diff mbox series

[net-next,v2,3/5] net: phy: update in-band AN mode when changing interface by PHY driver

Message ID 20230804084527.2082302-4-yong.liang.choong@linux.intel.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series TSN auto negotiation between 1G and 2.5G | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next, async
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1727 this patch: 1727
netdev/cc_maintainers success CCed 10 of 10 maintainers
netdev/build_clang success Errors and warnings before: 1630 this patch: 1630
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1736 this patch: 1736
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 60 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Choong Yong Liang Aug. 4, 2023, 8:45 a.m. UTC 
From: "Tan, Tee Min" <tee.min.tan@linux.intel.com>

Add cur_link_an_mode into phy_device struct for PHY drivers to
communicate the in-band AN mode setting with phylink framework.

As there is a mechanism in PHY drivers to switch the PHY interface
between SGMII and 2500BaseX according to link speed. In this case,
the in-band AN mode should be switching based on the PHY interface
as well, if the PHY interface has been changed/updated by PHY driver.

For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
back for SGMII mode (10/100/1000Mbps).

Signed-off-by: Tan, Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
---
 drivers/net/phy/marvell10g.c | 6 ++++++
 drivers/net/phy/phylink.c    | 4 ++++
 include/linux/phy.h          | 3 +++
 3 files changed, 13 insertions(+)

Comments

Russell King (Oracle) Aug. 4, 2023, 9:02 a.m. UTC | #1 
On Fri, Aug 04, 2023 at 04:45:25PM +0800, Choong Yong Liang wrote:
> From: "Tan, Tee Min" <tee.min.tan@linux.intel.com>
> 
> Add cur_link_an_mode into phy_device struct for PHY drivers to
> communicate the in-band AN mode setting with phylink framework.
> 
> As there is a mechanism in PHY drivers to switch the PHY interface
> between SGMII and 2500BaseX according to link speed. In this case,
> the in-band AN mode should be switching based on the PHY interface
> as well, if the PHY interface has been changed/updated by PHY driver.
> 
> For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
> back for SGMII mode (10/100/1000Mbps).
> 
> Signed-off-by: Tan, Tee Min <tee.min.tan@linux.intel.com>
> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
> ---
>  drivers/net/phy/marvell10g.c | 6 ++++++
>  drivers/net/phy/phylink.c    | 4 ++++
>  include/linux/phy.h          | 3 +++
>  3 files changed, 13 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
> index d4bb90d76881..a9df19278618 100644
> --- a/drivers/net/phy/marvell10g.c
> +++ b/drivers/net/phy/marvell10g.c
> @@ -30,6 +30,7 @@
>  #include <linux/phy.h>
>  #include <linux/sfp.h>
>  #include <linux/netdevice.h>
> +#include <linux/phylink.h>
>  
>  #define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
>  #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
> @@ -946,6 +947,9 @@ static void mv3310_update_interface(struct phy_device *phydev)
>  	 * xaui / rxaui modes according to the speed.
>  	 * Florian suggests setting phydev->interface to communicate this to the
>  	 * MAC. Only do this if we are already in one of the above modes.
> +	 * In-band Auto-negotiation is not supported in 2500BASE-X.
> +	 * Setting phydev->cur_link_an_mode to communicate this to the
> +	 * phylink framework.
>  	 */
>  	switch (phydev->speed) {
>  	case SPEED_10000:
> @@ -956,11 +960,13 @@ static void mv3310_update_interface(struct phy_device *phydev)
>  		break;
>  	case SPEED_2500:
>  		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
> +		phydev->cur_link_an_mode = MLO_AN_PHY;
>  		break;
>  	case SPEED_1000:
>  	case SPEED_100:
>  	case SPEED_10:
>  		phydev->interface = PHY_INTERFACE_MODE_SGMII;
> +		phydev->cur_link_an_mode = MLO_AN_INBAND;
>  		break;
>  	default:
>  		break;
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 4f1c8bb199e9..f9cbb6d7e134 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -1720,6 +1720,8 @@ static void phylink_phy_change(struct phy_device *phydev, bool up)
>  		pl->phy_state.pause |= MLO_PAUSE_RX;
>  	pl->phy_state.interface = phydev->interface;
>  	pl->phy_state.link = up;
> +	pl->cur_link_an_mode = phydev->cur_link_an_mode;
> +	pl->cfg_link_an_mode = phydev->cur_link_an_mode;
>  	mutex_unlock(&pl->state_mutex);
>  
>  	phylink_run_resolve(pl);
> @@ -1824,6 +1826,8 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
>  	if (pl->config->mac_managed_pm)
>  		phy->mac_managed_pm = true;
>  
> +	pl->phydev->cur_link_an_mode = pl->cur_link_an_mode;

I am really not happy with exposing phylink's AN mode into phylib.
Choong Yong Liang Aug. 10, 2023, 9:23 a.m. UTC | #2 
On 4/8/2023 5:02 pm, Russell King (Oracle) wrote:
> On Fri, Aug 04, 2023 at 04:45:25PM +0800, Choong Yong Liang wrote:
>> From: "Tan, Tee Min" <tee.min.tan@linux.intel.com>
>>
>> Add cur_link_an_mode into phy_device struct for PHY drivers to
>> communicate the in-band AN mode setting with phylink framework.
>>
>> As there is a mechanism in PHY drivers to switch the PHY interface
>> between SGMII and 2500BaseX according to link speed. In this case,
>> the in-band AN mode should be switching based on the PHY interface
>> as well, if the PHY interface has been changed/updated by PHY driver.
>>
>> For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
>> back for SGMII mode (10/100/1000Mbps).
>>
>> Signed-off-by: Tan, Tee Min <tee.min.tan@linux.intel.com>
>> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
>> ---
>>   drivers/net/phy/marvell10g.c | 6 ++++++
>>   drivers/net/phy/phylink.c    | 4 ++++
>>   include/linux/phy.h          | 3 +++
>>   3 files changed, 13 insertions(+)
>>
>> diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
>> index d4bb90d76881..a9df19278618 100644
>> --- a/drivers/net/phy/marvell10g.c
>> +++ b/drivers/net/phy/marvell10g.c
>> @@ -30,6 +30,7 @@
>>   #include <linux/phy.h>
>>   #include <linux/sfp.h>
>>   #include <linux/netdevice.h>
>> +#include <linux/phylink.h>
>>   
>>   #define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
>>   #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
>> @@ -946,6 +947,9 @@ static void mv3310_update_interface(struct phy_device *phydev)
>>   	 * xaui / rxaui modes according to the speed.
>>   	 * Florian suggests setting phydev->interface to communicate this to the
>>   	 * MAC. Only do this if we are already in one of the above modes.
>> +	 * In-band Auto-negotiation is not supported in 2500BASE-X.
>> +	 * Setting phydev->cur_link_an_mode to communicate this to the
>> +	 * phylink framework.
>>   	 */
>>   	switch (phydev->speed) {
>>   	case SPEED_10000:
>> @@ -956,11 +960,13 @@ static void mv3310_update_interface(struct phy_device *phydev)
>>   		break;
>>   	case SPEED_2500:
>>   		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
>> +		phydev->cur_link_an_mode = MLO_AN_PHY;
>>   		break;
>>   	case SPEED_1000:
>>   	case SPEED_100:
>>   	case SPEED_10:
>>   		phydev->interface = PHY_INTERFACE_MODE_SGMII;
>> +		phydev->cur_link_an_mode = MLO_AN_INBAND;
>>   		break;
>>   	default:
>>   		break;
>> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
>> index 4f1c8bb199e9..f9cbb6d7e134 100644
>> --- a/drivers/net/phy/phylink.c
>> +++ b/drivers/net/phy/phylink.c
>> @@ -1720,6 +1720,8 @@ static void phylink_phy_change(struct phy_device *phydev, bool up)
>>   		pl->phy_state.pause |= MLO_PAUSE_RX;
>>   	pl->phy_state.interface = phydev->interface;
>>   	pl->phy_state.link = up;
>> +	pl->cur_link_an_mode = phydev->cur_link_an_mode;
>> +	pl->cfg_link_an_mode = phydev->cur_link_an_mode;
>>   	mutex_unlock(&pl->state_mutex);
>>   
>>   	phylink_run_resolve(pl);
>> @@ -1824,6 +1826,8 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
>>   	if (pl->config->mac_managed_pm)
>>   		phy->mac_managed_pm = true;
>>   
>> +	pl->phydev->cur_link_an_mode = pl->cur_link_an_mode;
> 
> I am really not happy with exposing phylink's AN mode into phylib.
> 
Hi Russell,

Thank you for the feedback.
After conducting further analysis on my end, it appears that this line 
"pl->phydev->cur_link_an_mode = pl->cur_link_an_mode;" is not necessary.
If we remove this line of code, would the implementation of this patch be 
acceptable to you?
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index d4bb90d76881..a9df19278618 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -30,6 +30,7 @@ 
 #include <linux/phy.h>
 #include <linux/sfp.h>
 #include <linux/netdevice.h>
+#include <linux/phylink.h>
 
 #define MV_PHY_ALASKA_NBT_QUIRK_MASK	0xfffffffe
 #define MV_PHY_ALASKA_NBT_QUIRK_REV	(MARVELL_PHY_ID_88X3310 | 0xa)
@@ -946,6 +947,9 @@  static void mv3310_update_interface(struct phy_device *phydev)
 	 * xaui / rxaui modes according to the speed.
 	 * Florian suggests setting phydev->interface to communicate this to the
 	 * MAC. Only do this if we are already in one of the above modes.
+	 * In-band Auto-negotiation is not supported in 2500BASE-X.
+	 * Setting phydev->cur_link_an_mode to communicate this to the
+	 * phylink framework.
 	 */
 	switch (phydev->speed) {
 	case SPEED_10000:
@@ -956,11 +960,13 @@  static void mv3310_update_interface(struct phy_device *phydev)
 		break;
 	case SPEED_2500:
 		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+		phydev->cur_link_an_mode = MLO_AN_PHY;
 		break;
 	case SPEED_1000:
 	case SPEED_100:
 	case SPEED_10:
 		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+		phydev->cur_link_an_mode = MLO_AN_INBAND;
 		break;
 	default:
 		break;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 4f1c8bb199e9..f9cbb6d7e134 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1720,6 +1720,8 @@  static void phylink_phy_change(struct phy_device *phydev, bool up)
 		pl->phy_state.pause |= MLO_PAUSE_RX;
 	pl->phy_state.interface = phydev->interface;
 	pl->phy_state.link = up;
+	pl->cur_link_an_mode = phydev->cur_link_an_mode;
+	pl->cfg_link_an_mode = phydev->cur_link_an_mode;
 	mutex_unlock(&pl->state_mutex);
 
 	phylink_run_resolve(pl);
@@ -1824,6 +1826,8 @@  static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
 	if (pl->config->mac_managed_pm)
 		phy->mac_managed_pm = true;
 
+	pl->phydev->cur_link_an_mode = pl->cur_link_an_mode;
+
 	return 0;
 }
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ba08b0e60279..4973f2852a79 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -619,6 +619,7 @@  struct macsec_ops;
  * @link_down_events: Number of times link was lost
  * @shared: Pointer to private data shared by phys in one package
  * @priv: Pointer to driver private data
+ * @cur_link_an_mode: Current AN mode setting with phylink framework
  *
  * interrupts currently only supports enabled or disabled,
  * but could be changed in the future to support enabling
@@ -757,6 +758,8 @@  struct phy_device {
 	/* MACsec management functions */
 	const struct macsec_ops *macsec_ops;
 #endif
+	/* For communicate the AN mode setting with phylink framework. */
+	u8 cur_link_an_mode;
 };
 
 /* Generic phy_device::dev_flags */