| Message ID | 20230612092355.87937-21-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | arm64: qcom: sa8775p-ride: enable the first ethernet port | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
On 12/06/2023 11:23, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add the compatible for the MAC controller on sa8775p platforms. This MAC > works with a single interrupt so add minItems to the interrupts property. > The fourth clock's name is different here so change it. Enable relevant > PHY properties. > I think the patch should be squashed with previous. Adding compatible to common snps,dwmac binding does not make sense on its own. It makes sense with adding compatible here. > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > .../devicetree/bindings/net/qcom,ethqos.yaml | 14 +++++++++++++- > 1 file changed, 13 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml > index 60a38044fb19..b20847c275ce 100644 > --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml > +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml > @@ -20,6 +20,7 @@ properties: > compatible: > enum: > - qcom,qcs404-ethqos > + - qcom,sa8775p-ethqos > - qcom,sc8280xp-ethqos > - qcom,sm8150-ethqos > > @@ -32,11 +33,13 @@ properties: > - const: rgmii > > interrupts: > + minItems: 1 > items: > - description: Combined signal for various interrupt events > - description: The interrupt that occurs when Rx exits the LPI state > > interrupt-names: > + minItems: 1 > items: > - const: macirq > - const: eth_lpi > @@ -49,11 +52,20 @@ properties: > - const: stmmaceth > - const: pclk > - const: ptp_ref > - - const: rgmii > + - enum: > + - rgmii > + - phyaux > > iommus: > maxItems: 1 > > + phys: true > + > + phy-supply: true Isn't this property of the phy? > + > + phy-names: > + const: serdes Keep the phy-names after phys. Best regards, Krzysztof
On Wed, Jun 14, 2023 at 9:25 AM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 12/06/2023 11:23, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > > > Add the compatible for the MAC controller on sa8775p platforms. This MAC > > works with a single interrupt so add minItems to the interrupts property. > > The fourth clock's name is different here so change it. Enable relevant > > PHY properties. > > > > I think the patch should be squashed with previous. Adding compatible to > common snps,dwmac binding does not make sense on its own. It makes sense > with adding compatible here. > > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > --- > > .../devicetree/bindings/net/qcom,ethqos.yaml | 14 +++++++++++++- > > 1 file changed, 13 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml > > index 60a38044fb19..b20847c275ce 100644 > > --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml > > +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml > > @@ -20,6 +20,7 @@ properties: > > compatible: > > enum: > > - qcom,qcs404-ethqos > > + - qcom,sa8775p-ethqos > > - qcom,sc8280xp-ethqos > > - qcom,sm8150-ethqos > > > > @@ -32,11 +33,13 @@ properties: > > - const: rgmii > > > > interrupts: > > + minItems: 1 > > items: > > - description: Combined signal for various interrupt events > > - description: The interrupt that occurs when Rx exits the LPI state > > > > interrupt-names: > > + minItems: 1 > > items: > > - const: macirq > > - const: eth_lpi > > @@ -49,11 +52,20 @@ properties: > > - const: stmmaceth > > - const: pclk > > - const: ptp_ref > > - - const: rgmii > > + - enum: > > + - rgmii > > + - phyaux > > > > iommus: > > maxItems: 1 > > > > + phys: true > > + > > + phy-supply: true > > Isn't this property of the phy? > It is, and as discussed elsewhere with Andrew, I will move it to the SerDes PHY driver. Bart > > + > > + phy-names: > > + const: serdes > > Keep the phy-names after phys. > > > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 60a38044fb19..b20847c275ce 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos - qcom,sc8280xp-ethqos - qcom,sm8150-ethqos @@ -32,11 +33,13 @@ properties: - const: rgmii interrupts: + minItems: 1 items: - description: Combined signal for various interrupt events - description: The interrupt that occurs when Rx exits the LPI state interrupt-names: + minItems: 1 items: - const: macirq - const: eth_lpi @@ -49,11 +52,20 @@ properties: - const: stmmaceth - const: pclk - const: ptp_ref - - const: rgmii + - enum: + - rgmii + - phyaux iommus: maxItems: 1 + phys: true + + phy-supply: true + + phy-names: + const: serdes + required: - compatible - clocks