| Message ID | 20230710102751.83314-5-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | spi: Header and core clean up and refactoring | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > and kill the not used anymore definitions. The above is not what this change does: > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
On Mon, Jul 10, 2023 at 12:04:35PM +0100, Mark Brown wrote: > On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > and kill the not used anymore definitions. > > The above is not what this change does: How to improve it? I was sure that the form of "converting to something and something" is clear... > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
On Mon, Jul 10, 2023 at 02:08:00PM +0300, Andy Shevchenko wrote: > On Mon, Jul 10, 2023 at 12:04:35PM +0100, Mark Brown wrote: > > On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > and kill the not used anymore definitions. > > The above is not what this change does: > How to improve it? I was sure that the form of "converting to something and > something" is clear... > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; The change here is not the change that is described above.
On Mon, Jul 10, 2023 at 02:08:00PM +0300, Andy Shevchenko wrote: > On Mon, Jul 10, 2023 at 12:04:35PM +0100, Mark Brown wrote: > > On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > and kill the not used anymore definitions. > > > > The above is not what this change does: > > How to improve it? I was sure that the form of "converting to something and > something" is clear... A wild guess, maybe you meant to split to two changes, one per each macro group? > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
On Mon, Jul 10, 2023 at 12:10:03PM +0100, Mark Brown wrote: > On Mon, Jul 10, 2023 at 02:08:00PM +0300, Andy Shevchenko wrote: > > On Mon, Jul 10, 2023 at 12:04:35PM +0100, Mark Brown wrote: > > > On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > > > > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > > and kill the not used anymore definitions. > > > > The above is not what this change does: > > > How to improve it? I was sure that the form of "converting to something and > > something" is clear... > > > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; > > The change here is not the change that is described above. Okay, than you for elaboration and review. With the assumed split it should be addressed. Besides that, should I resend the entire series or only this one?
On Mon, Jul 10, 2023 at 02:10:53PM +0300, Andy Shevchenko wrote: > On Mon, Jul 10, 2023 at 02:08:00PM +0300, Andy Shevchenko wrote: > > On Mon, Jul 10, 2023 at 12:04:35PM +0100, Mark Brown wrote: > > > On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > > and kill the not used anymore definitions. > > > The above is not what this change does: > > How to improve it? I was sure that the form of "converting to something and > > something" is clear... > A wild guess, maybe you meant to split to two changes, one per each macro group? No, doing TX and RX in one commit is fine. > > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; What part of the above change is replacing _NO_ with _MUST_?
On Mon, Jul 10, 2023 at 12:22:59PM +0100, Mark Brown wrote: > On Mon, Jul 10, 2023 at 02:10:53PM +0300, Andy Shevchenko wrote: > > On Mon, Jul 10, 2023 at 02:08:00PM +0300, Andy Shevchenko wrote: > > > On Mon, Jul 10, 2023 at 12:04:35PM +0100, Mark Brown wrote: > > > > On Mon, Jul 10, 2023 at 01:27:47PM +0300, Andy Shevchenko wrote: > > > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > > > and kill the not used anymore definitions. > > > > > The above is not what this change does: > > > > How to improve it? I was sure that the form of "converting to something and > > > something" is clear... > > > A wild guess, maybe you meant to split to two changes, one per each macro group? > > No, doing TX and RX in one commit is fine. No, I meant one per _NO_ and _MUST_. > > > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; > > What part of the above change is replacing _NO_ with _MUST_? None, that's why assuming the split by name should be fine.
On Mon, Jul 10, 2023 at 03:37:59PM +0300, Andy Shevchenko wrote: > On Mon, Jul 10, 2023 at 12:22:59PM +0100, Mark Brown wrote: > > On Mon, Jul 10, 2023 at 02:10:53PM +0300, Andy Shevchenko wrote: > > > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > > > > and kill the not used anymore definitions. ... > > > > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; > > What part of the above change is replacing _NO_ with _MUST_? > None, that's why assuming the split by name should be fine. That's what the above changelog sounds like it's trying to do (I'm not sure the change itself makes sense but the first thing I ran into when reviewing the patch), AFIACT you're missing a "from" in the changelog?
On Mon, Jul 10, 2023 at 02:21:05PM +0100, Mark Brown wrote: > On Mon, Jul 10, 2023 at 03:37:59PM +0300, Andy Shevchenko wrote: > > On Mon, Jul 10, 2023 at 12:22:59PM +0100, Mark Brown wrote: > > > On Mon, Jul 10, 2023 at 02:10:53PM +0300, Andy Shevchenko wrote: ... > > > > > > > Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X > > > > > > > and kill the not used anymore definitions. ... > > > > > > > - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; > > > > > > > + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; > > > > What part of the above change is replacing _NO_ with _MUST_? > > > None, that's why assuming the split by name should be fine. > > That's what the above changelog sounds like it's trying to do (I'm not > sure the change itself makes sense but the first thing I ran into when > reviewing the patch), AFIACT you're missing a "from" in the changelog? I see, I will elaborate better in v2. But still, I will split on per macro and add one for GPIO_SS. Seems to me better that way.
diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c index 7854d9790fe9..7dfe2b6c2990 100644 --- a/drivers/spi/spi-at91-usart.c +++ b/drivers/spi/spi-at91-usart.c @@ -527,7 +527,7 @@ static int at91_usart_spi_probe(struct platform_device *pdev) controller->dev.of_node = pdev->dev.parent->of_node; controller->bits_per_word_mask = SPI_BPW_MASK(8); controller->setup = at91_usart_spi_setup; - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; controller->transfer_one = at91_usart_spi_transfer_one; controller->prepare_message = at91_usart_spi_prepare_message; controller->unprepare_message = at91_usart_spi_unprepare_message; diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 152cd6773403..0865993005b2 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1475,7 +1475,7 @@ static int atmel_spi_probe(struct platform_device *pdev) host->bus_num = pdev->id; host->num_chipselect = 4; host->setup = atmel_spi_setup; - host->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX | + host->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX | SPI_MASTER_GPIO_SS); host->transfer_one = atmel_spi_one_transfer; host->set_cs = atmel_spi_set_cs; diff --git a/drivers/spi/spi-bitbang-txrx.h b/drivers/spi/spi-bitbang-txrx.h index 2dcbe166df63..0cab48b7875b 100644 --- a/drivers/spi/spi-bitbang-txrx.h +++ b/drivers/spi/spi-bitbang-txrx.h @@ -57,7 +57,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi, for (word <<= (32 - bits); likely(bits); bits--) { /* setup MSB (to slave) on trailing edge */ - if ((flags & SPI_MASTER_NO_TX) == 0) { + if ((flags & SPI_CONTROLLER_NO_TX) == 0) { if ((word & (1 << 31)) != oldbit) { setmosi(spi, word & (1 << 31)); oldbit = word & (1 << 31); @@ -70,7 +70,7 @@ bitbang_txrx_be_cpha0(struct spi_device *spi, /* sample MSB (from slave) on leading edge */ word <<= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) + if ((flags & SPI_CONTROLLER_NO_RX) == 0) word |= getmiso(spi); setsck(spi, cpol); } @@ -90,7 +90,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi, /* setup MSB (to slave) on leading edge */ setsck(spi, !cpol); - if ((flags & SPI_MASTER_NO_TX) == 0) { + if ((flags & SPI_CONTROLLER_NO_TX) == 0) { if ((word & (1 << 31)) != oldbit) { setmosi(spi, word & (1 << 31)); oldbit = word & (1 << 31); @@ -103,7 +103,7 @@ bitbang_txrx_be_cpha1(struct spi_device *spi, /* sample MSB (from slave) on trailing edge */ word <<= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) + if ((flags & SPI_CONTROLLER_NO_RX) == 0) word |= getmiso(spi); } return word; @@ -122,7 +122,7 @@ bitbang_txrx_le_cpha0(struct spi_device *spi, for (; likely(bits); bits--) { /* setup LSB (to slave) on trailing edge */ - if ((flags & SPI_MASTER_NO_TX) == 0) { + if ((flags & SPI_CONTROLLER_NO_TX) == 0) { if ((word & 1) != oldbit) { setmosi(spi, word & 1); oldbit = word & 1; @@ -135,7 +135,7 @@ bitbang_txrx_le_cpha0(struct spi_device *spi, /* sample LSB (from slave) on leading edge */ word >>= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) + if ((flags & SPI_CONTROLLER_NO_RX) == 0) word |= getmiso(spi) << rxbit; setsck(spi, cpol); } @@ -156,7 +156,7 @@ bitbang_txrx_le_cpha1(struct spi_device *spi, /* setup LSB (to slave) on leading edge */ setsck(spi, !cpol); - if ((flags & SPI_MASTER_NO_TX) == 0) { + if ((flags & SPI_CONTROLLER_NO_TX) == 0) { if ((word & 1) != oldbit) { setmosi(spi, word & 1); oldbit = word & 1; @@ -169,7 +169,7 @@ bitbang_txrx_le_cpha1(struct spi_device *spi, /* sample LSB (from slave) on trailing edge */ word >>= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) + if ((flags & SPI_CONTROLLER_NO_RX) == 0) word |= getmiso(spi) << rxbit; } return word; diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 27d0087f8688..862f209cada1 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -248,7 +248,7 @@ static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t) if (spi->mode & SPI_3WIRE) { unsigned flags; - flags = t->tx_buf ? SPI_MASTER_NO_RX : SPI_MASTER_NO_TX; + flags = t->tx_buf ? SPI_CONTROLLER_NO_RX : SPI_CONTROLLER_NO_TX; return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t, flags); } return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t, 0); diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index b04811c911e2..014392459d5e 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -939,7 +939,7 @@ static int davinci_spi_probe(struct platform_device *pdev) master->bus_num = pdev->id; master->num_chipselect = pdata->num_chipselect; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16); - master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_GPIO_SS; + master->flags = SPI_CONTROLLER_MUST_RX | SPI_MASTER_GPIO_SS; master->setup = davinci_spi_setup; master->cleanup = davinci_spi_cleanup; master->can_dma = davinci_spi_can_dma; diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index fb68c72df171..1c907d5d5bb3 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -856,7 +856,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev) controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware; controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware; controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX; + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; controller->dev.of_node = pdev->dev.of_node; controller->bus_num = pdev->id; controller->num_chipselect = fsl_lpspi->num_cs; diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 092afc7679d4..85e149ec2910 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -170,7 +170,7 @@ static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi, /* * These functions do not call setmosi or getmiso if respective flag - * (SPI_MASTER_NO_RX or SPI_MASTER_NO_TX) is set, so they are safe to + * (SPI_CONTROLLER_NO_RX or SPI_CONTROLLER_NO_TX) is set, so they are safe to * call when such pin is not present or defined in the controller. * A separate set of callbacks is defined to get highest possible * speed in the generic case (when both MISO and MOSI lines are @@ -416,11 +416,11 @@ static int spi_gpio_probe(struct platform_device *pdev) if (!spi_gpio->mosi) { /* HW configuration without MOSI pin * - * No setting SPI_MASTER_NO_RX here - if there is only + * No setting SPI_CONTROLLER_NO_RX here - if there is only * a MOSI pin connected the host can still do RX by * changing the direction of the line. */ - master->flags = SPI_MASTER_NO_TX; + master->flags = SPI_CONTROLLER_NO_TX; } master->bus_num = pdev->id; @@ -438,7 +438,7 @@ static int spi_gpio_probe(struct platform_device *pdev) bb->chipselect = spi_gpio_chipselect; bb->set_line_direction = spi_gpio_set_direction; - if (master->flags & SPI_MASTER_NO_TX) { + if (master->flags & SPI_CONTROLLER_NO_TX) { bb->txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0; bb->txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1; bb->txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2; diff --git a/drivers/spi/spi-lp8841-rtc.c b/drivers/spi/spi-lp8841-rtc.c index 2d436541d6c2..ccaa7a946359 100644 --- a/drivers/spi/spi-lp8841-rtc.c +++ b/drivers/spi/spi-lp8841-rtc.c @@ -75,14 +75,14 @@ bitbang_txrx_be_cpha0_lsb(struct spi_lp8841_rtc *data, for (; likely(bits); bits--) { /* setup LSB (to slave) on leading edge */ - if ((flags & SPI_MASTER_NO_TX) == 0) + if ((flags & SPI_CONTROLLER_NO_TX) == 0) setmosi(data, (word & 1)); usleep_range(usecs, usecs + 1); /* T(setup) */ /* sample LSB (from slave) on trailing edge */ word >>= 1; - if ((flags & SPI_MASTER_NO_RX) == 0) + if ((flags & SPI_CONTROLLER_NO_RX) == 0) word |= (getmiso(data) << 31); setsck(data, !cpol); @@ -113,7 +113,7 @@ spi_lp8841_rtc_transfer_one(struct spi_master *master, while (likely(count > 0)) { word = *tx++; bitbang_txrx_be_cpha0_lsb(data, 1, 0, - SPI_MASTER_NO_RX, word, 8); + SPI_CONTROLLER_NO_RX, word, 8); count--; } } else if (rx) { @@ -121,7 +121,7 @@ spi_lp8841_rtc_transfer_one(struct spi_master *master, writeb(data->state, data->iomem); while (likely(count > 0)) { word = bitbang_txrx_be_cpha0_lsb(data, 1, 0, - SPI_MASTER_NO_TX, word, 8); + SPI_CONTROLLER_NO_TX, word, 8); *rx++ = word; count--; } diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 141562c882f1..7a9eba35ac38 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -864,7 +864,7 @@ static int meson_spicc_probe(struct platform_device *pdev) SPI_BPW_MASK(24) | SPI_BPW_MASK(16) | SPI_BPW_MASK(8); - master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX); + master->flags = (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX); master->min_speed_hz = spicc->data->min_speed_hz; master->max_speed_hz = spicc->data->max_speed_hz; master->setup = meson_spicc_setup; diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 39272ad6641b..0757985947dd 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -1142,7 +1142,7 @@ static int mtk_spi_probe(struct platform_device *pdev) master->mode_bits |= SPI_CS_HIGH; if (mdata->dev_comp->must_tx) - master->flags = SPI_MASTER_MUST_TX; + master->flags = SPI_CONTROLLER_MUST_TX; if (mdata->dev_comp->ipm_design) master->mode_bits |= SPI_LOOP | SPI_RX_DUAL | SPI_TX_DUAL | SPI_RX_QUAD | SPI_TX_QUAD; diff --git a/drivers/spi/spi-pci1xxxx.c b/drivers/spi/spi-pci1xxxx.c index 4445d82409d6..d23c42839da1 100644 --- a/drivers/spi/spi-pci1xxxx.c +++ b/drivers/spi/spi-pci1xxxx.c @@ -365,7 +365,7 @@ static int pci1xxxx_spi_probe(struct pci_dev *pdev, const struct pci_device_id * spi_host->bits_per_word_mask = SPI_BPW_MASK(8); spi_host->max_speed_hz = PCI1XXXX_SPI_MAX_CLOCK_HZ; spi_host->min_speed_hz = PCI1XXXX_SPI_MIN_CLOCK_HZ; - spi_host->flags = SPI_MASTER_MUST_TX; + spi_host->flags = SPI_CONTROLLER_MUST_TX; spi_master_set_devdata(spi_host, spi_sub_ptr); ret = devm_spi_register_master(dev, spi_host); if (ret) diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index f2af5e653f3d..e9b4c9cb97fb 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -773,7 +773,7 @@ static int pic32_spi_probe(struct platform_device *pdev) master->max_speed_hz = clk_get_rate(pic32s->clk); master->setup = pic32_spi_setup; master->cleanup = pic32_spi_cleanup; - master->flags = SPI_MASTER_MUST_TX | SPI_MASTER_MUST_RX; + master->flags = SPI_CONTROLLER_MUST_TX | SPI_CONTROLLER_MUST_RX; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16) | SPI_BPW_MASK(32); master->transfer_one = pic32_spi_one_transfer; diff --git a/drivers/spi/spi-rb4xx.c b/drivers/spi/spi-rb4xx.c index 5073736d3d1f..c817889a7797 100644 --- a/drivers/spi/spi-rb4xx.c +++ b/drivers/spi/spi-rb4xx.c @@ -156,7 +156,7 @@ static int rb4xx_spi_probe(struct platform_device *pdev) master->num_chipselect = 3; master->mode_bits = SPI_TX_DUAL; master->bits_per_word_mask = SPI_BPW_MASK(8); - master->flags = SPI_MASTER_MUST_TX; + master->flags = SPI_CONTROLLER_MUST_TX; master->transfer_one = rb4xx_transfer_one; master->set_cs = rb4xx_set_cs; diff --git a/drivers/spi/spi-slave-mt27xx.c b/drivers/spi/spi-slave-mt27xx.c index 4e4d426bfb43..6d6772974783 100644 --- a/drivers/spi/spi-slave-mt27xx.c +++ b/drivers/spi/spi-slave-mt27xx.c @@ -414,7 +414,7 @@ static int mtk_spi_slave_probe(struct platform_device *pdev) mdata->dev_comp = of_id->data; if (mdata->dev_comp->must_rx) - ctlr->flags = SPI_MASTER_MUST_RX; + ctlr->flags = SPI_CONTROLLER_MUST_RX; platform_set_drvdata(pdev, ctlr); diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 6d10fa4ab783..423212bd0675 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1750,7 +1750,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = { .baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN, .baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX, .has_fifo = false, - .flags = SPI_MASTER_MUST_TX, + .flags = SPI_CONTROLLER_MUST_TX, }; static const struct stm32_spi_cfg stm32h7_spi_cfg = { diff --git a/drivers/spi/spi-xtensa-xtfpga.c b/drivers/spi/spi-xtensa-xtfpga.c index 24dc845b940e..dbd85d7a1526 100644 --- a/drivers/spi/spi-xtensa-xtfpga.c +++ b/drivers/spi/spi-xtensa-xtfpga.c @@ -87,7 +87,7 @@ static int xtfpga_spi_probe(struct platform_device *pdev) if (!master) return -ENOMEM; - master->flags = SPI_MASTER_NO_RX; + master->flags = SPI_CONTROLLER_NO_RX; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); master->bus_num = pdev->dev.id; master->dev.of_node = pdev->dev.of_node; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 32c94eae8926..44ba6798046c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -1623,10 +1623,6 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer) #define spi_master spi_controller #define SPI_MASTER_HALF_DUPLEX SPI_CONTROLLER_HALF_DUPLEX -#define SPI_MASTER_NO_RX SPI_CONTROLLER_NO_RX -#define SPI_MASTER_NO_TX SPI_CONTROLLER_NO_TX -#define SPI_MASTER_MUST_RX SPI_CONTROLLER_MUST_RX -#define SPI_MASTER_MUST_TX SPI_CONTROLLER_MUST_TX #define spi_master_get_devdata(_ctlr) spi_controller_get_devdata(_ctlr) #define spi_master_set_devdata(_ctlr, _data) \
Convert the users to SPI_CONTROLLER_NO_?X and SPI_CONTROLLER_MUST_.X and kill the not used anymore definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/spi/spi-at91-usart.c | 2 +- drivers/spi/spi-atmel.c | 2 +- drivers/spi/spi-bitbang-txrx.h | 16 ++++++++-------- drivers/spi/spi-bitbang.c | 2 +- drivers/spi/spi-davinci.c | 2 +- drivers/spi/spi-fsl-lpspi.c | 2 +- drivers/spi/spi-gpio.c | 8 ++++---- drivers/spi/spi-lp8841-rtc.c | 8 ++++---- drivers/spi/spi-meson-spicc.c | 2 +- drivers/spi/spi-mt65xx.c | 2 +- drivers/spi/spi-pci1xxxx.c | 2 +- drivers/spi/spi-pic32.c | 2 +- drivers/spi/spi-rb4xx.c | 2 +- drivers/spi/spi-slave-mt27xx.c | 2 +- drivers/spi/spi-stm32.c | 2 +- drivers/spi/spi-xtensa-xtfpga.c | 2 +- include/linux/spi/spi.h | 4 ---- 17 files changed, 29 insertions(+), 33 deletions(-)