@@ -85,6 +85,7 @@ TEST_GEN_FILES += bind_wildcard
TEST_PROGS += test_vxlan_mdb.sh
TEST_PROGS += test_bridge_neigh_suppress.sh
TEST_PROGS += test_vxlan_nolocalbypass.sh
+TEST_PROGS += test_bridge_backup_port.sh
TEST_FILES := settings
new file mode 100755
@@ -0,0 +1,759 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking bridge backup port and backup nexthop ID
+# functionality. The topology consists of two bridge (VTEPs) connected using
+# VXLAN. The test checks that when the switch port (swp1) is down, traffic is
+# redirected to the VXLAN port (vx0). When a backup nexthop ID is configured,
+# the test checks that traffic is redirected with the correct nexthop
+# information.
+#
+# +------------------------------------+ +------------------------------------+
+# | + swp1 + vx0 | | + swp1 + vx0 |
+# | | | | | | | |
+# | | br0 | | | | | |
+# | +------------+-----------+ | | +------------+-----------+ |
+# | | | | | |
+# | | | | | |
+# | + | | + |
+# | br0 | | br0 |
+# | + | | + |
+# | | | | | |
+# | | | | | |
+# | + | | + |
+# | br0.10 | | br0.10 |
+# | 192.0.2.65/28 | | 192.0.2.66/28 |
+# | | | |
+# | | | |
+# | 192.0.2.33 | | 192.0.2.34 |
+# | + lo | | + lo |
+# | | | |
+# | | | |
+# | 192.0.2.49/28 | | 192.0.2.50/28 |
+# | veth0 +-------+ veth0 |
+# | | | |
+# | sw1 | | sw2 |
+# +------------------------------------+ +------------------------------------+
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# All tests in this script. Can be overridden with -t option.
+TESTS="
+ backup_port
+ backup_nhid
+ backup_nhid_invalid
+ backup_nhid_ping
+ backup_nhid_torture
+"
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+PING_TIMEOUT=5
+
+################################################################################
+# Utilities
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ printf "TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "$VERBOSE" = "1" ]; then
+ echo " rc=$rc, expected $expected"
+ fi
+
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+
+ if [ "${PAUSE}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+}
+
+run_cmd()
+{
+ local cmd="$1"
+ local out
+ local stderr="2>/dev/null"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf "COMMAND: $cmd\n"
+ stderr=
+ fi
+
+ out=$(eval $cmd $stderr)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ return $rc
+}
+
+tc_check_packets()
+{
+ local ns=$1; shift
+ local id=$1; shift
+ local handle=$1; shift
+ local count=$1; shift
+ local pkts
+
+ sleep 0.1
+ pkts=$(tc -n $ns -j -s filter show $id \
+ | jq ".[] | select(.options.handle == $handle) | \
+ .options.actions[0].stats.packets")
+ [[ $pkts == $count ]]
+}
+
+################################################################################
+# Setup
+
+setup_topo_ns()
+{
+ local ns=$1; shift
+
+ ip netns add $ns
+ ip -n $ns link set dev lo up
+
+ ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
+ ip netns exec $ns sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+setup_topo()
+{
+ local ns
+
+ for ns in sw1 sw2; do
+ setup_topo_ns $ns
+ done
+
+ ip link add name veth0 type veth peer name veth1
+ ip link set dev veth0 netns sw1 name veth0
+ ip link set dev veth1 netns sw2 name veth0
+}
+
+setup_sw_common()
+{
+ local ns=$1; shift
+ local local_addr=$1; shift
+ local remote_addr=$1; shift
+ local veth_addr=$1; shift
+ local gw_addr=$1; shift
+ local br_addr=$1; shift
+
+ ip -n $ns address add $local_addr/32 dev lo
+
+ ip -n $ns link set dev veth0 up
+ ip -n $ns address add $veth_addr/28 dev veth0
+ ip -n $ns route add default via $gw_addr
+
+ ip -n $ns link add name br0 up type bridge vlan_filtering 1 \
+ vlan_default_pvid 0 mcast_snooping 0
+
+ ip -n $ns link add link br0 name br0.10 up type vlan id 10
+ bridge -n $ns vlan add vid 10 dev br0 self
+ ip -n $ns address add $br_addr/28 dev br0.10
+
+ ip -n $ns link add name swp1 up type dummy
+ ip -n $ns link set dev swp1 master br0
+ bridge -n $ns vlan add vid 10 dev swp1 untagged
+
+ ip -n $ns link add name vx0 up master br0 type vxlan \
+ local $local_addr dstport 4789 nolearning external
+ bridge -n $ns link set dev vx0 vlan_tunnel on learning off
+
+ bridge -n $ns vlan add vid 10 dev vx0
+ bridge -n $ns vlan add vid 10 dev vx0 tunnel_info id 10010
+}
+
+setup_sw1()
+{
+ local ns=sw1
+ local local_addr=192.0.2.33
+ local remote_addr=192.0.2.34
+ local veth_addr=192.0.2.49
+ local gw_addr=192.0.2.50
+ local br_addr=192.0.2.65
+
+ setup_sw_common $ns $local_addr $remote_addr $veth_addr $gw_addr \
+ $br_addr
+}
+
+setup_sw2()
+{
+ local ns=sw2
+ local local_addr=192.0.2.34
+ local remote_addr=192.0.2.33
+ local veth_addr=192.0.2.50
+ local gw_addr=192.0.2.49
+ local br_addr=192.0.2.66
+
+ setup_sw_common $ns $local_addr $remote_addr $veth_addr $gw_addr \
+ $br_addr
+}
+
+setup()
+{
+ set -e
+
+ setup_topo
+ setup_sw1
+ setup_sw2
+
+ sleep 5
+
+ set +e
+}
+
+cleanup()
+{
+ local ns
+
+ for ns in h1 h2 sw1 sw2; do
+ ip netns del $ns &> /dev/null
+ done
+}
+
+################################################################################
+# Tests
+
+backup_port()
+{
+ local dmac=00:11:22:33:44:55
+ local smac=00:aa:bb:cc:dd:ee
+
+ echo
+ echo "Backup port"
+ echo "-----------"
+
+ run_cmd "tc -n sw1 qdisc replace dev swp1 clsact"
+ run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+
+ run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+
+ run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+
+ # Initial state - check that packets are forwarded out of swp1 when it
+ # has a carrier and not forwarded out of any port when it does not have
+ # a carrier.
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 1
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 0
+ log_test $? 0 "No forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 1
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 0
+ log_test $? 0 "No forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ log_test $? 0 "swp1 carrier on"
+
+ # Configure vx0 as the backup port of swp1 and check that packets are
+ # forwarded out of swp1 when it has a carrier and out of vx0 when swp1
+ # does not have a carrier.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ log_test $? 0 "vx0 configured as backup port of swp1"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 2
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 0
+ log_test $? 0 "No forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 2
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "Forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ log_test $? 0 "swp1 carrier on"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 3
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "No forwarding out of vx0"
+
+ # Remove vx0 as the backup port of swp1 and check that packets are no
+ # longer forwarded out of vx0 when swp1 does not have a carrier.
+ run_cmd "bridge -n sw1 link set dev swp1 nobackup_port"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ log_test $? 1 "vx0 not configured as backup port of swp1"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 4
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "No forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 4
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "No forwarding out of vx0"
+}
+
+backup_nhid()
+{
+ local dmac=00:11:22:33:44:55
+ local smac=00:aa:bb:cc:dd:ee
+
+ echo
+ echo "Backup nexthop ID"
+ echo "-----------------"
+
+ run_cmd "tc -n sw1 qdisc replace dev swp1 clsact"
+ run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+
+ run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+
+ run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb"
+
+ run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+ run_cmd "bridge -n sw1 fdb replace $dmac dev vx0 self static dst 192.0.2.36 src_vni 10010"
+
+ run_cmd "ip -n sw2 address replace 192.0.2.36/32 dev lo"
+
+ # The first filter matches on packets forwarded using the backup
+ # nexthop ID and the second filter matches on packets forwarded using a
+ # regular VXLAN FDB entry.
+ run_cmd "tc -n sw2 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
+ run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 102 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.36 action pass"
+
+ # Configure vx0 as the backup port of swp1 and check that packets are
+ # forwarded out of swp1 when it has a carrier and out of vx0 when swp1
+ # does not have a carrier. When packets are forwarded out of vx0, check
+ # that they are forwarded by the VXLAN FDB entry.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ log_test $? 0 "vx0 configured as backup port of swp1"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 1
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 0
+ log_test $? 0 "No forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 1
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 0
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ tc_check_packets sw2 "dev vx0 ingress" 102 1
+ log_test $? 0 "Forwarding using VXLAN FDB entry"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ log_test $? 0 "swp1 carrier on"
+
+ # Configure nexthop ID 10 as the backup nexthop ID of swp1 and check
+ # that when packets are forwarded out of vx0, they are forwarded using
+ # the backup nexthop ID.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 10\""
+ log_test $? 0 "nexthop ID 10 configured as backup nexthop ID of swp1"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 2
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "No forwarding out of vx0"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 2
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 2
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "Forwarding using backup nexthop ID"
+ tc_check_packets sw2 "dev vx0 ingress" 102 1
+ log_test $? 0 "No forwarding using VXLAN FDB entry"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier on"
+ log_test $? 0 "swp1 carrier on"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 3
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 2
+ log_test $? 0 "No forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ tc_check_packets sw2 "dev vx0 ingress" 102 1
+ log_test $? 0 "No forwarding using VXLAN FDB entry"
+
+ # Reset the backup nexthop ID to 0 and check that packets are no longer
+ # forwarded using the backup nexthop ID when swp1 does not have a
+ # carrier and are instead forwarded by the VXLAN FDB.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 0"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid\""
+ log_test $? 1 "No backup nexthop ID configured for swp1"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 4
+ log_test $? 0 "Forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 2
+ log_test $? 0 "No forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ tc_check_packets sw2 "dev vx0 ingress" 102 1
+ log_test $? 0 "No forwarding using VXLAN FDB entry"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 4
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 3
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ tc_check_packets sw2 "dev vx0 ingress" 102 2
+ log_test $? 0 "Forwarding using VXLAN FDB entry"
+}
+
+backup_nhid_invalid()
+{
+ local dmac=00:11:22:33:44:55
+ local smac=00:aa:bb:cc:dd:ee
+ local tx_drop
+
+ echo
+ echo "Backup nexthop ID - invalid IDs"
+ echo "-------------------------------"
+
+ # Check that when traffic is redirected with an invalid nexthop ID, it
+ # is forwarded out of the VXLAN port, but dropped by the VXLAN driver
+ # and does not crash the host.
+
+ run_cmd "tc -n sw1 qdisc replace dev swp1 clsact"
+ run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+
+ run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
+ # Drop all other Tx traffic to avoid changes to Tx drop counter.
+ run_cmd "tc -n sw1 filter replace dev vx0 egress pref 2 handle 102 proto all matchall action drop"
+
+ tx_drop=$(ip -n sw1 -s -j link show dev vx0 | jq '.[]["stats64"]["tx"]["dropped"]')
+
+ run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb"
+
+ run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+
+ run_cmd "tc -n sw2 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
+
+ # First, check that redirection works.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_port vx0\""
+ log_test $? 0 "vx0 configured as backup port of swp1"
+
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 10\""
+ log_test $? 0 "Valid nexthop as backup nexthop"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ log_test $? 0 "swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 0
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 1
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "Forwarding using backup nexthop ID"
+ run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $tx_drop'"
+ log_test $? 0 "No Tx drop increase"
+
+ # Use a non-existent nexthop ID.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 20"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 20\""
+ log_test $? 0 "Non-existent nexthop as backup nexthop"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 0
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 2
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 1))'"
+ log_test $? 0 "Tx drop increased"
+
+ # Use a blckhole nexthop.
+ run_cmd "ip -n sw1 nexthop replace id 30 blackhole"
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 30"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 30\""
+ log_test $? 0 "Blackhole nexthop as backup nexthop"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 0
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 3
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 2))'"
+ log_test $? 0 "Tx drop increased"
+
+ # Non-group FDB nexthop.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 1"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 1\""
+ log_test $? 0 "Non-group FDB nexthop as backup nexthop"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 0
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 4
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 3))'"
+ log_test $? 0 "Tx drop increased"
+
+ # IPv6 address family nexthop.
+ run_cmd "ip -n sw1 nexthop replace id 100 via 2001:db8:100::1 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 200 via 2001:db8:100::1 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 300 group 100/200 fdb"
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 300"
+ run_cmd "bridge -n sw1 -d link show dev swp1 | grep \"backup_nhid 300\""
+ log_test $? 0 "IPv6 address family nexthop as backup nexthop"
+
+ run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1"
+ tc_check_packets sw1 "dev swp1 egress" 101 0
+ log_test $? 0 "No forwarding out of swp1"
+ tc_check_packets sw1 "dev vx0 egress" 101 5
+ log_test $? 0 "Forwarding out of vx0"
+ tc_check_packets sw2 "dev vx0 ingress" 101 1
+ log_test $? 0 "No forwarding using backup nexthop ID"
+ run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[][\"stats64\"][\"tx\"][\"dropped\"] == $((tx_drop + 4))'"
+ log_test $? 0 "Tx drop increased"
+}
+
+backup_nhid_ping()
+{
+ local sw1_mac
+ local sw2_mac
+
+ echo
+ echo "Backup nexthop ID - ping"
+ echo "------------------------"
+
+ # Test bidirectional traffic when traffic is redirected in both VTEPs.
+ sw1_mac=$(ip -n sw1 -j -p link show br0.10 | jq -r '.[]["address"]')
+ sw2_mac=$(ip -n sw2 -j -p link show br0.10 | jq -r '.[]["address"]')
+
+ run_cmd "bridge -n sw1 fdb replace $sw2_mac dev swp1 master static vlan 10"
+ run_cmd "bridge -n sw2 fdb replace $sw1_mac dev swp1 master static vlan 10"
+
+ run_cmd "ip -n sw1 neigh replace 192.0.2.66 lladdr $sw2_mac nud perm dev br0.10"
+ run_cmd "ip -n sw2 neigh replace 192.0.2.65 lladdr $sw1_mac nud perm dev br0.10"
+
+ run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw2 nexthop replace id 1 via 192.0.2.33 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 10 group 1 fdb"
+ run_cmd "ip -n sw2 nexthop replace id 10 group 1 fdb"
+
+ run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n sw2 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "bridge -n sw2 link set dev swp1 backup_nhid 10"
+
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+ run_cmd "ip -n sw2 link set dev swp1 carrier off"
+
+ run_cmd "ip netns exec sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66"
+ log_test $? 0 "Ping with backup nexthop ID"
+
+ # Reset the backup nexthop ID to 0 and check that ping fails.
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 0"
+ run_cmd "bridge -n sw2 link set dev swp1 backup_nhid 0"
+
+ run_cmd "ip netns exec sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66"
+ log_test $? 1 "Ping after disabling backup nexthop ID"
+}
+
+backup_nhid_add_del_loop()
+{
+ while true; do
+ ip -n sw1 nexthop del id 10
+ ip -n sw1 nexthop replace id 10 group 1/2 fdb
+ done >/dev/null 2>&1
+}
+
+backup_nhid_torture()
+{
+ local dmac=00:11:22:33:44:55
+ local smac=00:aa:bb:cc:dd:ee
+ local pid1
+ local pid2
+ local pid3
+
+ echo
+ echo "Backup nexthop ID - torture test"
+ echo "--------------------------------"
+
+ # Continuously send traffic through the backup nexthop while adding and
+ # deleting the group. The test is considered successful if nothing
+ # crashed.
+
+ run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb"
+ run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb"
+
+ run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10"
+
+ run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0"
+ run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10"
+ run_cmd "ip -n sw1 link set dev swp1 carrier off"
+
+ backup_nhid_add_del_loop &
+ pid1=$!
+ ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 0 &
+ pid2=$!
+
+ sleep 30
+ kill -9 $pid1 $pid2
+ wait $pid1 $pid2 2>/dev/null
+
+ log_test 0 0 "Torture test"
+}
+
+################################################################################
+# Usage
+
+usage()
+{
+ cat <<EOF
+usage: ${0##*/} OPTS
+
+ -t <test> Test(s) to run (default: all)
+ (options: $TESTS)
+ -p Pause on fail
+ -P Pause after each test before cleanup
+ -v Verbose mode (show commands and output)
+ -w Timeout for ping
+EOF
+}
+
+################################################################################
+# Main
+
+trap cleanup EXIT
+
+while getopts ":t:pPvhw:" opt; do
+ case $opt in
+ t) TESTS=$OPTARG;;
+ p) PAUSE_ON_FAIL=yes;;
+ P) PAUSE=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ w) PING_TIMEOUT=$OPTARG;;
+ h) usage; exit 0;;
+ *) usage; exit 1;;
+ esac
+done
+
+# Make sure we don't pause twice.
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v bridge)" ]; then
+ echo "SKIP: Could not run test without bridge tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v tc)" ]; then
+ echo "SKIP: Could not run test without tc tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v mausezahn)" ]; then
+ echo "SKIP: Could not run test without mausezahn tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v jq)" ]; then
+ echo "SKIP: Could not run test without jq tool"
+ exit $ksft_skip
+fi
+
+bridge link help 2>&1 | grep -q "backup_nhid"
+if [ $? -ne 0 ]; then
+ echo "SKIP: iproute2 bridge too old, missing backup nexthop ID support"
+ exit $ksft_skip
+fi
+
+# Start clean.
+cleanup
+
+for t in $TESTS
+do
+ setup; $t; cleanup;
+done
+
+if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+fi
+
+exit $ret
Add test cases for bridge backup port and backup nexthop ID, testing both good and bad flows. Example truncated output: # ./test_bridge_backup_port.sh [...] Tests passed: 83 Tests failed: 0 Signed-off-by: Ido Schimmel <idosch@nvidia.com> --- tools/testing/selftests/net/Makefile | 1 + .../selftests/net/test_bridge_backup_port.sh | 759 ++++++++++++++++++ 2 files changed, 760 insertions(+) create mode 100755 tools/testing/selftests/net/test_bridge_backup_port.sh