@@ -1236,7 +1236,7 @@ static void iavf_configure(struct iavf_adapter *adapter)
for (i = 0; i < adapter->num_active_queues; i++) {
struct iavf_ring *ring = &adapter->rx_rings[i];
- iavf_alloc_rx_buffers(ring, IAVF_DESC_UNUSED(ring));
+ iavf_alloc_rx_buffers(ring);
}
}
@@ -736,7 +736,6 @@ void iavf_clean_rx_ring(struct iavf_ring *rx_ring)
/* Zero out the descriptor ring */
memset(rx_ring->desc, 0, rx_ring->size);
- rx_ring->next_to_alloc = 0;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
}
@@ -792,7 +791,6 @@ int iavf_setup_rx_descriptors(struct iavf_ring *rx_ring)
goto err;
}
- rx_ring->next_to_alloc = 0;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
@@ -812,9 +810,6 @@ static inline void iavf_release_rx_desc(struct iavf_ring *rx_ring, u32 val)
{
rx_ring->next_to_use = val;
- /* update next to alloc since we have filled the ring */
- rx_ring->next_to_alloc = val;
-
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
@@ -828,12 +823,17 @@ static inline void iavf_release_rx_desc(struct iavf_ring *rx_ring, u32 val)
* iavf_alloc_mapped_page - recycle or make a new page
* @rx_ring: ring to use
* @bi: rx_buffer struct to modify
+ * @dev: device used for DMA mapping
+ * @order: page order to allocate
+ * @gfp: GFP mask to allocate page
*
* Returns true if the page was successfully allocated or
* reused.
**/
static bool iavf_alloc_mapped_page(struct iavf_ring *rx_ring,
- struct iavf_rx_buffer *bi)
+ struct iavf_rx_buffer *bi,
+ struct device *dev, u32 order,
+ gfp_t gfp)
{
struct page *page = bi->page;
dma_addr_t dma;
@@ -845,23 +845,21 @@ static bool iavf_alloc_mapped_page(struct iavf_ring *rx_ring,
}
/* alloc new page for storage */
- page = dev_alloc_pages(iavf_rx_pg_order(rx_ring));
+ page = __dev_alloc_pages(gfp, order);
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_page_failed++;
return false;
}
/* map page for use */
- dma = dma_map_page_attrs(rx_ring->dev, page, 0,
- iavf_rx_pg_size(rx_ring),
- DMA_FROM_DEVICE,
- IAVF_RX_DMA_ATTR);
+ dma = dma_map_page_attrs(dev, page, 0, PAGE_SIZE << order,
+ DMA_FROM_DEVICE, IAVF_RX_DMA_ATTR);
/* if mapping failed free memory back to system since
* there isn't much point in holding memory we can't use
*/
- if (dma_mapping_error(rx_ring->dev, dma)) {
- __free_pages(page, iavf_rx_pg_order(rx_ring));
+ if (dma_mapping_error(dev, dma)) {
+ __free_pages(page, order);
rx_ring->rx_stats.alloc_page_failed++;
return false;
}
@@ -898,32 +896,36 @@ static void iavf_receive_skb(struct iavf_ring *rx_ring,
}
/**
- * iavf_alloc_rx_buffers - Replace used receive buffers
+ * __iavf_alloc_rx_buffers - Replace used receive buffers
* @rx_ring: ring to place buffers on
- * @cleaned_count: number of buffers to replace
+ * @to_refill: number of buffers to replace
+ * @gfp: GFP mask to allocate pages
*
- * Returns false if all allocations were successful, true if any fail
+ * Returns 0 if all allocations were successful or the number of buffers left
+ * to refill in case of an allocation failure.
**/
-bool iavf_alloc_rx_buffers(struct iavf_ring *rx_ring, u16 cleaned_count)
+static u32 __iavf_alloc_rx_buffers(struct iavf_ring *rx_ring, u32 to_refill,
+ gfp_t gfp)
{
- u16 ntu = rx_ring->next_to_use;
+ u32 order = iavf_rx_pg_order(rx_ring);
+ struct device *dev = rx_ring->dev;
+ u32 ntu = rx_ring->next_to_use;
union iavf_rx_desc *rx_desc;
struct iavf_rx_buffer *bi;
/* do nothing if no valid netdev defined */
- if (!rx_ring->netdev || !cleaned_count)
- return false;
+ if (unlikely(!rx_ring->netdev || !to_refill))
+ return 0;
rx_desc = IAVF_RX_DESC(rx_ring, ntu);
bi = &rx_ring->rx_bi[ntu];
do {
- if (!iavf_alloc_mapped_page(rx_ring, bi))
- goto no_buffers;
+ if (!iavf_alloc_mapped_page(rx_ring, bi, dev, order, gfp))
+ break;
/* sync the buffer for use by the device */
- dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
- bi->page_offset,
+ dma_sync_single_range_for_device(dev, bi->dma, bi->page_offset,
rx_ring->rx_buf_len,
DMA_FROM_DEVICE);
@@ -943,23 +945,17 @@ bool iavf_alloc_rx_buffers(struct iavf_ring *rx_ring, u16 cleaned_count)
/* clear the status bits for the next_to_use descriptor */
rx_desc->wb.qword1.status_error_len = 0;
-
- cleaned_count--;
- } while (cleaned_count);
+ } while (--to_refill);
if (rx_ring->next_to_use != ntu)
iavf_release_rx_desc(rx_ring, ntu);
- return false;
-
-no_buffers:
- if (rx_ring->next_to_use != ntu)
- iavf_release_rx_desc(rx_ring, ntu);
+ return to_refill;
+}
- /* make sure to come back via polling to try again after
- * allocation failure
- */
- return true;
+void iavf_alloc_rx_buffers(struct iavf_ring *rxr)
+{
+ __iavf_alloc_rx_buffers(rxr, IAVF_DESC_UNUSED(rxr), GFP_KERNEL);
}
/**
@@ -1104,32 +1100,6 @@ static bool iavf_cleanup_headers(struct iavf_ring *rx_ring, struct sk_buff *skb)
return false;
}
-/**
- * iavf_reuse_rx_page - page flip buffer and store it back on the ring
- * @rx_ring: rx descriptor ring to store buffers on
- * @old_buff: donor buffer to have page reused
- *
- * Synchronizes page for reuse by the adapter
- **/
-static void iavf_reuse_rx_page(struct iavf_ring *rx_ring,
- struct iavf_rx_buffer *old_buff)
-{
- struct iavf_rx_buffer *new_buff;
- u16 nta = rx_ring->next_to_alloc;
-
- new_buff = &rx_ring->rx_bi[nta];
-
- /* update, and store next to alloc */
- nta++;
- rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
-
- /* transfer page from old buffer to new buffer */
- new_buff->dma = old_buff->dma;
- new_buff->page = old_buff->page;
- new_buff->page_offset = old_buff->page_offset;
- new_buff->pagecnt_bias = old_buff->pagecnt_bias;
-}
-
/**
* iavf_can_reuse_rx_page - Determine if this page can be reused by
* the adapter for another receive
@@ -1191,30 +1161,26 @@ static bool iavf_can_reuse_rx_page(struct iavf_rx_buffer *rx_buffer)
/**
* iavf_add_rx_frag - Add contents of Rx buffer to sk_buff
- * @rx_ring: rx descriptor ring to transact packets on
- * @rx_buffer: buffer containing page to add
* @skb: sk_buff to place the data into
+ * @rx_buffer: buffer containing page to add
* @size: packet length from rx_desc
+ * @pg_size: Rx buffer page size
*
* This function will add the data contained in rx_buffer->page to the skb.
* It will just attach the page as a frag to the skb.
*
* The function will then update the page offset.
**/
-static void iavf_add_rx_frag(struct iavf_ring *rx_ring,
+static void iavf_add_rx_frag(struct sk_buff *skb,
struct iavf_rx_buffer *rx_buffer,
- struct sk_buff *skb,
- unsigned int size)
+ u32 size, u32 pg_size)
{
#if (PAGE_SIZE < 8192)
- unsigned int truesize = iavf_rx_pg_size(rx_ring) / 2;
+ unsigned int truesize = pg_size / 2;
#else
unsigned int truesize = SKB_DATA_ALIGN(size + IAVF_SKB_PAD);
#endif
- if (!size)
- return;
-
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page,
rx_buffer->page_offset, size, truesize);
@@ -1224,63 +1190,47 @@ static void iavf_add_rx_frag(struct iavf_ring *rx_ring,
#else
rx_buffer->page_offset += truesize;
#endif
+
+ /* We have pulled a buffer for use, so decrement pagecnt_bias */
+ rx_buffer->pagecnt_bias--;
}
/**
- * iavf_get_rx_buffer - Fetch Rx buffer and synchronize data for use
- * @rx_ring: rx descriptor ring to transact packets on
- * @size: size of buffer to add to skb
+ * iavf_sync_rx_buffer - Synchronize received data for use
+ * @dev: device used for DMA mapping
+ * @buf: Rx buffer containing the data
+ * @size: size of the received data
*
- * This function will pull an Rx buffer from the ring and synchronize it
- * for use by the CPU.
+ * This function will synchronize the Rx buffer for use by the CPU.
*/
-static struct iavf_rx_buffer *iavf_get_rx_buffer(struct iavf_ring *rx_ring,
- const unsigned int size)
+static void iavf_sync_rx_buffer(struct device *dev, struct iavf_rx_buffer *buf,
+ u32 size)
{
- struct iavf_rx_buffer *rx_buffer;
-
- rx_buffer = &rx_ring->rx_bi[rx_ring->next_to_clean];
- prefetchw(rx_buffer->page);
- if (!size)
- return rx_buffer;
-
- /* we are reusing so sync this buffer for CPU use */
- dma_sync_single_range_for_cpu(rx_ring->dev,
- rx_buffer->dma,
- rx_buffer->page_offset,
- size,
+ dma_sync_single_range_for_cpu(dev, buf->dma, buf->page_offset, size,
DMA_FROM_DEVICE);
-
- /* We have pulled a buffer for use, so decrement pagecnt_bias */
- rx_buffer->pagecnt_bias--;
-
- return rx_buffer;
}
/**
* iavf_build_skb - Build skb around an existing buffer
- * @rx_ring: Rx descriptor ring to transact packets on
- * @rx_buffer: Rx buffer to pull data from
- * @size: size of buffer to add to skb
+ * @rx_buffer: Rx buffer with the data
+ * @size: size of the data
+ * @pg_size: size of the Rx page
*
* This function builds an skb around an existing Rx buffer, taking care
* to set up the skb correctly and avoid any memcpy overhead.
*/
-static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring,
- struct iavf_rx_buffer *rx_buffer,
- unsigned int size)
+static struct sk_buff *iavf_build_skb(struct iavf_rx_buffer *rx_buffer,
+ u32 size, u32 pg_size)
{
void *va;
#if (PAGE_SIZE < 8192)
- unsigned int truesize = iavf_rx_pg_size(rx_ring) / 2;
+ unsigned int truesize = pg_size / 2;
#else
unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
SKB_DATA_ALIGN(IAVF_SKB_PAD + size);
#endif
struct sk_buff *skb;
- if (!rx_buffer || !size)
- return NULL;
/* prefetch first cache line of first page */
va = page_address(rx_buffer->page) + rx_buffer->page_offset;
net_prefetch(va);
@@ -1301,36 +1251,33 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring,
rx_buffer->page_offset += truesize;
#endif
+ rx_buffer->pagecnt_bias--;
+
return skb;
}
/**
- * iavf_put_rx_buffer - Clean up used buffer and either recycle or free
+ * iavf_put_rx_buffer - Recycle or free used buffer
* @rx_ring: rx descriptor ring to transact packets on
- * @rx_buffer: rx buffer to pull data from
+ * @dev: device used for DMA mapping
+ * @rx_buffer: Rx buffer to handle
+ * @pg_size: Rx page size
*
- * This function will clean up the contents of the rx_buffer. It will
- * either recycle the buffer or unmap it and free the associated resources.
+ * Either recycle the buffer if possible or unmap and free the page.
*/
-static void iavf_put_rx_buffer(struct iavf_ring *rx_ring,
- struct iavf_rx_buffer *rx_buffer)
+static void iavf_put_rx_buffer(struct iavf_ring *rx_ring, struct device *dev,
+ struct iavf_rx_buffer *rx_buffer, u32 pg_size)
{
- if (!rx_buffer)
- return;
-
if (iavf_can_reuse_rx_page(rx_buffer)) {
- /* hand second half of page back to the ring */
- iavf_reuse_rx_page(rx_ring, rx_buffer);
rx_ring->rx_stats.page_reuse_count++;
- } else {
- /* we are not reusing the buffer so unmap it */
- dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
- iavf_rx_pg_size(rx_ring),
- DMA_FROM_DEVICE, IAVF_RX_DMA_ATTR);
- __page_frag_cache_drain(rx_buffer->page,
- rx_buffer->pagecnt_bias);
+ return;
}
+ /* we are not reusing the buffer so unmap it */
+ dma_unmap_page_attrs(dev, rx_buffer->dma, pg_size,
+ DMA_FROM_DEVICE, IAVF_RX_DMA_ATTR);
+ __page_frag_cache_drain(rx_buffer->page, rx_buffer->pagecnt_bias);
+
/* clear contents of buffer_info */
rx_buffer->page = NULL;
}
@@ -1350,14 +1297,6 @@ static bool iavf_is_non_eop(struct iavf_ring *rx_ring,
union iavf_rx_desc *rx_desc,
struct sk_buff *skb)
{
- u32 ntc = rx_ring->next_to_clean + 1;
-
- /* fetch, update, and store next to clean */
- ntc = (ntc < rx_ring->count) ? ntc : 0;
- rx_ring->next_to_clean = ntc;
-
- prefetch(IAVF_RX_DESC(rx_ring, ntc));
-
/* if we are the last buffer then there is nothing else to do */
#define IAVF_RXD_EOF BIT(IAVF_RX_DESC_STATUS_EOF_SHIFT)
if (likely(iavf_test_staterr(rx_desc, IAVF_RXD_EOF)))
@@ -1383,11 +1322,16 @@ static bool iavf_is_non_eop(struct iavf_ring *rx_ring,
static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
{
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+ const gfp_t gfp = GFP_ATOMIC | __GFP_NOWARN;
+ u32 to_refill = IAVF_DESC_UNUSED(rx_ring);
+ u32 pg_size = iavf_rx_pg_size(rx_ring);
struct sk_buff *skb = rx_ring->skb;
- u16 cleaned_count = IAVF_DESC_UNUSED(rx_ring);
- bool failure = false;
+ struct device *dev = rx_ring->dev;
+ u32 ntc = rx_ring->next_to_clean;
+ u32 ring_size = rx_ring->count;
+ u32 cleaned_count = 0;
- while (likely(total_rx_packets < (unsigned int)budget)) {
+ while (likely(cleaned_count < budget)) {
struct iavf_rx_buffer *rx_buffer;
union iavf_rx_desc *rx_desc;
unsigned int size;
@@ -1396,13 +1340,11 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
u64 qword;
/* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= IAVF_RX_BUFFER_WRITE) {
- failure = failure ||
- iavf_alloc_rx_buffers(rx_ring, cleaned_count);
- cleaned_count = 0;
- }
+ if (to_refill >= IAVF_RX_BUFFER_WRITE)
+ to_refill = __iavf_alloc_rx_buffers(rx_ring, to_refill,
+ gfp);
- rx_desc = IAVF_RX_DESC(rx_ring, rx_ring->next_to_clean);
+ rx_desc = IAVF_RX_DESC(rx_ring, ntc);
/* status_error_len will always be zero for unused descriptors
* because it's cleared in cleanup, and overlaps with hdr_addr
@@ -1424,24 +1366,38 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
IAVF_RXD_QW1_LENGTH_PBUF_SHIFT;
iavf_trace(clean_rx_irq, rx_ring, rx_desc, skb);
- rx_buffer = iavf_get_rx_buffer(rx_ring, size);
+ rx_buffer = &rx_ring->rx_bi[ntc];
+
+ /* Very rare, but possible case. The most common reason:
+ * the last fragment contained FCS only, which was then
+ * stripped by the HW.
+ */
+ if (unlikely(!size))
+ goto skip_data;
+
+ iavf_sync_rx_buffer(dev, rx_buffer, size);
/* retrieve a buffer from the ring */
if (skb)
- iavf_add_rx_frag(rx_ring, rx_buffer, skb, size);
+ iavf_add_rx_frag(skb, rx_buffer, size, pg_size);
else
- skb = iavf_build_skb(rx_ring, rx_buffer, size);
+ skb = iavf_build_skb(rx_buffer, size, pg_size);
/* exit if we failed to retrieve a buffer */
if (!skb) {
rx_ring->rx_stats.alloc_buff_failed++;
- if (rx_buffer && size)
- rx_buffer->pagecnt_bias++;
break;
}
- iavf_put_rx_buffer(rx_ring, rx_buffer);
+skip_data:
+ iavf_put_rx_buffer(rx_ring, dev, rx_buffer, pg_size);
+
cleaned_count++;
+ to_refill++;
+ if (unlikely(++ntc == ring_size))
+ ntc = 0;
+
+ prefetch(IAVF_RX_DESC(rx_ring, ntc));
if (iavf_is_non_eop(rx_ring, rx_desc, skb))
continue;
@@ -1488,8 +1444,18 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
total_rx_packets++;
}
+ rx_ring->next_to_clean = ntc;
rx_ring->skb = skb;
+ if (to_refill >= IAVF_RX_BUFFER_WRITE) {
+ to_refill = __iavf_alloc_rx_buffers(rx_ring, to_refill, gfp);
+ /* guarantee a trip back through this routine if there was
+ * a failure
+ */
+ if (unlikely(to_refill))
+ cleaned_count = budget;
+ }
+
u64_stats_update_begin(&rx_ring->syncp);
rx_ring->stats.packets += total_rx_packets;
rx_ring->stats.bytes += total_rx_bytes;
@@ -1497,8 +1463,7 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
rx_ring->q_vector->rx.total_packets += total_rx_packets;
rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
- /* guarantee a trip back through this routine if there was a failure */
- return failure ? budget : (int)total_rx_packets;
+ return cleaned_count;
}
static inline u32 iavf_buildreg_itr(const int type, u16 itr)
@@ -383,7 +383,6 @@ struct iavf_ring {
struct iavf_q_vector *q_vector; /* Backreference to associated vector */
struct rcu_head rcu; /* to avoid race on free */
- u16 next_to_alloc;
struct sk_buff *skb; /* When iavf_clean_rx_ring_irq() must
* return before it sees the EOP for
* the current packet, we save that skb
@@ -426,7 +425,7 @@ static inline unsigned int iavf_rx_pg_order(struct iavf_ring *ring)
#define iavf_rx_pg_size(_ring) (PAGE_SIZE << iavf_rx_pg_order(_ring))
-bool iavf_alloc_rx_buffers(struct iavf_ring *rxr, u16 cleaned_count);
+void iavf_alloc_rx_buffers(struct iavf_ring *rxr);
netdev_tx_t iavf_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
void iavf_clean_tx_ring(struct iavf_ring *tx_ring);
void iavf_clean_rx_ring(struct iavf_ring *rx_ring);
The Rx hotpath code of IAVF is not well-optimized TBH. Before doing any further buffer model changes, shake it up a bit. Notably: 1. Cache more variables on the stack. DMA device, Rx page size, NTC -- these are the most common things used all throughout the hotpath, often in loops on each iteration. Instead of fetching (or even calculating, as with the page size) them from the ring all the time, cache them on the stack at the beginning of the NAPI polling callback. NTC will be written back at the end, the rest are used read-only, so no sync needed. 2. Don't move the recycled buffers around the ring. The idea of passing the page of the right-now-recycled-buffer to a different buffer, in this case, the first one that needs to be allocated, moreover, on each new frame, is fundamentally wrong. It involves a few o' fetches, branches and then writes (and one Rx buffer struct is at least 32 bytes) where they're completely unneeded, but gives no good -- the result is the same as if we'd recycle it inplace, at the same position where it was used. So drop this and let the main refilling function take care of all the buffers, which were processed and now need to be recycled/refilled. 3. Don't allocate with %GPF_ATOMIC on ifup. This involved introducing the @gfp parameter to a couple functions. Doesn't change anything for Rx -> softirq. 4. 1 budget unit == 1 descriptor, not skb. There could be underflow when receiving a lot of fragmented frames. If each of them would consist of 2 frags, it means that we'd process 64 descriptors at the point where we pass the 32th skb to the stack. But the driver would count that only as a half, which could make NAPI re-enable interrupts prematurely and create unnecessary CPU load. 5. Shortcut !size case. It's super rare, but possible -- for example, if the last buffer of the fragmented frame contained only FCS, which was then stripped by the HW. Instead of checking for size several times when processing, quickly reuse the buffer and jump to the skb fields part. 6. Refill the ring after finishing the polling loop. Previously, the loop wasn't starting a new iteration after the 64th desc, meaning that we were always leaving 16 buffers non-refilled until the next NAPI poll. It's better to refill them while they're still hot, so do that right after exiting the loop as well. For a full cycle of 64 descs, there will be 4 refills of 16 descs from now on. Function: add/remove: 4/2 grow/shrink: 0/5 up/down: 473/-647 (-174) + up to 2% performance. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> --- drivers/net/ethernet/intel/iavf/iavf_main.c | 2 +- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 259 +++++++++----------- drivers/net/ethernet/intel/iavf/iavf_txrx.h | 3 +- 3 files changed, 114 insertions(+), 150 deletions(-)