@@ -5,6 +5,8 @@ config ALTERA_TSE
select PHYLIB
select PHYLINK
select PCS_ALTERA_TSE
+ select MDIO_REGMAP
+ select REGMAP_MMIO
help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
@@ -27,14 +27,16 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
+#include <linux/mdio/mdio-regmap.h>
#include <linux/netdevice.h>
#include <linux/of_device.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
-#include <linux/pcs-altera-tse.h>
+#include <linux/pcs-lynx.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/skbuff.h>
#include <asm/cacheflush.h>
@@ -1132,13 +1134,16 @@ static int request_and_map(struct platform_device *pdev, const char *name,
static int altera_tse_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id = NULL;
+ struct regmap_config pcs_regmap_cfg;
struct altera_tse_private *priv;
+ struct mdio_regmap_config mrc;
struct resource *control_port;
+ struct regmap *pcs_regmap;
struct resource *dma_res;
struct resource *pcs_res;
+ struct mii_bus *pcs_bus;
struct net_device *ndev;
void __iomem *descmap;
- int pcs_reg_width = 2;
int ret = -ENODEV;
ndev = alloc_etherdev(sizeof(struct altera_tse_private));
@@ -1255,12 +1260,32 @@ static int altera_tse_probe(struct platform_device *pdev)
* address space, but if it's not the case, we fallback to the mdiophy0
* from the MAC's address space
*/
- ret = request_and_map(pdev, "pcs", &pcs_res,
- &priv->pcs_base);
+ ret = request_and_map(pdev, "pcs", &pcs_res, &priv->pcs_base);
if (ret) {
+ /* If we can't find a dedicated resource for the PCS, fallback
+ * to the internal PCS, that has a different address stride
+ */
priv->pcs_base = priv->mac_dev + tse_csroffs(mdio_phy0);
- pcs_reg_width = 4;
+ pcs_regmap_cfg.reg_bits = 32;
+ /* Values are MDIO-like values, on 16 bits */
+ pcs_regmap_cfg.val_bits = 16;
+ pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(2);
+ } else {
+ pcs_regmap_cfg.reg_bits = 16;
+ pcs_regmap_cfg.val_bits = 16;
+ pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(1);
+ }
+
+ /* Create a regmap for the PCS so that it can be used by the PCS driver */
+ pcs_regmap = devm_regmap_init_mmio(&pdev->dev, priv->pcs_base,
+ &pcs_regmap_cfg);
+ if (IS_ERR(pcs_regmap)) {
+ ret = PTR_ERR(pcs_regmap);
+ goto err_free_netdev;
}
+ mrc.regmap = pcs_regmap;
+ mrc.parent = &pdev->dev;
+ mrc.valid_addr = 0x0;
/* Rx IRQ */
priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq");
@@ -1384,7 +1409,18 @@ static int altera_tse_probe(struct platform_device *pdev)
(unsigned long) control_port->start, priv->rx_irq,
priv->tx_irq);
- priv->pcs = alt_tse_pcs_create(ndev, priv->pcs_base, pcs_reg_width);
+ snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii", ndev->name);
+ pcs_bus = devm_mdio_regmap_register(&pdev->dev, &mrc);
+ if (IS_ERR(pcs_bus)) {
+ ret = PTR_ERR(pcs_bus);
+ goto err_init_pcs;
+ }
+
+ priv->pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
+ if (IS_ERR(priv->pcs)) {
+ ret = PTR_ERR(priv->pcs);
+ goto err_init_pcs;
+ }
priv->phylink_config.dev = &ndev->dev;
priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1407,12 +1443,13 @@ static int altera_tse_probe(struct platform_device *pdev)
if (IS_ERR(priv->phylink)) {
dev_err(&pdev->dev, "failed to create phylink\n");
ret = PTR_ERR(priv->phylink);
- goto err_init_phy;
+ goto err_init_phylink;
}
return 0;
-
-err_init_phy:
+err_init_phylink:
+ lynx_pcs_destroy(priv->pcs);
+err_init_pcs:
unregister_netdev(ndev);
err_register_netdev:
netif_napi_del(&priv->napi);
@@ -1433,6 +1470,8 @@ static int altera_tse_remove(struct platform_device *pdev)
altera_tse_mdio_destroy(ndev);
unregister_netdev(ndev);
phylink_destroy(priv->phylink);
+ lynx_pcs_destroy(priv->pcs);
+
free_netdev(ndev);
return 0;
The newly introduced regmap-based MDIO driver allows for an easy mapping of an mdiodevice onto the memory-mapped TSE PCS, which is actually a Lynx PCS. Convert Altera TSE to use this PCS instead of the pcs-altera-tse, which is nothing more than a memory-mapped Lynx PCS. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V3->V4 : - Use pcs_lynxcreate()/destroy() introduced by Russell - Fix the error path - Add back misplaced KConfig dependencies V2->V3 : No changes V1->V2 : No changes drivers/net/ethernet/altera/Kconfig | 2 + drivers/net/ethernet/altera/altera_tse_main.c | 57 ++++++++++++++++--- 2 files changed, 50 insertions(+), 9 deletions(-)