diff mbox series

[net-next,v4,2/3] leds: trigger: netdev: add additional specific link duplex mode

Message ID 20230617115355.22868-3-ansuelsmth@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series leds: trigger: netdev: add additional modes | expand

Commit Message

Christian Marangi June 17, 2023, 11:53 a.m. UTC 
Add additional modes for specific link duplex. Use ethtool APIs to get the
current link duplex and enable the LED accordingly. Under netdev event
handler the rtnl lock is already held and is not needed to be set to
access ethtool APIs.

This is especially useful for PHY and Switch that supports LEDs hw
control for specific link duplex.

Add additional modes:
- half_duplex: Turn on LED when link is half duplex
- full_duplex: Turn on LED when link is full duplex

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/leds/trigger/ledtrig-netdev.c | 27 +++++++++++++++++++++++++--
 include/linux/leds.h                  |  2 ++
 2 files changed, 27 insertions(+), 2 deletions(-)

Comments

Andrew Lunn June 18, 2023, 8:10 p.m. UTC | #1 
On Sat, Jun 17, 2023 at 01:53:54PM +0200, Christian Marangi wrote:
> Add additional modes for specific link duplex. Use ethtool APIs to get the
> current link duplex and enable the LED accordingly. Under netdev event
> handler the rtnl lock is already held and is not needed to be set to
> access ethtool APIs.
> 
> This is especially useful for PHY and Switch that supports LEDs hw
> control for specific link duplex.
> 
> Add additional modes:
> - half_duplex: Turn on LED when link is half duplex
> - full_duplex: Turn on LED when link is full duplex
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index 8e6132f069af..90b682d49998 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -55,6 +55,7 @@  struct led_netdev_data {
 
 	unsigned long mode;
 	int link_speed;
+	u8 duplex;
 
 	bool carrier_link_up;
 	bool hw_control;
@@ -98,6 +99,14 @@  static void set_baseline_state(struct led_netdev_data *trigger_data)
 		    trigger_data->link_speed == SPEED_1000)
 			blink_on = true;
 
+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
+		    trigger_data->duplex == DUPLEX_HALF)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) &&
+		    trigger_data->duplex == DUPLEX_FULL)
+			blink_on = true;
+
 		if (blink_on)
 			led_set_brightness(led_cdev,
 					   led_cdev->blink_brightness);
@@ -190,8 +199,10 @@  static void get_device_state(struct led_netdev_data *trigger_data)
 	if (!trigger_data->carrier_link_up)
 		return;
 
-	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
+	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) {
 		trigger_data->link_speed = cmd.base.speed;
+		trigger_data->duplex = cmd.base.duplex;
+	}
 }
 
 static ssize_t device_name_show(struct device *dev,
@@ -230,6 +241,7 @@  static int set_device_name(struct led_netdev_data *trigger_data,
 
 	trigger_data->carrier_link_up = false;
 	trigger_data->link_speed = SPEED_UNKNOWN;
+	trigger_data->duplex = DUPLEX_UNKNOWN;
 	if (trigger_data->net_dev != NULL) {
 		rtnl_lock();
 		get_device_state(trigger_data);
@@ -274,6 +286,8 @@  static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
 	case TRIGGER_NETDEV_LINK_10:
 	case TRIGGER_NETDEV_LINK_100:
 	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_HALF_DUPLEX:
+	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
 	case TRIGGER_NETDEV_RX:
 		bit = attr;
@@ -302,6 +316,8 @@  static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
 	case TRIGGER_NETDEV_LINK_10:
 	case TRIGGER_NETDEV_LINK_100:
 	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_HALF_DUPLEX:
+	case TRIGGER_NETDEV_FULL_DUPLEX:
 	case TRIGGER_NETDEV_TX:
 	case TRIGGER_NETDEV_RX:
 		bit = attr;
@@ -348,6 +364,8 @@  DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
 DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
 DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
 DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
+DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
 DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
 DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
 
@@ -394,6 +412,8 @@  static struct attribute *netdev_trig_attrs[] = {
 	&dev_attr_link_10.attr,
 	&dev_attr_link_100.attr,
 	&dev_attr_link_1000.attr,
+	&dev_attr_full_duplex.attr,
+	&dev_attr_half_duplex.attr,
 	&dev_attr_rx.attr,
 	&dev_attr_tx.attr,
 	&dev_attr_interval.attr,
@@ -425,6 +445,7 @@  static int netdev_trig_notify(struct notifier_block *nb,
 
 	trigger_data->carrier_link_up = false;
 	trigger_data->link_speed = SPEED_UNKNOWN;
+	trigger_data->duplex = DUPLEX_UNKNOWN;
 	switch (evt) {
 	case NETDEV_CHANGENAME:
 		get_device_state(trigger_data);
@@ -486,7 +507,9 @@  static void netdev_trig_work(struct work_struct *work)
 		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
 			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
-			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode);
+			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
 		interval = jiffies_to_msecs(
 				atomic_read(&trigger_data->interval));
 		/* base state is ON (link present) */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 39f15b1e772c..7d428100b42b 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -585,6 +585,8 @@  enum led_trigger_netdev_modes {
 	TRIGGER_NETDEV_LINK_10,
 	TRIGGER_NETDEV_LINK_100,
 	TRIGGER_NETDEV_LINK_1000,
+	TRIGGER_NETDEV_HALF_DUPLEX,
+	TRIGGER_NETDEV_FULL_DUPLEX,
 	TRIGGER_NETDEV_TX,
 	TRIGGER_NETDEV_RX,