From patchwork Thu Jul 20 11:29:35 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nikita Shubin via B4 Relay X-Patchwork-Id: 13320061 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 95A9B17735 for ; Thu, 20 Jul 2023 08:30:06 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPS id BBF5BC0090B; Thu, 20 Jul 2023 08:29:58 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1689841798; bh=PiiHVvGLQia5ORpjTltiUVKZ9Myn2hbz3kY8EcNaLHU=; h=From:Date:Subject:References:In-Reply-To:List-Id:To:Cc:Reply-To: From; b=FCWW92X9tzvMJCVkcsLYdSYjYqUD3bnvnXZpVKpD3CUPNrOivOMwAosayV9FA+s1F Y12xMEDy4fpTHe+E8Jti5YcAXi7MmKv9+/L28EaFvRsRM9JXZXXG9bdHEN0XvyGAO0 v8aeM4HRQfQ6CGjyAXYv87q2EGzytgc64ewhWPWOH6UA/QxmprI/mMF4Q82ysH4G5k qgy/4BoBJPpR6AV+8F/HDXXSUgUto1LI7ZzhUr0o8KmCcjJY7hfHeMWQJptAKm8aLj e3HJIudVmHam6WGZj7w9EqgRWNTjWrMqyc9soSU1zJNnrnYpvYrXhQWxFj64asqHKp MST5e5V3qtIfg== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id AA39BC25B5F; Thu, 20 Jul 2023 08:29:58 +0000 (UTC) From: Nikita Shubin via B4 Relay Date: Thu, 20 Jul 2023 14:29:35 +0300 Subject: [PATCH v3 35/42] ARM: dts: ep93xx: add ts7250 board Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20230605-ep93xx-v3-35-3d63a5f1103e@maquefel.me> References: <20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me> In-Reply-To: <20230605-ep93xx-v3-0-3d63a5f1103e@maquefel.me> List-Id: To: Hartley Sweeten , Lennert Buytenhek , Alexander Sverdlin , Russell King , Lukasz Majewski , Linus Walleij , Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Michael Turquette , Stephen Boyd , Nikita Shubin , Daniel Lezcano , Thomas Gleixner , Alessandro Zummo , Alexandre Belloni , Wim Van Sebroeck , Guenter Roeck , Sebastian Reichel , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Mark Brown , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Vinod Koul , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Damien Le Moal , Sergey Shtylyov , Dmitry Torokhov , Arnd Bergmann , Olof Johansson , soc@kernel.org, Liam Girdwood , Jaroslav Kysela , Takashi Iwai , Andy Shevchenko , Michael Peters , Kris Bahnsen Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-pm@vger.kernel.org, linux-pwm@vger.kernel.org, linux-spi@vger.kernel.org, netdev@vger.kernel.org, dmaengine@vger.kernel.org, linux-mtd@lists.infradead.org, linux-ide@vger.kernel.org, linux-input@vger.kernel.org, alsa-devel@alsa-project.org X-Mailer: b4 0.12.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1689852591; l=6188; i=nikita.shubin@maquefel.me; s=20230718; h=from:subject:message-id; bh=ha5ittSqqPfphW5CaHdpis/fQLU7CJDCkNuAv0g4BaA=; =?utf-8?q?b=3DQmSYbABUx60e?= =?utf-8?q?GH/7OzXmpMZCEJ2vVIKzXtwvNv88OtTJ5ioQKGH3bz0TfpH+wkNkwvYH1nC/bjub?= Y7QPRfoqC0ilRI3fMDaF9idHBkcMV2tZrtOdW6l5ZrgsyS9pER9y X-Developer-Key: i=nikita.shubin@maquefel.me; a=ed25519; pk=vqf5YIUJ7BJv3EJFaNNxWZgGuMgDH6rwufTLflwU9ac= X-Endpoint-Received: by B4 Relay for nikita.shubin@maquefel.me/20230718 with auth_id=65 X-Original-From: Nikita Shubin Reply-To: From: Nikita Shubin Add device tree file for Technologic Systems ts7250 board and Liebherr bk3 board which have many in common, both are based on ep9302 SoC variant. Signed-off-by: Nikita Shubin --- arch/arm/boot/dts/cirrus/Makefile | 3 + arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 126 +++++++++++++++++++++++++ arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 145 +++++++++++++++++++++++++++++ 3 files changed, 274 insertions(+) diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile index e944d3e2129d..211a7e2f2115 100644 --- a/arch/arm/boot/dts/cirrus/Makefile +++ b/arch/arm/boot/dts/cirrus/Makefile @@ -3,3 +3,6 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb +dtb-$(CONFIG_ARCH_EP93XX) += \ + ep93xx-bk3.dtb \ + ep93xx-ts7250.dtb diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts new file mode 100644 index 000000000000..91d76a1a8571 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + model = "Liebherr controller BK3.1"; + compatible = "liebherr,bk3", "cirrus,ep9301"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x00000000 0x02000000>, + <0x000530c0 0x01fdd000>; + }; + + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "System"; + reg = <0x00000000 0x01e00000>; + read-only; + }; + + partition@1e00000 { + label = "Data"; + reg = <0x01e00000 0x05f20000>; + }; + + partition@7d20000 { + label = "RedBoot"; + reg = <0x07d20000 0x002e0000>; + read-only; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&i2s_on_ac97_pins>; + status = "okay"; +}; + +&gpio1 { + /* PWM */ + gpio-ranges = <&pinctrl 6 163 1>; +}; + +&gpio4 { + gpio-ranges = <&pinctrl 0 97 2>; + status = "okay"; +}; + +&gpio6 { + gpio-ranges = <&pinctrl 0 87 2>; + status = "okay"; +}; + +&gpio7 { + gpio-ranges = <&pinctrl 2 199 4>; + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts new file mode 100644 index 000000000000..625202f8cd25 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" +#include + +/ { + compatible = "technologic,ts7250", "cirrus,ep9301"; + model = "TS-7250 SBC"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x00000000 0x02000000>, + <0x000530c0 0x01fdd000>; + }; + + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "TS-BOOTROM"; + reg = <0x00000000 0x00020000>; + read-only; + }; + + partition@20000 { + label = "Linux"; + reg = <0x00020000 0x07d00000>; + }; + + partition@7d20000 { + label = "RedBoot"; + reg = <0x07d20000 0x002e0000>; + read-only; + }; + }; + }; + }; + + rtc1: rtc@10800000 { + compatible = "st,m48t86"; + reg = <0x10800000 0x1>, + <0x11700000 0x1>; + }; + + watchdog1: watchdog@23800000 { + compatible = "technologic,ts7200-wdt"; + reg = <0x23800000 0x01>, + <0x23c00000 0x01>; + timeout-sec = <30>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&gpio1 { + /* PWM */ + gpio-ranges = <&pinctrl 6 163 1>; +}; + +&gpio4 { + gpio-ranges = <&pinctrl 0 97 2>; + status = "okay"; +}; + +&gpio6 { + gpio-ranges = <&pinctrl 0 87 2>; + status = "okay"; +}; + +&gpio7 { + gpio-ranges = <&pinctrl 2 199 4>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&spi0 { + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + dmas = <&dma1 EP93XX_DMA_SSP>; + status = "okay"; + + tmp122_spi: tmp122@0 { + compatible = "ti,tmp122"; + reg = <0>; + spi-max-frequency = <2000000>; + }; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +};