@@ -1181,7 +1181,6 @@ int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
unsigned int size;
u16 stat_err_bits;
u16 vlan_tag = 0;
- u16 rx_ptype;
/* get the Rx desc from Rx ring based on 'next_to_clean' */
rx_desc = ICE_RX_DESC(rx_ring, ntc);
@@ -1286,10 +1285,7 @@ int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
total_rx_bytes += skb->len;
/* populate checksum, VLAN, and protocol */
- rx_ptype = le16_to_cpu(rx_desc->wb.ptype_flex_flags0) &
- ICE_RX_FLEX_DESC_PTYPE_M;
-
- ice_process_skb_fields(rx_ring, rx_desc, skb, rx_ptype);
+ ice_process_skb_fields(rx_ring, rx_desc, skb);
ice_trace(clean_rx_irq_indicate, rx_ring, rx_desc, skb);
/* send completed skb up the stack */
@@ -241,12 +241,21 @@ ice_ptp_rx_hwts_to_skb(struct ice_rx_ring *rx_ring,
};
}
+/**
+ * ice_get_ptype - Read HW packet type from the descriptor
+ * @rx_desc: RX descriptor
+ */
+static u16 ice_get_ptype(const union ice_32b_rx_flex_desc *rx_desc)
+{
+ return le16_to_cpu(rx_desc->wb.ptype_flex_flags0) &
+ ICE_RX_FLEX_DESC_PTYPE_M;
+}
+
/**
* ice_process_skb_fields - Populate skb header fields from Rx descriptor
* @rx_ring: Rx descriptor ring packet is being transacted on
* @rx_desc: pointer to the EOP Rx descriptor
* @skb: pointer to current skb being populated
- * @ptype: the packet type decoded by hardware
*
* This function checks the ring, descriptor, and packet information in
* order to populate the hash, checksum, VLAN, protocol, and
@@ -255,8 +264,10 @@ ice_ptp_rx_hwts_to_skb(struct ice_rx_ring *rx_ring,
void
ice_process_skb_fields(struct ice_rx_ring *rx_ring,
union ice_32b_rx_flex_desc *rx_desc,
- struct sk_buff *skb, u16 ptype)
+ struct sk_buff *skb)
{
+ u16 ptype = ice_get_ptype(rx_desc);
+
ice_rx_hash_to_skb(rx_ring, rx_desc, skb, ptype);
/* modifies the skb - consumes the enet header */
@@ -148,7 +148,7 @@ void ice_release_rx_desc(struct ice_rx_ring *rx_ring, u16 val);
void
ice_process_skb_fields(struct ice_rx_ring *rx_ring,
union ice_32b_rx_flex_desc *rx_desc,
- struct sk_buff *skb, u16 ptype);
+ struct sk_buff *skb);
void
ice_receive_skb(struct ice_rx_ring *rx_ring, struct sk_buff *skb, u16 vlan_tag);
#endif /* !_ICE_TXRX_LIB_H_ */
@@ -870,7 +870,6 @@ int ice_clean_rx_irq_zc(struct ice_rx_ring *rx_ring, int budget)
struct sk_buff *skb;
u16 stat_err_bits;
u16 vlan_tag = 0;
- u16 rx_ptype;
rx_desc = ICE_RX_DESC(rx_ring, ntc);
@@ -950,10 +949,7 @@ int ice_clean_rx_irq_zc(struct ice_rx_ring *rx_ring, int budget)
vlan_tag = ice_get_vlan_tag_from_rx_desc(rx_desc);
- rx_ptype = le16_to_cpu(rx_desc->wb.ptype_flex_flags0) &
- ICE_RX_FLEX_DESC_PTYPE_M;
-
- ice_process_skb_fields(rx_ring, rx_desc, skb, rx_ptype);
+ ice_process_skb_fields(rx_ring, rx_desc, skb);
ice_receive_skb(rx_ring, skb, vlan_tag);
}
Currently, rx_ptype variable is used only as an argument to ice_process_skb_fields() and is computed just before the function call. Therefore, there is no reason to pass this value as an argument. Instead, remove this argument and compute the value directly inside ice_process_skb_fields() function. Also, separate its calculation into a short function, so the code can later be reused in .xmo_() callbacks. Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> --- drivers/net/ethernet/intel/ice/ice_txrx.c | 6 +----- drivers/net/ethernet/intel/ice/ice_txrx_lib.c | 15 +++++++++++++-- drivers/net/ethernet/intel/ice/ice_txrx_lib.h | 2 +- drivers/net/ethernet/intel/ice/ice_xsk.c | 6 +----- 4 files changed, 16 insertions(+), 13 deletions(-)