diff mbox series

[net-next,2/2] net: dsa: microchip: remove KSZ9477 PHY errata handling

Message ID 20230602234019.436513-3-robert.hancock@calian.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Move KSZ9477 errata handling to PHY driver | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/apply fail Patch does not apply to net-next

Commit Message

Robert Hancock June 2, 2023, 11:40 p.m. UTC 
The KSZ9477 PHY errata handling code has now been moved into the Micrel
PHY driver, so it is no longer needed inside the DSA switch driver.
Remove it.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 drivers/net/dsa/microchip/ksz9477.c    | 74 ++------------------------
 drivers/net/dsa/microchip/ksz_common.c |  4 --
 drivers/net/dsa/microchip/ksz_common.h |  1 -
 3 files changed, 4 insertions(+), 75 deletions(-)

Comments

Andrew Lunn June 3, 2023, 2:16 p.m. UTC | #1 
On Fri, Jun 02, 2023 at 05:40:19PM -0600, Robert Hancock wrote:
> The KSZ9477 PHY errata handling code has now been moved into the Micrel
> PHY driver, so it is no longer needed inside the DSA switch driver.
> Remove it.
> 
> Signed-off-by: Robert Hancock <robert.hancock@calian.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 47b54ecf2c6f..7720d53dc7a9 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -889,62 +889,6 @@  static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
 	return interface;
 }
 
-static void ksz9477_port_mmd_write(struct ksz_device *dev, int port,
-				   u8 dev_addr, u16 reg_addr, u16 val)
-{
-	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
-		     MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr));
-	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr);
-	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
-		     MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr));
-	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val);
-}
-
-static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port)
-{
-	/* Apply PHY settings to address errata listed in
-	 * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565
-	 * Silicon Errata and Data Sheet Clarification documents:
-	 *
-	 * Register settings are needed to improve PHY receive performance
-	 */
-	ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b);
-	ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032);
-	ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c);
-	ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060);
-	ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001);
-
-	/* Transmit waveform amplitude can be improved
-	 * (1000BASE-T, 100BASE-TX, 10BASE-Te)
-	 */
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0);
-
-	/* Energy Efficient Ethernet (EEE) feature select must
-	 * be manually disabled (except on KSZ8565 which is 100Mbit)
-	 */
-	if (dev->info->gbit_capable[port])
-		ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000);
-
-	/* Register settings are required to meet data sheet
-	 * supply current specifications
-	 */
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff);
-	ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee);
-}
-
 void ksz9477_get_caps(struct ksz_device *dev, int port,
 		      struct phylink_config *config)
 {
@@ -1011,20 +955,10 @@  void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable 802.1p priority */
 	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
 
-	if (dev->info->internal_phy[port]) {
-		/* do not force flow control */
-		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
-			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
-			     false);
-
-		if (dev->info->phy_errata_9477)
-			ksz9477_phy_errata_setup(dev, port);
-	} else {
-		/* force flow control */
-		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
-			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
-			     true);
-	}
+	/* force flow control for non-PHY ports only */
+	ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+		     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+		     !dev->info->internal_phy[port]);
 
 	if (cpu_port)
 		member = dsa_user_ports(ds);
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 423f944cc34c..42cb5742f552 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1212,7 +1212,6 @@  const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 4,
 		.ops = &ksz9477_dev_ops,
-		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1244,7 +1243,6 @@  const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 2,
 		.ops = &ksz9477_dev_ops,
-		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1276,7 +1274,6 @@  const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 2,
 		.ops = &ksz9477_dev_ops,
-		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1356,7 +1353,6 @@  const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 3,
 		.ops = &ksz9477_dev_ops,
-		.phy_errata_9477 = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 055d61ff3fb8..9c5e8ea229fa 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -47,7 +47,6 @@  struct ksz_chip_data {
 	int port_cnt;
 	u8 port_nirqs;
 	const struct ksz_dev_ops *ops;
-	bool phy_errata_9477;
 	bool ksz87xx_eee_link_erratum;
 	const struct ksz_mib_names *mib_names;
 	int mib_cnt;