Message ID | 20230717164307.2868264-1-m.felsch@pengutronix.de (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [net-next,1/2] dt-bindings: net: snps,dwmac: add phy-supply support | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Clearly marked for net-next |
netdev/apply | fail | Patch does not apply to net-next |
On 17/07/2023 18:43, Marco Felsch wrote: > Document the common phy-supply property to be able to specify a phy > regulator. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > --- > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > index 363b3e3ea3a60..f66d1839cf561 100644 > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > @@ -159,6 +159,9 @@ properties: > can be passive (no SW requirement), and requires that the MAC operate > in a different mode than the PHY in order to function. > > + phy-supply: > + description: PHY regulator > + Isn't this property of the PHY? Why would the Ethernet controller play with a supply of a phy? Best regards, Krzysztof
On 23-07-17, Krzysztof Kozlowski wrote: > On 17/07/2023 18:43, Marco Felsch wrote: > > Document the common phy-supply property to be able to specify a phy > > regulator. > > > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > > --- > > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++ > > 1 file changed, 3 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > > index 363b3e3ea3a60..f66d1839cf561 100644 > > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml > > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > > @@ -159,6 +159,9 @@ properties: > > can be passive (no SW requirement), and requires that the MAC operate > > in a different mode than the PHY in order to function. > > > > + phy-supply: > > + description: PHY regulator > > + > > Isn't this property of the PHY? Why would the Ethernet controller play > with a supply of a phy? Because this is the current state. Please check the all other MACs handling the phy-supply (if supported). Some of them handling it under the mdio-node (not the phy-node) but most bindings do specify this on MAC level (e.g. FEC, DWMAC (suni, rk)). I agree that the phy sould handle this but this would be a lot more effort and since the dwmac-sun8i/rk bindings do support this on MAC level I would keep it that way. Regards, Marco
On 17/07/2023 18:57, Marco Felsch wrote: > On 23-07-17, Krzysztof Kozlowski wrote: >> On 17/07/2023 18:43, Marco Felsch wrote: >>> Document the common phy-supply property to be able to specify a phy >>> regulator. >>> >>> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> >>> --- >>> Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++ >>> 1 file changed, 3 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>> index 363b3e3ea3a60..f66d1839cf561 100644 >>> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml >>> @@ -159,6 +159,9 @@ properties: >>> can be passive (no SW requirement), and requires that the MAC operate >>> in a different mode than the PHY in order to function. >>> >>> + phy-supply: >>> + description: PHY regulator >>> + >> >> Isn't this property of the PHY? Why would the Ethernet controller play >> with a supply of a phy? > > Because this is the current state. Please check the all other MACs > handling the phy-supply (if supported). Some of them handling it under > the mdio-node (not the phy-node) but most bindings do specify this on > MAC level (e.g. FEC, DWMAC (suni, rk)). > > I agree that the phy sould handle this but this would be a lot more > effort and since the dwmac-sun8i/rk bindings do support this on MAC > level I would keep it that way. Indeed phy bindings do not allow a supply. Best regards, Krzysztof
On 17/07/2023 18:43, Marco Felsch wrote: > Document the common phy-supply property to be able to specify a phy > regulator. > > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> > --- Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 363b3e3ea3a60..f66d1839cf561 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -159,6 +159,9 @@ properties: can be passive (no SW requirement), and requires that the MAC operate in a different mode than the PHY in order to function. + phy-supply: + description: PHY regulator + snps,axi-config: $ref: /schemas/types.yaml#/definitions/phandle description:
Document the common phy-supply property to be able to specify a phy regulator. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 3 +++ 1 file changed, 3 insertions(+)