diff mbox series

[v4,05/12] can: m_can: Add tx coalescing ethtool support

Message ID 20230621092350.3130866-6-msp@baylibre.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series can: m_can: Optimizations for m_can/tcan part 2 | expand

Checks

Context Check Description
netdev/tree_selection success Series ignored based on subject

Commit Message

Markus Schneider-Pargmann June 21, 2023, 9:23 a.m. UTC 
Add TX support to get/set functions for ethtool coalescing.
tx-frames-irq and tx-usecs-irq can only be set/unset together.
tx-frames-irq needs to be less than TXE and TXB.

As rx and tx share the same timer, rx-usecs-irq and tx-usecs-irq can be
enabled/disabled individually but they need to have the same value if
enabled.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
---
 drivers/net/can/m_can/m_can.c | 38 ++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 5238a5967971..d1435d1466b2 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1953,6 +1953,8 @@  static int m_can_get_coalesce(struct net_device *dev,
 
 	ec->rx_max_coalesced_frames_irq = cdev->rx_max_coalesced_frames_irq;
 	ec->rx_coalesce_usecs_irq = cdev->rx_coalesce_usecs_irq;
+	ec->tx_max_coalesced_frames_irq = cdev->tx_max_coalesced_frames_irq;
+	ec->tx_coalesce_usecs_irq = cdev->tx_coalesce_usecs_irq;
 
 	return 0;
 }
@@ -1979,16 +1981,50 @@  static int m_can_set_coalesce(struct net_device *dev,
 		netdev_err(dev, "rx-frames-irq and rx-usecs-irq can only be set together\n");
 		return -EINVAL;
 	}
+	if (ec->tx_max_coalesced_frames_irq > cdev->mcfg[MRAM_TXE].num) {
+		netdev_err(dev, "tx-frames-irq %u greater than the TX event FIFO %u\n",
+			   ec->tx_max_coalesced_frames_irq,
+			   cdev->mcfg[MRAM_TXE].num);
+		return -EINVAL;
+	}
+	if (ec->tx_max_coalesced_frames_irq > cdev->mcfg[MRAM_TXB].num) {
+		netdev_err(dev, "tx-frames-irq %u greater than the TX FIFO %u\n",
+			   ec->tx_max_coalesced_frames_irq,
+			   cdev->mcfg[MRAM_TXB].num);
+		return -EINVAL;
+	}
+	if (ec->tx_max_coalesced_frames_irq == 0 != ec->tx_coalesce_usecs_irq == 0) {
+		netdev_err(dev, "tx-frames-irq and tx-usecs-irq can only be set together\n");
+		return -EINVAL;
+	}
+	if (ec->rx_coalesce_usecs_irq != 0 && ec->tx_coalesce_usecs_irq != 0 &&
+	    ec->rx_coalesce_usecs_irq != ec->tx_coalesce_usecs_irq) {
+		netdev_err(dev, "rx-usecs-irq %u needs to be equal to tx-usecs-irq %u if both are enabled\n",
+			   ec->rx_coalesce_usecs_irq,
+			   ec->tx_coalesce_usecs_irq);
+		return -EINVAL;
+	}
 
 	cdev->rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
 	cdev->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
+	cdev->tx_max_coalesced_frames_irq = ec->tx_max_coalesced_frames_irq;
+	cdev->tx_coalesce_usecs_irq = ec->tx_coalesce_usecs_irq;
+
+	if (cdev->rx_coalesce_usecs_irq)
+		cdev->irq_timer_wait =
+			ns_to_ktime(cdev->rx_coalesce_usecs_irq * NSEC_PER_USEC);
+	else
+		cdev->irq_timer_wait =
+			ns_to_ktime(cdev->tx_coalesce_usecs_irq * NSEC_PER_USEC);
 
 	return 0;
 }
 
 static const struct ethtool_ops m_can_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
-		ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
+		ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |
+		ETHTOOL_COALESCE_TX_USECS_IRQ |
+		ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ,
 	.get_ts_info = ethtool_op_get_ts_info,
 	.get_coalesce = m_can_get_coalesce,
 	.set_coalesce = m_can_set_coalesce,