@@ -298,7 +298,7 @@ struct iavf_adapter {
#define IAVF_FLAG_CLIENT_NEEDS_L2_PARAMS BIT(12)
#define IAVF_FLAG_PROMISC_ON BIT(13)
#define IAVF_FLAG_ALLMULTI_ON BIT(14)
-#define IAVF_FLAG_LEGACY_RX BIT(15)
+/* BIT(15) is free, was IAVF_FLAG_LEGACY_RX */
#define IAVF_FLAG_REINIT_ITR_NEEDED BIT(16)
#define IAVF_FLAG_QUEUES_DISABLED BIT(17)
#define IAVF_FLAG_SETUP_NETDEV_FEATURES BIT(18)
@@ -239,29 +239,6 @@ static const struct iavf_stats iavf_gstrings_stats[] = {
#define IAVF_QUEUE_STATS_LEN ARRAY_SIZE(iavf_gstrings_queue_stats)
-/* For now we have one and only one private flag and it is only defined
- * when we have support for the SKIP_CPU_SYNC DMA attribute. Instead
- * of leaving all this code sitting around empty we will strip it unless
- * our one private flag is actually available.
- */
-struct iavf_priv_flags {
- char flag_string[ETH_GSTRING_LEN];
- u32 flag;
- bool read_only;
-};
-
-#define IAVF_PRIV_FLAG(_name, _flag, _read_only) { \
- .flag_string = _name, \
- .flag = _flag, \
- .read_only = _read_only, \
-}
-
-static const struct iavf_priv_flags iavf_gstrings_priv_flags[] = {
- IAVF_PRIV_FLAG("legacy-rx", IAVF_FLAG_LEGACY_RX, 0),
-};
-
-#define IAVF_PRIV_FLAGS_STR_LEN ARRAY_SIZE(iavf_gstrings_priv_flags)
-
/**
* iavf_get_link_ksettings - Get Link Speed and Duplex settings
* @netdev: network interface device structure
@@ -341,8 +318,6 @@ static int iavf_get_sset_count(struct net_device *netdev, int sset)
return IAVF_STATS_LEN +
(IAVF_QUEUE_STATS_LEN * 2 *
netdev->real_num_tx_queues);
- else if (sset == ETH_SS_PRIV_FLAGS)
- return IAVF_PRIV_FLAGS_STR_LEN;
else
return -EINVAL;
}
@@ -384,24 +359,6 @@ static void iavf_get_ethtool_stats(struct net_device *netdev,
rcu_read_unlock();
}
-/**
- * iavf_get_priv_flag_strings - Get private flag strings
- * @netdev: network interface device structure
- * @data: buffer for string data
- *
- * Builds the private flags string table
- **/
-static void iavf_get_priv_flag_strings(struct net_device *netdev, u8 *data)
-{
- unsigned int i;
-
- for (i = 0; i < IAVF_PRIV_FLAGS_STR_LEN; i++) {
- snprintf(data, ETH_GSTRING_LEN, "%s",
- iavf_gstrings_priv_flags[i].flag_string);
- data += ETH_GSTRING_LEN;
- }
-}
-
/**
* iavf_get_stat_strings - Get stat strings
* @netdev: network interface device structure
@@ -440,105 +397,11 @@ static void iavf_get_strings(struct net_device *netdev, u32 sset, u8 *data)
case ETH_SS_STATS:
iavf_get_stat_strings(netdev, data);
break;
- case ETH_SS_PRIV_FLAGS:
- iavf_get_priv_flag_strings(netdev, data);
- break;
default:
break;
}
}
-/**
- * iavf_get_priv_flags - report device private flags
- * @netdev: network interface device structure
- *
- * The get string set count and the string set should be matched for each
- * flag returned. Add new strings for each flag to the iavf_gstrings_priv_flags
- * array.
- *
- * Returns a u32 bitmap of flags.
- **/
-static u32 iavf_get_priv_flags(struct net_device *netdev)
-{
- struct iavf_adapter *adapter = netdev_priv(netdev);
- u32 i, ret_flags = 0;
-
- for (i = 0; i < IAVF_PRIV_FLAGS_STR_LEN; i++) {
- const struct iavf_priv_flags *priv_flags;
-
- priv_flags = &iavf_gstrings_priv_flags[i];
-
- if (priv_flags->flag & adapter->flags)
- ret_flags |= BIT(i);
- }
-
- return ret_flags;
-}
-
-/**
- * iavf_set_priv_flags - set private flags
- * @netdev: network interface device structure
- * @flags: bit flags to be set
- **/
-static int iavf_set_priv_flags(struct net_device *netdev, u32 flags)
-{
- struct iavf_adapter *adapter = netdev_priv(netdev);
- u32 orig_flags, new_flags, changed_flags;
- u32 i;
-
- orig_flags = READ_ONCE(adapter->flags);
- new_flags = orig_flags;
-
- for (i = 0; i < IAVF_PRIV_FLAGS_STR_LEN; i++) {
- const struct iavf_priv_flags *priv_flags;
-
- priv_flags = &iavf_gstrings_priv_flags[i];
-
- if (flags & BIT(i))
- new_flags |= priv_flags->flag;
- else
- new_flags &= ~(priv_flags->flag);
-
- if (priv_flags->read_only &&
- ((orig_flags ^ new_flags) & ~BIT(i)))
- return -EOPNOTSUPP;
- }
-
- /* Before we finalize any flag changes, any checks which we need to
- * perform to determine if the new flags will be supported should go
- * here...
- */
-
- /* Compare and exchange the new flags into place. If we failed, that
- * is if cmpxchg returns anything but the old value, this means
- * something else must have modified the flags variable since we
- * copied it. We'll just punt with an error and log something in the
- * message buffer.
- */
- if (cmpxchg(&adapter->flags, orig_flags, new_flags) != orig_flags) {
- dev_warn(&adapter->pdev->dev,
- "Unable to update adapter->flags as it was modified by another thread...\n");
- return -EAGAIN;
- }
-
- changed_flags = orig_flags ^ new_flags;
-
- /* Process any additional changes needed as a result of flag changes.
- * The changed_flags value reflects the list of bits that were changed
- * in the code above.
- */
-
- /* issue a reset to force legacy-rx change to take effect */
- if (changed_flags & IAVF_FLAG_LEGACY_RX) {
- if (netif_running(netdev)) {
- adapter->flags |= IAVF_FLAG_RESET_NEEDED;
- queue_work(adapter->wq, &adapter->reset_task);
- }
- }
-
- return 0;
-}
-
/**
* iavf_get_msglevel - Get debug message level
* @netdev: network interface device structure
@@ -584,7 +447,6 @@ static void iavf_get_drvinfo(struct net_device *netdev,
strscpy(drvinfo->driver, iavf_driver_name, 32);
strscpy(drvinfo->fw_version, "N/A", 4);
strscpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
- drvinfo->n_priv_flags = IAVF_PRIV_FLAGS_STR_LEN;
}
/**
@@ -1969,8 +1831,6 @@ static const struct ethtool_ops iavf_ethtool_ops = {
.get_strings = iavf_get_strings,
.get_ethtool_stats = iavf_get_ethtool_stats,
.get_sset_count = iavf_get_sset_count,
- .get_priv_flags = iavf_get_priv_flags,
- .set_priv_flags = iavf_set_priv_flags,
.get_msglevel = iavf_get_msglevel,
.set_msglevel = iavf_set_msglevel,
.get_coalesce = iavf_get_coalesce,
@@ -713,9 +713,7 @@ static void iavf_configure_rx(struct iavf_adapter *adapter)
struct iavf_hw *hw = &adapter->hw;
int i;
- /* Legacy Rx will always default to a 2048 buffer size. */
-#if (PAGE_SIZE < 8192)
- if (!(adapter->flags & IAVF_FLAG_LEGACY_RX)) {
+ if (PAGE_SIZE < 8192) {
struct net_device *netdev = adapter->netdev;
/* For jumbo frames on systems with 4K pages we have to use
@@ -732,16 +730,10 @@ static void iavf_configure_rx(struct iavf_adapter *adapter)
(netdev->mtu <= ETH_DATA_LEN))
rx_buf_len = IAVF_RXBUFFER_1536 - NET_IP_ALIGN;
}
-#endif
for (i = 0; i < adapter->num_active_queues; i++) {
adapter->rx_rings[i].tail = hw->hw_addr + IAVF_QRX_TAIL1(i);
adapter->rx_rings[i].rx_buf_len = rx_buf_len;
-
- if (adapter->flags & IAVF_FLAG_LEGACY_RX)
- clear_ring_build_skb_enabled(&adapter->rx_rings[i]);
- else
- set_ring_build_skb_enabled(&adapter->rx_rings[i]);
}
}
@@ -824,17 +824,6 @@ static inline void iavf_release_rx_desc(struct iavf_ring *rx_ring, u32 val)
writel(val, rx_ring->tail);
}
-/**
- * iavf_rx_offset - Return expected offset into page to access data
- * @rx_ring: Ring we are requesting offset of
- *
- * Returns the offset value for ring into the data buffer.
- */
-static inline unsigned int iavf_rx_offset(struct iavf_ring *rx_ring)
-{
- return ring_uses_build_skb(rx_ring) ? IAVF_SKB_PAD : 0;
-}
-
/**
* iavf_alloc_mapped_page - recycle or make a new page
* @rx_ring: ring to use
@@ -879,7 +868,7 @@ static bool iavf_alloc_mapped_page(struct iavf_ring *rx_ring,
bi->dma = dma;
bi->page = page;
- bi->page_offset = iavf_rx_offset(rx_ring);
+ bi->page_offset = IAVF_SKB_PAD;
/* initialize pagecnt_bias to 1 representing we fully own page */
bi->pagecnt_bias = 1;
@@ -1220,7 +1209,7 @@ static void iavf_add_rx_frag(struct iavf_ring *rx_ring,
#if (PAGE_SIZE < 8192)
unsigned int truesize = iavf_rx_pg_size(rx_ring) / 2;
#else
- unsigned int truesize = SKB_DATA_ALIGN(size + iavf_rx_offset(rx_ring));
+ unsigned int truesize = SKB_DATA_ALIGN(size + IAVF_SKB_PAD);
#endif
if (!size)
@@ -1268,71 +1257,6 @@ static struct iavf_rx_buffer *iavf_get_rx_buffer(struct iavf_ring *rx_ring,
return rx_buffer;
}
-/**
- * iavf_construct_skb - Allocate skb and populate it
- * @rx_ring: rx descriptor ring to transact packets on
- * @rx_buffer: rx buffer to pull data from
- * @size: size of buffer to add to skb
- *
- * This function allocates an skb. It then populates it with the page
- * data from the current receive descriptor, taking care to set up the
- * skb correctly.
- */
-static struct sk_buff *iavf_construct_skb(struct iavf_ring *rx_ring,
- struct iavf_rx_buffer *rx_buffer,
- unsigned int size)
-{
- void *va;
-#if (PAGE_SIZE < 8192)
- unsigned int truesize = iavf_rx_pg_size(rx_ring) / 2;
-#else
- unsigned int truesize = SKB_DATA_ALIGN(size);
-#endif
- unsigned int headlen;
- struct sk_buff *skb;
-
- if (!rx_buffer)
- return NULL;
- /* prefetch first cache line of first page */
- va = page_address(rx_buffer->page) + rx_buffer->page_offset;
- net_prefetch(va);
-
- /* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
- IAVF_RX_HDR_SIZE,
- GFP_ATOMIC | __GFP_NOWARN);
- if (unlikely(!skb))
- return NULL;
-
- /* Determine available headroom for copy */
- headlen = size;
- if (headlen > IAVF_RX_HDR_SIZE)
- headlen = eth_get_headlen(skb->dev, va, IAVF_RX_HDR_SIZE);
-
- /* align pull length to size of long to optimize memcpy performance */
- memcpy(__skb_put(skb, headlen), va, ALIGN(headlen, sizeof(long)));
-
- /* update all of the pointers */
- size -= headlen;
- if (size) {
- skb_add_rx_frag(skb, 0, rx_buffer->page,
- rx_buffer->page_offset + headlen,
- size, truesize);
-
- /* buffer is used by skb, update page_offset */
-#if (PAGE_SIZE < 8192)
- rx_buffer->page_offset ^= truesize;
-#else
- rx_buffer->page_offset += truesize;
-#endif
- } else {
- /* buffer is unused, reset bias back to rx_buffer */
- rx_buffer->pagecnt_bias++;
- }
-
- return skb;
-}
-
/**
* iavf_build_skb - Build skb around an existing buffer
* @rx_ring: Rx descriptor ring to transact packets on
@@ -1505,10 +1429,8 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
/* retrieve a buffer from the ring */
if (skb)
iavf_add_rx_frag(rx_ring, rx_buffer, skb, size);
- else if (ring_uses_build_skb(rx_ring))
- skb = iavf_build_skb(rx_ring, rx_buffer, size);
else
- skb = iavf_construct_skb(rx_ring, rx_buffer, size);
+ skb = iavf_build_skb(rx_ring, rx_buffer, size);
/* exit if we failed to retrieve a buffer */
if (!skb) {
@@ -362,7 +362,8 @@ struct iavf_ring {
u16 flags;
#define IAVF_TXR_FLAGS_WB_ON_ITR BIT(0)
-#define IAVF_RXR_FLAGS_BUILD_SKB_ENABLED BIT(1)
+/* BIT(1) is free, was IAVF_RXR_FLAGS_BUILD_SKB_ENABLED */
+/* BIT(2) is free */
#define IAVF_TXRX_FLAGS_VLAN_TAG_LOC_L2TAG1 BIT(3)
#define IAVF_TXR_FLAGS_VLAN_TAG_LOC_L2TAG2 BIT(4)
#define IAVF_RXR_FLAGS_VLAN_TAG_LOC_L2TAG2_2 BIT(5)
@@ -393,21 +394,6 @@ struct iavf_ring {
*/
} ____cacheline_internodealigned_in_smp;
-static inline bool ring_uses_build_skb(struct iavf_ring *ring)
-{
- return !!(ring->flags & IAVF_RXR_FLAGS_BUILD_SKB_ENABLED);
-}
-
-static inline void set_ring_build_skb_enabled(struct iavf_ring *ring)
-{
- ring->flags |= IAVF_RXR_FLAGS_BUILD_SKB_ENABLED;
-}
-
-static inline void clear_ring_build_skb_enabled(struct iavf_ring *ring)
-{
- ring->flags &= ~IAVF_RXR_FLAGS_BUILD_SKB_ENABLED;
-}
-
#define IAVF_ITR_ADAPTIVE_MIN_INC 0x0002
#define IAVF_ITR_ADAPTIVE_MIN_USECS 0x0002
#define IAVF_ITR_ADAPTIVE_MAX_USECS 0x007e
@@ -290,8 +290,7 @@ void iavf_configure_queues(struct iavf_adapter *adapter)
return;
/* Limit maximum frame size when jumbo frames is not enabled */
- if (!(adapter->flags & IAVF_FLAG_LEGACY_RX) &&
- (adapter->netdev->mtu <= ETH_DATA_LEN))
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
max_frame = IAVF_RXBUFFER_1536 - NET_IP_ALIGN;
vqci->vsi_id = adapter->vsi_res->vsi_id;
Ever since build_skb() became stable, the old way with allocating an skb for storing the headers separately, which will be then copied manually, was slower, less flexible and thus obsolete. * it had higher pressure on MM since it actually allocates new pages, which then get split and refcount-biased (NAPI page cache); * it implies memcpy() of packet headers (40+ bytes per each frame); * the actual header length was calculated via eth_get_headlen(), which invokes Flow Dissector and thus wastes a bunch of CPU cycles; * XDP makes it even more weird since it requires headroom for long and also tailroom for some time (since mbuf landed). Take a look at the ice driver, which is built around work-arounds to make XDP work with it. Even on some quite low-end hardware (not a common case for 100G NICs) it was performing worse. The only advantage "legacy-rx" had is that it didn't require any reserved headroom and tailroom. But iavf didn't use this, as it always splits pages into two halves of 2k, while that save would only be useful when striding. And again, XDP effectively removes that sole pro. There's a train of features to land in IAVF soon: Page Pool, XDP, XSk, multi-buffer etc. Each new would require adding more and more Danse Macabre for absolutely no reason, besides making hotpath less and less effective. Remove the "feature" with all the related code. This includes at least one very hot branch (typically hit on each new frame), which was either always-true or always-false at least for a complete NAPI bulk of 64 frames, the whole private flags cruft and so on. Some stats: Function: add/remove: 0/2 grow/shrink: 0/7 up/down: 0/-774 (-774) RO Data: add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-40 (-40) Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> --- drivers/net/ethernet/intel/iavf/iavf.h | 2 +- .../net/ethernet/intel/iavf/iavf_ethtool.c | 140 ------------------ drivers/net/ethernet/intel/iavf/iavf_main.c | 10 +- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 84 +---------- drivers/net/ethernet/intel/iavf/iavf_txrx.h | 18 +-- .../net/ethernet/intel/iavf/iavf_virtchnl.c | 3 +- 6 files changed, 8 insertions(+), 249 deletions(-)