| Message ID | 20230615121419.175862-20-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | arm64: qcom: sa8775p-ride: enable the first ethernet port | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
On 15.06.2023 14:14, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add the internal SGMII/SerDes PHY node for sa8775p platforms. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > index b130136acffe..b6d95813c98c 100644 > --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > @@ -1837,6 +1837,15 @@ adreno_smmu: iommu@3da0000 { > <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; > }; > > + serdes0: phy@8901000 { > + compatible = "qcom,sa8775p-dwmac-sgmii-phy"; > + reg = <0x0 0x08901000 0x0 0xe10>; > + clocks = <&gcc GCC_SGMI_CLKREF_EN>; > + clock-names = "sgmi_ref"; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sa8775p-pdc", "qcom,pdc"; > reg = <0x0 0x0b220000 0x0 0x30000>,
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index b130136acffe..b6d95813c98c 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -1837,6 +1837,15 @@ adreno_smmu: iommu@3da0000 { <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; }; + serdes0: phy@8901000 { + compatible = "qcom,sa8775p-dwmac-sgmii-phy"; + reg = <0x0 0x08901000 0x0 0xe10>; + clocks = <&gcc GCC_SGMI_CLKREF_EN>; + clock-names = "sgmi_ref"; + #phy-cells = <0>; + status = "disabled"; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>,