, &q_vector->tx_dim,
+ packets, bytes);
+ net_dim(&q_vector->tx_dim, dim_sample);
+}
+
+/**
+ * idpf_vport_intr_update_itr_ena_irq - Update itr and re-enable MSIX interrupt
+ * @q_vector: q_vector for which itr is being updated and interrupt enabled
+ *
+ * Update the net_dim() algorithm and re-enable the interrupt associated with
+ * this vector.
+ */
+static void idpf_vport_intr_update_itr_ena_irq(struct idpf_q_vector *q_vector)
+{
+ u32 intval;
+
+ /* net_dim() updates ITR out-of-band using a work item */
+ idpf_net_dim(q_vector);
+
+ intval = idpf_vport_intr_buildreg_itr(q_vector,
+ IDPF_NO_ITR_UPDATE_IDX, 0);
+
+ writel(intval, q_vector->intr_reg.dyn_ctl);
+}
+
/**
* idpf_vport_intr_req_irq - get MSI-X vectors from the OS for the vport
* @vport: main vport structure
@@ -2433,6 +3309,54 @@ static int idpf_vport_intr_req_irq(struct idpf_vport *vport, char *basename)
return err;
}
+/**
+ * idpf_vport_intr_write_itr - Write ITR value to the ITR register
+ * @q_vector: q_vector structure
+ * @itr: Interrupt throttling rate
+ * @tx: Tx or Rx ITR
+ */
+static void idpf_vport_intr_write_itr(struct idpf_q_vector *q_vector,
+ u16 itr, bool tx)
+{
+ struct idpf_intr_reg *intr_reg;
+
+ if (tx && !q_vector->tx)
+ return;
+ else if (!tx && !q_vector->rx)
+ return;
+
+ intr_reg = &q_vector->intr_reg;
+ writel(ITR_REG_ALIGN(itr) >> IDPF_ITR_GRAN_S,
+ tx ? intr_reg->tx_itr : intr_reg->rx_itr);
+}
+
+/**
+ * idpf_vport_intr_ena_irq_all - Enable IRQ for the given vport
+ * @vport: main vport structure
+ */
+static void idpf_vport_intr_ena_irq_all(struct idpf_vport *vport)
+{
+ bool dynamic;
+ int q_idx;
+ u16 itr;
+
+ for (q_idx = 0; q_idx < vport->num_q_vectors; q_idx++) {
+ struct idpf_q_vector *qv = &vport->q_vectors[q_idx];
+
+ /* Set the initial ITR values */
+ if (qv->num_txq) {
+ dynamic = IDPF_ITR_IS_DYNAMIC(qv->tx_intr_mode);
+ itr = vport->tx_itr_profile[qv->tx_dim.profile_ix];
+ idpf_vport_intr_write_itr(qv, dynamic ?
+ itr : qv->tx_itr_value,
+ true);
+ }
+
+ if (qv->num_txq)
+ idpf_vport_intr_update_itr_ena_irq(qv);
+ }
+}
+
/**
* idpf_vport_intr_deinit - Release all vector associations for the vport
* @vport: main vport structure
@@ -2441,9 +3365,47 @@ void idpf_vport_intr_deinit(struct idpf_vport *vport)
{
idpf_vport_intr_napi_dis_all(vport);
idpf_vport_intr_napi_del_all(vport);
+ idpf_vport_intr_dis_irq_all(vport);
idpf_vport_intr_rel_irq(vport);
}
+/**
+ * idpf_tx_dim_work - Call back from the stack
+ * @work: work queue structure
+ */
+static void idpf_tx_dim_work(struct work_struct *work)
+{
+ struct idpf_q_vector *q_vector;
+ struct idpf_vport *vport;
+ struct dim *dim;
+ u16 itr;
+
+ dim = container_of(work, struct dim, work);
+ q_vector = container_of(dim, struct idpf_q_vector, tx_dim);
+ vport = q_vector->vport;
+
+ if (dim->profile_ix >= ARRAY_SIZE(vport->tx_itr_profile))
+ dim->profile_ix = ARRAY_SIZE(vport->tx_itr_profile) - 1;
+
+ /* look up the values in our local table */
+ itr = vport->tx_itr_profile[dim->profile_ix];
+
+ idpf_vport_intr_write_itr(q_vector, itr, true);
+
+ dim->state = DIM_START_MEASURE;
+}
+
+/**
+ * idpf_init_dim - Set up dynamic interrupt moderation
+ * @qv: q_vector structure
+ */
+static void idpf_init_dim(struct idpf_q_vector *qv)
+{
+ INIT_WORK(&qv->tx_dim.work, idpf_tx_dim_work);
+ qv->tx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
+ qv->tx_dim.profile_ix = IDPF_DIM_DEFAULT_PROFILE_IX;
+}
+
/**
* idpf_vport_intr_napi_ena_all - Enable NAPI for all q_vectors in the vport
* @vport: main vport structure
@@ -2458,10 +3420,37 @@ static void idpf_vport_intr_napi_ena_all(struct idpf_vport *vport)
for (q_idx = 0; q_idx < vport->num_q_vectors; q_idx++) {
struct idpf_q_vector *q_vector = &vport->q_vectors[q_idx];
+ idpf_init_dim(q_vector);
napi_enable(&q_vector->napi);
}
}
+/**
+ * idpf_tx_splitq_clean_all- Clean completion queues
+ * @q_vec: queue vector
+ * @budget: Used to determine if we are in netpoll
+ * @cleaned: returns number of packets cleaned
+ *
+ * Returns false if clean is not complete else returns true
+ */
+static bool idpf_tx_splitq_clean_all(struct idpf_q_vector *q_vec,
+ int budget, int *cleaned)
+{
+ int num_txq = q_vec->num_txq;
+ bool clean_complete = true;
+ int i, budget_per_q;
+
+ if (unlikely(!num_txq))
+ return true;
+
+ budget_per_q = DIV_ROUND_UP(budget, num_txq);
+ for (i = 0; i < num_txq; i++)
+ clean_complete &= idpf_tx_clean_complq(q_vec->tx[i],
+ budget_per_q, cleaned);
+
+ return clean_complete;
+}
+
/**
* idpf_vport_splitq_napi_poll - NAPI handler
* @napi: struct from which you get q_vector
@@ -2469,8 +3458,40 @@ static void idpf_vport_intr_napi_ena_all(struct idpf_vport *vport)
*/
static int idpf_vport_splitq_napi_poll(struct napi_struct *napi, int budget)
{
- /* stub */
- return 0;
+ struct idpf_q_vector *q_vector =
+ container_of(napi, struct idpf_q_vector, napi);
+ bool clean_complete;
+ int work_done = 0;
+
+ /* Handle case where we are called by netpoll with a budget of 0 */
+ if (unlikely(!budget)) {
+ idpf_tx_splitq_clean_all(q_vector, budget, &work_done);
+
+ return 0;
+ }
+
+ clean_complete = idpf_tx_splitq_clean_all(q_vector, budget, &work_done);
+
+ /* If work not completed, return budget and polling will return */
+ if (!clean_complete)
+ return budget;
+
+ work_done = min_t(int, work_done, budget - 1);
+
+ /* Exit the polling mode, but don't re-enable interrupts if stack might
+ * poll us due to busy-polling
+ */
+ if (likely(napi_complete_done(napi, work_done)))
+ idpf_vport_intr_update_itr_ena_irq(q_vector);
+
+ /* Switch to poll mode in the tear-down path after sending disable queues
+ * virtchnl message, as the interrupts will be disabled after that
+ */
+ if (unlikely(q_vector->num_txq && test_bit(__IDPF_Q_POLL_MODE,
+ q_vector->tx[0]->flags)))
+ return budget;
+ else
+ return work_done;
}
/**
@@ -2720,6 +3741,8 @@ int idpf_vport_intr_init(struct idpf_vport *vport)
if (err)
goto unroll_vectors_alloc;
+ idpf_vport_intr_ena_irq_all(vport);
+
return 0;
unroll_vectors_alloc:
@@ -13,6 +13,9 @@
#define IDPF_MIN_TXQ_COMPLQ_DESC 256
#define IDPF_MAX_QIDS 256
+#define IDPF_MIN_TX_DESC_NEEDED (MAX_SKB_FRAGS + 6)
+#define IDPF_TX_WAKE_THRESH ((u16)IDPF_MIN_TX_DESC_NEEDED * 2)
+
#define MIN_SUPPORT_TXDID (\
VIRTCHNL2_TXDID_FLEX_FLOW_SCHED |\
VIRTCHNL2_TXDID_FLEX_TSO_CTX)
@@ -77,6 +80,9 @@
#define IDPF_SPLITQ_RX_BUF_DESC(rxq, i) \
(&(((struct virtchnl2_splitq_rx_buf_desc *)((rxq)->desc_ring))[i]))
+#define IDPF_SPLITQ_TX_COMPLQ_DESC(txcq, i) \
+ (&(((struct idpf_splitq_tx_compl_desc *)((txcq)->desc_ring))[i]))
+
#define IDPF_FLEX_TX_DESC(txq, i) \
(&(((union idpf_tx_flex_desc *)((txq)->desc_ring))[i]))
#define IDPF_FLEX_TX_CTX_DESC(txq, i) \
@@ -100,6 +106,7 @@
(txq)->num_completions_pending - (txq)->complq->num_completions)
#define IDPF_TX_SPLITQ_COMPL_TAG_WIDTH 16
+#define IDPF_TX_SPLITQ_MISS_COMPL_TAG BIT(15)
/* Adjust the generation for the completion tag and wrap if necessary */
#define IDPF_TX_ADJ_COMPL_TAG_GEN(txq) \
((++(txq)->compl_tag_cur_gen) >= (txq)->compl_tag_gen_max ? \
@@ -144,7 +151,16 @@ struct idpf_tx_buf {
};
struct idpf_tx_stash {
- /* stub */
+ struct hlist_node hlist;
+ struct timer_list reinject_timer;
+ struct idpf_tx_buf buf;
+ struct idpf_queue *txq;
+ /* Keep track of whether this packet was sent on the exception path
+ * either because the driver received a miss completion and is waiting
+ * on a reinject completion or because the driver received a reinject
+ * completion and is waiting on a follow up completion.
+ */
+ bool miss_pkt;
};
struct idpf_buf_lifo {
@@ -177,6 +193,7 @@ struct idpf_tx_splitq_params {
struct idpf_tx_offload_params offload;
};
+#define IDPF_TX_COMPLQ_CLEAN_BUDGET 256
#define IDPF_TX_MIN_PKT_LEN 17
#define IDPF_TX_DESCS_FOR_SKB_DATA_PTR 1
#define IDPF_TX_DESCS_PER_CACHE_LINE (L1_CACHE_BYTES / \
@@ -338,6 +355,8 @@ enum idpf_queue_flags_t {
*/
__IDPF_RFLQ_GEN_CHK,
__IDPF_Q_FLOW_SCH_EN,
+ __IDPF_Q_SW_MARKER,
+ __IDPF_Q_POLL_MODE,
__IDPF_Q_MISS_TAG_EN,
__IDPF_Q_FLAGS_NBITS,
@@ -371,6 +390,7 @@ struct idpf_q_vector {
int num_txq;
struct idpf_queue **tx;
+ struct dim tx_dim; /* data for net_dim algorithm */
u16 tx_itr_value;
bool tx_intr_mode;
u32 tx_itr_idx;
@@ -384,6 +404,7 @@ struct idpf_q_vector {
int num_bufq;
struct idpf_queue **bufq;
+ u16 total_events; /* net_dim(): number of interrupts processed */
char name[IDPF_INT_NAME_STR_LEN];
};
@@ -392,6 +413,8 @@ struct idpf_rx_queue_stats {
};
struct idpf_tx_queue_stats {
+ u64_stats_t packets;
+ u64_stats_t bytes;
u64_stats_t lso_pkts;
u64_stats_t linearize;
u64_stats_t q_busy;
@@ -399,6 +422,11 @@ struct idpf_tx_queue_stats {
u64_stats_t dma_map_errs;
};
+struct idpf_cleaned_stats {
+ u32 packets;
+ u32 bytes;
+};
+
union idpf_queue_stats {
struct idpf_rx_queue_stats rx;
struct idpf_tx_queue_stats tx;
@@ -406,9 +434,16 @@ union idpf_queue_stats {
#define IDPF_ITR_DYNAMIC 1
#define IDPF_ITR_20K 0x0032
+#define IDPF_ITR_GRAN_S 1 /* Assume ITR granularity is 2us */
+#define IDPF_ITR_MASK 0x1FFE /* ITR register value alignment mask */
+#define ITR_REG_ALIGN(setting) ((setting) & IDPF_ITR_MASK)
+#define IDPF_ITR_IS_DYNAMIC(itr_mode) (itr_mode)
#define IDPF_ITR_TX_DEF IDPF_ITR_20K
#define IDPF_ITR_RX_DEF IDPF_ITR_20K
+/* Index used for 'No ITR' update in DYN_CTL register */
+#define IDPF_NO_ITR_UPDATE_IDX 3
#define IDPF_ITR_IDX_SPACING(spacing, dflt) (spacing ? spacing : dflt)
+#define IDPF_DIM_DEFAULT_PROFILE_IX 1
/* queue associated with a vport */
struct idpf_queue {
@@ -459,6 +494,18 @@ struct idpf_queue {
union idpf_queue_stats q_stats;
struct u64_stats_sync stats_sync;
+ /* Splitq only, TXQ only: When a TX completion is received on the TX
+ * completion queue, it can be for any TXQ associated with that
+ * completion queue. This means we can clean up to N TXQs during a
+ * single call to clean the completion queue. cleaned_bytes|pkts tracks
+ * the clean stats per TXQ during that single call to clean the
+ * completion queue. By doing so, we can update BQL with aggregate
+ * cleaned stats for each TXQ only once at the end of the cleaning
+ * routine.
+ */
+ u32 cleaned_bytes;
+ u16 cleaned_pkts;
+
bool rx_hsplit_en;
u16 rx_hbuf_size; /* Header buffer size */
u16 rx_buf_size;
@@ -695,6 +695,36 @@ static int idpf_wait_for_event(struct idpf_adapter *adapter,
IDPF_WAIT_FOR_EVENT_TIMEO);
}
+/**
+ * idpf_wait_for_marker_event - wait for software marker response
+ * @vport: virtual port data structure
+ *
+ * Returns 0 success, negative on failure.
+ **/
+static int idpf_wait_for_marker_event(struct idpf_vport *vport)
+{
+ int event = 0;
+ int i;
+
+ for (i = 0; i < vport->num_txq; i++)
+ set_bit(__IDPF_Q_SW_MARKER, vport->txqs[i]->flags);
+
+ event = wait_event_timeout(vport->sw_marker_wq,
+ test_and_clear_bit(IDPF_VPORT_SW_MARKER,
+ vport->flags),
+ msecs_to_jiffies(500));
+
+ for (i = 0; i < vport->num_txq; i++)
+ clear_bit(__IDPF_Q_POLL_MODE, vport->txqs[i]->flags);
+
+ if (event)
+ return 0;
+
+ dev_warn(&vport->adapter->pdev->dev, "Failed to receive marker packets\n");
+
+ return -ETIMEDOUT;
+}
+
/**
* idpf_send_ver_msg - send virtchnl version message
* @adapter: Driver specific private structure
@@ -1978,7 +2008,23 @@ int idpf_send_enable_queues_msg(struct idpf_vport *vport)
*/
int idpf_send_disable_queues_msg(struct idpf_vport *vport)
{
- return idpf_send_ena_dis_queues_msg(vport, VIRTCHNL2_OP_DISABLE_QUEUES);
+ int err, i;
+
+ err = idpf_send_ena_dis_queues_msg(vport, VIRTCHNL2_OP_DISABLE_QUEUES);
+ if (err)
+ return err;
+
+ /* switch to poll mode as interrupts will be disabled after disable
+ * queues virtchnl message is sent
+ */
+ for (i = 0; i < vport->num_txq; i++)
+ set_bit(__IDPF_Q_POLL_MODE, vport->txqs[i]->flags);
+
+ /* schedule the napi to receive all the marker packets */
+ for (i = 0; i < vport->num_q_vectors; i++)
+ napi_schedule(&vport->q_vectors[i].napi);
+
+ return idpf_wait_for_marker_event(vport);
}
/**
@@ -2851,6 +2897,7 @@ void idpf_vport_init(struct idpf_vport *vport, struct idpf_vport_max_q *max_q)
struct idpf_adapter *adapter = vport->adapter;
struct virtchnl2_create_vport *vport_msg;
struct idpf_vport_config *vport_config;
+ u16 tx_itr[] = {2, 8, 64, 128, 256};
struct idpf_rss_data *rss_data;
u16 idx = vport->idx;
@@ -2876,6 +2923,9 @@ void idpf_vport_init(struct idpf_vport *vport, struct idpf_vport_max_q *max_q)
ether_addr_copy(vport->default_mac_addr, vport_msg->default_mac_addr);
vport->max_mtu = le16_to_cpu(vport_msg->max_mtu) - IDPF_PACKET_HDR_PAD;
+ /* Initialize Tx profiles for Dynamic Interrupt Moderation */
+ memcpy(vport->tx_itr_profile, tx_itr, IDPF_DIM_PROFILE_SLOTS);
+
idpf_vport_init_num_qs(vport, vport_msg);
idpf_vport_calc_num_q_desc(vport);
idpf_vport_calc_num_q_groups(vport);