diff mbox series

[v2,15/15] spi: Fix spelling typos and acronyms capitalization

Message ID 20230710154932.68377-16-andriy.shevchenko@linux.intel.com (mailing list archive)
State Superseded
Headers show
Series spi: Header and core clean up and refactoring | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Andy Shevchenko July 10, 2023, 3:49 p.m. UTC
Fix
  - spelling typos
  - capitalization of acronyms
in the comments.

While at it, fix the multi-line comment style.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi.c          |  54 ++++++++-------
 include/linux/spi/spi.h    | 137 ++++++++++++++++++++-----------------
 include/trace/events/spi.h |   2 +-
 3 files changed, 104 insertions(+), 89 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index bcabae98cb7c..43f7c9b18676 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -682,7 +682,7 @@  static int __spi_add_device(struct spi_device *spi)
  * @spi: spi_device to register
  *
  * Companion function to spi_alloc_device.  Devices allocated with
- * spi_alloc_device can be added onto the spi bus with this function.
+ * spi_alloc_device can be added onto the SPI bus with this function.
  *
  * Return: 0 on success; negative errno on failure
  */
@@ -878,7 +878,7 @@  int spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * spi_res_alloc - allocate a spi resource that is life-cycle managed
  *                 during the processing of a spi_message while using
  *                 spi_transfer_one
- * @spi:     the spi device for which we allocate memory
+ * @spi:     the SPI device for which we allocate memory
  * @release: the release code to execute for this resource
  * @size:    size to alloc and return
  * @gfp:     GFP allocation flags
@@ -904,7 +904,7 @@  static void *spi_res_alloc(struct spi_device *spi, spi_res_release_t release,
 }
 
 /**
- * spi_res_free - free an spi resource
+ * spi_res_free - free an SPI resource
  * @res: pointer to the custom data of a resource
  */
 static void spi_res_free(void *res)
@@ -920,7 +920,7 @@  static void spi_res_free(void *res)
 
 /**
  * spi_res_add - add a spi_res to the spi_message
- * @message: the spi message
+ * @message: the SPI message
  * @res:     the spi_resource
  */
 static void spi_res_add(struct spi_message *message, void *res)
@@ -932,7 +932,7 @@  static void spi_res_add(struct spi_message *message, void *res)
 }
 
 /**
- * spi_res_release - release all spi resources for this message
+ * spi_res_release - release all SPI resources for this message
  * @ctlr:  the @spi_controller
  * @message: the @spi_message
  */
@@ -1392,7 +1392,7 @@  int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer)
 			return -EINVAL;
 		/*
 		 * If there is unknown effective speed, approximate it
-		 * by underestimating with half of the requested hz.
+		 * by underestimating with half of the requested Hz.
 		 */
 		hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2;
 		if (!hz)
@@ -1707,11 +1707,11 @@  static int __spi_pump_transfer_message(struct spi_controller *ctlr,
 }
 
 /**
- * __spi_pump_messages - function which processes spi message queue
+ * __spi_pump_messages - function which processes SPI message queue
  * @ctlr: controller to process queue for
  * @in_kthread: true if we are in the context of the message pump thread
  *
- * This function checks if there is any spi message in the queue that
+ * This function checks if there is any SPI message in the queue that
  * needs processing and if so call out to the driver to initialize hardware
  * and transfer each message.
  *
@@ -1726,7 +1726,7 @@  static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
 	unsigned long flags;
 	int ret;
 
-	/* Take the IO mutex */
+	/* Take the I/O mutex */
 	mutex_lock(&ctlr->io_mutex);
 
 	/* Lock queue */
@@ -2137,8 +2137,8 @@  static int __spi_queued_transfer(struct spi_device *spi,
 
 /**
  * spi_queued_transfer - transfer function for queued transfers
- * @spi: spi device which is requesting transfer
- * @msg: spi message which is to handled is queued to driver queue
+ * @spi: SPI device which is requesting transfer
+ * @msg: SPI message which is to handled is queued to driver queue
  *
  * Return: zero on success, else a negative error code.
  */
@@ -2464,7 +2464,7 @@  static int acpi_spi_count(struct acpi_resource *ares, void *data)
  * acpi_spi_count_resources - Count the number of SpiSerialBus resources
  * @adev:	ACPI device
  *
- * Returns the number of SpiSerialBus resources in the ACPI-device's
+ * Return: the number of SpiSerialBus resources in the ACPI-device's
  * resource-list; or a negative error code.
  */
 int acpi_spi_count_resources(struct acpi_device *adev)
@@ -2598,10 +2598,10 @@  static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
  * @adev: ACPI Device for the spi device
  * @index: Index of the spi resource inside the ACPI Node
  *
- * This should be used to allocate a new spi device from and ACPI Node.
- * The caller is responsible for calling spi_add_device to register the spi device.
+ * This should be used to allocate a new SPI device from and ACPI Device node.
+ * The caller is responsible for calling spi_add_device to register the SPI device.
  *
- * If ctlr is set to NULL, the Controller for the spi device will be looked up
+ * If ctlr is set to NULL, the Controller for the SPI device will be looked up
  * using the resource.
  * If index is set to -1, index is not used.
  * Note: If index is -1, ctlr must be set.
@@ -3299,7 +3299,8 @@  void spi_unregister_controller(struct spi_controller *ctlr)
 	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
 		mutex_unlock(&ctlr->add_lock);
 
-	/* Release the last reference on the controller if its driver
+	/*
+	 * Release the last reference on the controller if its driver
 	 * has not yet been converted to devm_spi_alloc_master/slave().
 	 */
 	if (!ctlr->devm_allocated)
@@ -3512,7 +3513,7 @@  static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
 
 	/* All the others need rx_buf/tx_buf also set */
 	for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
-		/* Update rx_buf, tx_buf and dma */
+		/* Update rx_buf, tx_buf and DMA */
 		if (xfers[i].rx_buf)
 			xfers[i].rx_buf += offset;
 		if (xfers[i].rx_dma)
@@ -3582,7 +3583,7 @@  EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
 
 
 /**
- * spi_split_transfers_maxwords - split spi transfers into multiple transfers
+ * spi_split_transfers_maxwords - split SPI transfers into multiple transfers
  *                                when an individual transfer exceeds a
  *                                certain number of SPI words
  * @ctlr:     the @spi_controller for this transfer
@@ -3625,7 +3626,8 @@  EXPORT_SYMBOL_GPL(spi_split_transfers_maxwords);
 
 /*-------------------------------------------------------------------------*/
 
-/* Core methods for SPI controller protocol drivers.  Some of the
+/*
+ * Core methods for SPI controller protocol drivers. Some of the
  * other core methods are currently defined as inline functions.
  */
 
@@ -3685,7 +3687,7 @@  static int spi_set_cs_timing(struct spi_device *spi)
  * changes those settings, and must be called from a context that can sleep.
  * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
  * effect the next time the device is selected and data is transferred to
- * or from it.  When this function returns, the spi device is deselected.
+ * or from it.  When this function returns, the SPI device is deselected.
  *
  * Note that this call will fail if the protocol driver specifies an option
  * that the underlying controller or its driver does not support.  For
@@ -4025,7 +4027,7 @@  static int __spi_async(struct spi_device *spi, struct spi_message *message)
  * spi_async - asynchronous SPI transfer
  * @spi: device with which data will be exchanged
  * @message: describes the data transfers, including completion callback
- * Context: any (irqs may be blocked, etc)
+ * Context: any (IRQs may be blocked, etc)
  *
  * This call may be used in_irq and other contexts which can't sleep,
  * as well as from task contexts which can sleep.
@@ -4079,7 +4081,7 @@  EXPORT_SYMBOL_GPL(spi_async);
  * spi_async_locked - version of spi_async with exclusive bus usage
  * @spi: device with which data will be exchanged
  * @message: describes the data transfers, including completion callback
- * Context: any (irqs may be blocked, etc)
+ * Context: any (IRQs may be blocked, etc)
  *
  * This call may be used in_irq and other contexts which can't sleep,
  * as well as from task contexts which can sleep.
@@ -4342,9 +4344,9 @@  static u8	*buf;
 /**
  * spi_write_then_read - SPI synchronous write followed by read
  * @spi: device with which data will be exchanged
- * @txbuf: data to be written (need not be dma-safe)
+ * @txbuf: data to be written (need not be DMA-safe)
  * @n_tx: size of txbuf, in bytes
- * @rxbuf: buffer into which data will be read (need not be dma-safe)
+ * @rxbuf: buffer into which data will be read (need not be DMA-safe)
  * @n_rx: size of rxbuf, in bytes
  * Context: can sleep
  *
@@ -4355,7 +4357,7 @@  static u8	*buf;
  *
  * Parameters to this routine are always copied using a small buffer.
  * Performance-sensitive or bulk transfer code should instead use
- * spi_{async,sync}() calls with dma-safe buffers.
+ * spi_{async,sync}() calls with DMA-safe buffers.
  *
  * Return: zero on success, else a negative error code.
  */
@@ -4400,7 +4402,7 @@  int spi_write_then_read(struct spi_device *spi,
 	x[0].tx_buf = local_buf;
 	x[1].rx_buf = local_buf + n_tx;
 
-	/* Do the i/o */
+	/* Do the I/O */
 	status = spi_sync(spi, &message);
 	if (status == 0)
 		memcpy(rxbuf, x[1].rx_buf, n_rx);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 43f6c3f71a76..e40ebffbf4ea 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -52,7 +52,7 @@  extern struct bus_type spi_bus_type;
 
 /**
  * struct spi_statistics - statistics for spi transfers
- * @syncp:         seqcount to protect members in this struct for per-cpu udate
+ * @syncp:         seqcount to protect members in this struct for per-cpu update
  *                 on 32-bit systems
  *
  * @messages:      number of spi-messages handled
@@ -71,7 +71,7 @@  extern struct bus_type spi_bus_type;
  * @bytes_rx:      number of bytes received from device
  *
  * @transfer_bytes_histo:
- *                 transfer bytes histogramm
+ *                 transfer bytes histogram
  *
  * @transfers_split_maxsize:
  *                 number of transfers that have been split because of
@@ -172,7 +172,7 @@  extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg,
  *	the device will bind to the named driver and only the named driver.
  *	Do not set directly, because core frees it; use driver_set_override() to
  *	set or clear it.
- * @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when
+ * @cs_gpiod: GPIO descriptor of the chipselect line (optional, NULL when
  *	not using a GPIO line)
  * @word_delay: delay to be inserted between consecutive
  *	words of a transfer
@@ -228,7 +228,7 @@  struct spi_device {
 	void			*controller_data;
 	char			modalias[SPI_NAME_SIZE];
 	const char		*driver_override;
-	struct gpio_desc	*cs_gpiod;	/* Chip select gpio desc */
+	struct gpio_desc	*cs_gpiod;	/* Chip select GPIO descriptor */
 	struct spi_delay	word_delay; /* Inter-word delay */
 	/* CS delays */
 	struct spi_delay	cs_setup;
@@ -239,7 +239,7 @@  struct spi_device {
 	struct spi_statistics __percpu	*pcpu_statistics;
 
 	/*
-	 * likely need more hooks for more protocol options affecting how
+	 * Likely need more hooks for more protocol options affecting how
 	 * the controller talks to each chip, like:
 	 *  - memory packing (12 bit samples into low bits, others zeroed)
 	 *  - priority
@@ -315,11 +315,11 @@  static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_d
 /**
  * struct spi_driver - Host side "protocol" driver
  * @id_table: List of SPI devices supported by this driver
- * @probe: Binds this driver to the spi device.  Drivers can verify
+ * @probe: Binds this driver to the SPI device.  Drivers can verify
  *	that the device is actually present, and may need to configure
  *	characteristics (such as bits_per_word) which weren't needed for
  *	the initial configuration done during system setup.
- * @remove: Unbinds this driver from the spi device
+ * @remove: Unbinds this driver from the SPI device
  * @shutdown: Standard shutdown callback used during system state
  *	transitions such as powerdown/halt and kexec
  * @driver: SPI device drivers should initialize the name and owner
@@ -431,7 +431,7 @@  extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @queued: whether this controller is providing an internal message queue
  * @kworker: pointer to thread struct for message pump
  * @pump_messages: work struct for scheduling work to the message pump
- * @queue_lock: spinlock to syncronise access to message queue
+ * @queue_lock: spinlock to synchronise access to message queue
  * @queue: message queue
  * @cur_msg: the currently in-flight message
  * @cur_msg_completion: a completion for the current in-flight message
@@ -489,7 +489,7 @@  extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
  * @target_abort: abort the ongoing transfer request on an SPI target controller
- * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS
+ * @cs_gpiods: Array of GPIO descriptors to use as chip select lines; one per CS
  *	number. Any individual value may be NULL for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
  * @use_gpio_descriptors: Turns on the code in the SPI core to parse and grab
@@ -516,7 +516,7 @@  extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  *	If the driver does not set this, the SPI core takes the snapshot as
  *	close to the driver hand-over as possible.
  * @irq_flags: Interrupt enable state during PTP system timestamping
- * @fallback: fallback to pio if dma transfer return failure with
+ * @fallback: fallback to PIO if DMA transfer return failure with
  *	SPI_TRANS_FAIL_NO_START.
  * @queue_empty: signal green light for opportunistically skipping the queue
  *	for spi_sync transfers.
@@ -538,15 +538,17 @@  struct spi_controller {
 
 	struct list_head list;
 
-	/* Other than negative (== assign one dynamically), bus_num is fully
-	 * board-specific.  usually that simplifies to being SOC-specific.
-	 * example:  one SOC has three SPI controllers, numbered 0..2,
-	 * and one board's schematics might show it using SPI-2.  software
+	/*
+	 * Other than negative (== assign one dynamically), bus_num is fully
+	 * board-specific. Usually that simplifies to being SoC-specific.
+	 * example: one SoC has three SPI controllers, numbered 0..2,
+	 * and one board's schematics might show it using SPI-2. Software
 	 * would normally use bus_num=2 for that controller.
 	 */
 	s16			bus_num;
 
-	/* chipselects will be integral to many controllers; some others
+	/*
+	 * Chipselects will be integral to many controllers; some others
 	 * might use board-specific GPIOs.
 	 */
 	u16			num_chipselect;
@@ -591,8 +593,8 @@  struct spi_controller {
 	};
 
 	/*
-	 * on some hardware transfer / message size may be constrained
-	 * the limit may depend on device transfer settings
+	 * On some hardware transfer / message size may be constrained
+	 * the limit may depend on device transfer settings.
 	 */
 	size_t (*max_transfer_size)(struct spi_device *spi);
 	size_t (*max_message_size)(struct spi_device *spi);
@@ -610,7 +612,8 @@  struct spi_controller {
 	/* Flag indicating that the SPI bus is locked for exclusive use */
 	bool			bus_lock_flag;
 
-	/* Setup mode and clock, etc (spi driver may call many times).
+	/*
+	 * Setup mode and clock, etc (SPI driver may call many times).
 	 *
 	 * IMPORTANT:  this may be called when transfers to another
 	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
@@ -628,18 +631,19 @@  struct spi_controller {
 	 */
 	int (*set_cs_timing)(struct spi_device *spi);
 
-	/* Bidirectional bulk transfers
+	/*
+	 * Bidirectional bulk transfers
 	 *
 	 * + The transfer() method may not sleep; its main role is
 	 *   just to add the message to the queue.
 	 * + For now there's no remove-from-queue operation, or
 	 *   any other request management
-	 * + To a given spi_device, message queueing is pure fifo
+	 * + To a given spi_device, message queueing is pure FIFO
 	 *
 	 * + The controller's main job is to process its message queue,
 	 *   selecting a chip (for masters), then transferring data
 	 * + If there are multiple spi_device children, the i/o queue
-	 *   arbitration algorithm is unspecified (round robin, fifo,
+	 *   arbitration algorithm is unspecified (round robin, FIFO,
 	 *   priority, reservations, preemption, etc)
 	 *
 	 * + Chipselect stays active during the entire message
@@ -720,7 +724,7 @@  struct spi_controller {
 	const struct spi_controller_mem_ops *mem_ops;
 	const struct spi_controller_mem_caps *mem_caps;
 
-	/* gpio chip select */
+	/* GPIO chip select */
 	struct gpio_desc	**cs_gpiods;
 	bool			use_gpio_descriptors;
 	s8			unused_native_cs;
@@ -804,7 +808,7 @@  void spi_take_timestamp_post(struct spi_controller *ctlr,
 			     struct spi_transfer *xfer,
 			     size_t progress, bool irqs_off);
 
-/* The spi driver core manages memory for the spi_controller classdev */
+/* The SPI driver core manages memory for the spi_controller classdev */
 extern struct spi_controller *__spi_alloc_controller(struct device *host,
 						unsigned int size, bool slave);
 
@@ -893,13 +897,13 @@  typedef void (*spi_res_release_t)(struct spi_controller *ctlr,
 				  void *res);
 
 /**
- * struct spi_res - spi resource management structure
+ * struct spi_res - SPI resource management structure
  * @entry:   list entry
  * @release: release code called prior to freeing this resource
  * @data:    extra data allocated for the specific use-case
  *
- * this is based on ideas from devres, but focused on life-cycle
- * management during spi_message processing
+ * This is based on ideas from devres, but focused on life-cycle
+ * management during spi_message processing.
  */
 struct spi_res {
 	struct list_head        entry;
@@ -917,7 +921,7 @@  struct spi_res {
  *
  * The spi_messages themselves consist of a series of read+write transfer
  * segments.  Those segments always read the same number of bits as they
- * write; but one or the other is easily ignored by passing a null buffer
+ * write; but one or the other is easily ignored by passing a NULL buffer
  * pointer.  (This is unlike most types of I/O API, because SPI hardware
  * is full duplex.)
  *
@@ -928,8 +932,8 @@  struct spi_res {
 
 /**
  * struct spi_transfer - a read/write buffer pair
- * @tx_buf: data to be written (dma-safe memory), or NULL
- * @rx_buf: data to be read (dma-safe memory), or NULL
+ * @tx_buf: data to be written (DMA-safe memory), or NULL
+ * @rx_buf: data to be read (DMA-safe memory), or NULL
  * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
  * @tx_nbits: number of bits used for writing. If 0 the default
@@ -952,7 +956,7 @@  struct spi_res {
  * @word_delay: inter word delay to be introduced after each word size
  *	(set by bits_per_word) transmission.
  * @effective_speed_hz: the effective SCK-speed that was used to
- *      transfer this transfer. Set to 0 if the spi bus driver does
+ *      transfer this transfer. Set to 0 if the SPI bus driver does
  *      not support it.
  * @transfer_list: transfers are sequenced through @spi_message.transfers
  * @tx_sg: Scatterlist for transmit, currently not for client use
@@ -981,16 +985,16 @@  struct spi_res {
  *	transmitting the "pre" word, and the "post" timestamp after receiving
  *	transmit confirmation from the controller for the "post" word.
  * @timestamped: true if the transfer has been timestamped
- * @error: Error status logged by spi controller driver.
+ * @error: Error status logged by SPI controller driver.
  *
  * SPI transfers always write the same number of bytes as they read.
  * Protocol drivers should always provide @rx_buf and/or @tx_buf.
  * In some cases, they may also want to provide DMA addresses for
  * the data being transferred; that may reduce overhead, when the
- * underlying driver uses dma.
+ * underlying driver uses DMA.
  *
- * If the transmit buffer is null, zeroes will be shifted out
- * while filling @rx_buf.  If the receive buffer is null, the data
+ * If the transmit buffer is NULL, zeroes will be shifted out
+ * while filling @rx_buf.  If the receive buffer is NULL, the data
  * shifted in will be discarded.  Only "len" bytes shift out (or in).
  * It's an error to try to shift out a partial word.  (For example, by
  * shifting out three bytes with word size of sixteen or twenty bits;
@@ -1024,7 +1028,7 @@  struct spi_res {
  * Some devices need protocol transactions to be built from a series of
  * spi_message submissions, where the content of one message is determined
  * by the results of previous messages and where the whole transaction
- * ends when the chipselect goes intactive.
+ * ends when the chipselect goes inactive.
  *
  * When SPI can transfer in 1x,2x or 4x. It can get this transfer information
  * from device through @tx_nbits and @rx_nbits. In Bi-direction, these
@@ -1038,10 +1042,11 @@  struct spi_res {
  * and its transfers, ignore them until its completion callback.
  */
 struct spi_transfer {
-	/* It's ok if tx_buf == rx_buf (right?)
-	 * for MicroWire, one buffer must be null
-	 * buffers must work with dma_*map_single() calls, unless
-	 *   spi_message.is_dma_mapped reports a pre-existing mapping
+	/*
+	 * It's okay if tx_buf == rx_buf (right?).
+	 * For MicroWire, one buffer must be NULL.
+	 * Buffers must work with dma_*map_single() calls, unless
+	 * spi_message.is_dma_mapped reports a pre-existing mapping.
 	 */
 	const void	*tx_buf;
 	void		*rx_buf;
@@ -1061,9 +1066,9 @@  struct spi_transfer {
 	unsigned	tx_nbits:3;
 	unsigned	rx_nbits:3;
 	unsigned	timestamped:1;
-#define	SPI_NBITS_SINGLE	0x01 /* 1bit transfer */
-#define	SPI_NBITS_DUAL		0x02 /* 2bits transfer */
-#define	SPI_NBITS_QUAD		0x04 /* 4bits transfer */
+#define	SPI_NBITS_SINGLE	0x01 /* 1-bit transfer */
+#define	SPI_NBITS_DUAL		0x02 /* 2-bit transfer */
+#define	SPI_NBITS_QUAD		0x04 /* 4-bit transfer */
 	u8		bits_per_word;
 	struct spi_delay	delay;
 	struct spi_delay	cs_change_delay;
@@ -1084,7 +1089,7 @@  struct spi_transfer {
  * struct spi_message - one multi-segment SPI transaction
  * @transfers: list of transfer segments in this transaction
  * @spi: SPI device to which the transaction is queued
- * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
+ * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual
  *	addresses for each transfer buffer
  * @complete: called to report transaction completions
  * @context: the argument to complete() when it's called
@@ -1094,7 +1099,7 @@  struct spi_transfer {
  * @status: zero for success, else negative errno
  * @queue: for use by whichever driver currently owns the message
  * @state: for use by whichever driver currently owns the message
- * @resources: for resource management when the spi message is processed
+ * @resources: for resource management when the SPI message is processed
  * @prepared: spi_prepare_message was called for the this message
  * @t: for use with spi_message_alloc() when message and transfers have
  *	been allocated together
@@ -1123,7 +1128,8 @@  struct spi_message {
 	/* spi_prepare_message() was called for this message */
 	bool			prepared;
 
-	/* REVISIT:  we might want a flag affecting the behavior of the
+	/*
+	 * REVISIT: we might want a flag affecting the behavior of the
 	 * last transfer ... allowing things like "read 16 bit length L"
 	 * immediately followed by "read L bytes".  Basically imposing
 	 * a specific message scheduling algorithm.
@@ -1141,14 +1147,15 @@  struct spi_message {
 	unsigned		frame_length;
 	unsigned		actual_length;
 
-	/* For optional use by whatever driver currently owns the
+	/*
+	 * For optional use by whatever driver currently owns the
 	 * spi_message ...  between calls to spi_async and then later
 	 * complete(), that's the spi_controller controller driver.
 	 */
 	struct list_head	queue;
 	void			*state;
 
-	/* List of spi_res reources when the spi message is processed */
+	/* List of spi_res resources when the SPI message is processed */
 	struct list_head        resources;
 
 	/* For embedding transfers into the memory of the message */
@@ -1188,7 +1195,7 @@  spi_transfer_delay_exec(struct spi_transfer *t)
 /**
  * spi_message_init_with_transfers - Initialize spi_message and append transfers
  * @m: spi_message to be initialized
- * @xfers: An array of spi transfers
+ * @xfers: An array of SPI transfers
  * @num_xfers: Number of items in the xfer array
  *
  * This function initializes the given spi_message and adds each spi_transfer in
@@ -1205,10 +1212,10 @@  struct spi_transfer *xfers, unsigned int num_xfers)
 		spi_message_add_tail(&xfers[i], m);
 }
 
-/* It's fine to embed message and transaction structures in other data
+/*
+ * It's fine to embed message and transaction structures in other data
  * structures so long as you don't free them while they're in use.
  */
-
 static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags)
 {
 	struct spi_message *m;
@@ -1312,7 +1319,7 @@  typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr,
  *                                 replacements that have occurred
  *                                 so that they can get reverted
  * @release:            some extra release code to get executed prior to
- *                      relasing this structure
+ *                      releasing this structure
  * @extradata:          pointer to some extra data if requested or NULL
  * @replaced_transfers: transfers that have been replaced and which need
  *                      to get restored
@@ -1322,9 +1329,9 @@  typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr,
  * @inserted_transfers: array of spi_transfers of array-size @inserted,
  *                      that have been replacing replaced_transfers
  *
- * note: that @extradata will point to @inserted_transfers[@inserted]
+ * Note: that @extradata will point to @inserted_transfers[@inserted]
  * if some extra allocation is requested, so alignment will be the same
- * as for spi_transfers
+ * as for spi_transfers.
  */
 struct spi_replaced_transfers {
 	spi_replaced_release_t release;
@@ -1350,7 +1357,8 @@  extern int spi_split_transfers_maxwords(struct spi_controller *ctlr,
 
 /*---------------------------------------------------------------------------*/
 
-/* All these synchronous SPI transfer routines are utilities layered
+/*
+ * All these synchronous SPI transfer routines are utilities layered
  * over the core async transfer primitive.  Here, "synchronous" means
  * they will sleep uninterruptibly until the async transfer completes.
  */
@@ -1493,7 +1501,7 @@  static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd)
  *
  * Callable only from contexts that can sleep.
  *
- * Return: the (unsigned) sixteen bit number returned by the device in cpu
+ * Return: the (unsigned) sixteen bit number returned by the device in CPU
  * endianness, or else a negative error code.
  */
 static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
@@ -1521,7 +1529,7 @@  static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * As a rule, SPI devices can't be probed.  Instead, board init code
  * provides a table listing the devices which are present, with enough
  * information to bind and set up the device's driver.  There's basic
- * support for nonstatic configurations too; enough to handle adding
+ * support for non-static configurations too; enough to handle adding
  * parport adapters, or microcontrollers acting as USB-to-SPI bridges.
  */
 
@@ -1558,12 +1566,13 @@  static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
  * are active in some dynamic board configuration models.
  */
 struct spi_board_info {
-	/* The device name and module name are coupled, like platform_bus;
+	/*
+	 * The device name and module name are coupled, like platform_bus;
 	 * "modalias" is normally the driver name.
 	 *
 	 * platform_data goes to spi_device.dev.platform_data,
 	 * controller_data goes to spi_device.controller_data,
-	 * irq is copied too
+	 * IRQ is copied too.
 	 */
 	char		modalias[SPI_NAME_SIZE];
 	const void	*platform_data;
@@ -1575,7 +1584,8 @@  struct spi_board_info {
 	u32		max_speed_hz;
 
 
-	/* bus_num is board specific and matches the bus_num of some
+	/*
+	 * bus_num is board specific and matches the bus_num of some
 	 * spi_controller that will probably be registered later.
 	 *
 	 * chip_select reflects how this chip is wired to that master;
@@ -1584,12 +1594,14 @@  struct spi_board_info {
 	u16		bus_num;
 	u16		chip_select;
 
-	/* mode becomes spi_device.mode, and is essential for chips
+	/*
+	 * mode becomes spi_device.mode, and is essential for chips
 	 * where the default of SPI_CS_HIGH = 0 is wrong.
 	 */
 	u32		mode;
 
-	/* ... may need additional spi_device chip config data here.
+	/*
+	 * ... may need additional spi_device chip config data here.
 	 * avoid stuff protocol drivers can set; but include stuff
 	 * needed to behave without being bound to a driver:
 	 *  - quirks like clock rate mattering when not selected
@@ -1606,7 +1618,8 @@  spi_register_board_info(struct spi_board_info const *info, unsigned n)
 	{ return 0; }
 #endif
 
-/* If you're hotplugging an adapter with devices (parport, usb, etc)
+/*
+ * If you're hotplugging an adapter with devices (parport, USB, etc)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_controller().
diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h
index c0248a8fa79c..e63d4a24d879 100644
--- a/include/trace/events/spi.h
+++ b/include/trace/events/spi.h
@@ -167,7 +167,7 @@  TRACE_EVENT(spi_message_done,
 );
 
 /*
- * consider a buffer valid if non-NULL and if it doesn't match the dummy buffer
+ * Consider a buffer valid if non-NULL and if it doesn't match the dummy buffer
  * that only exist to work with controllers that have SPI_CONTROLLER_MUST_TX or
  * SPI_CONTROLLER_MUST_RX.
  */