| Message ID | 20230921150622.599232-2-christophe.roullier@foss.st.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Series to deliver Ethernets for STM32MP13 | expand |
| Context | Check | Description |
|---|---|---|
| netdev/series_format | success | Posting correctly formatted |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/fixes_present | success | Fixes tag not required for -next series |
| netdev/header_inline | success | No static functions without inline keyword in header files |
| netdev/build_32bit | success | Errors and warnings before: 9 this patch: 9 |
| netdev/cc_maintainers | success | CCed 15 of 15 maintainers |
| netdev/build_clang | success | Errors and warnings before: 9 this patch: 9 |
| netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
| netdev/deprecated_api | success | None detected |
| netdev/check_selftest | success | No net selftest shell script |
| netdev/verify_fixes | success | No Fixes tag |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 9 this patch: 9 |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 187 lines checked |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/source_inline | success | Was 0 now: 0 |
Yo, On Thu, Sep 21, 2023 at 05:06:16PM +0200, Christophe Roullier wrote: > New STM32 SOC have 2 GMACs instances. > GMAC IP version is SNPS 4.20. > > Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> > --- > .../devicetree/bindings/net/stm32-dwmac.yaml | 140 +++++++++++++++--- > 1 file changed, 118 insertions(+), 22 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml > index fc8c96b08d7d..75836916c38c 100644 > --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml > @@ -22,15 +22,17 @@ select: > enum: > - st,stm32-dwmac > - st,stm32mp1-dwmac > + - st,stm32mp13-dwmac > required: > - compatible > > -allOf: > - - $ref: snps,dwmac.yaml# > - > properties: > compatible: > oneOf: > + - items: > + - enum: > + - st,stm32mp13-dwmac > + - const: snps,dwmac-4.20a The enum just below this is also for the 4.20a, no? Why not just put this mp13 compatible into that enum? > - items: > - enum: > - st,stm32mp1-dwmac > @@ -72,27 +74,69 @@ properties: > - eth-ck > - ptp_ref > > - st,syscon: Please try to avoid defining properties inside if/then/else sections and only move the variable bits if possible. > - $ref: /schemas/types.yaml#/definitions/phandle-array > - items: > - - items: > - - description: phandle to the syscon node which encompases the glue register > - - description: offset of the control register > + phy-supply: > + description: PHY regulator > + > + st,ext-phyclk: > description: > - Should be phandle/offset pair. The phandle to the syscon node which > - encompases the glue register, and the offset of the control register > + set this property in RMII mode when you have PHY without crystal 50MHz and want to > + select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select > + RCC clock instead of ETH_CLK125. > + type: boolean > > st,eth-clk-sel: > + deprecated: true Why have these been marked as deprecated? That doesn't appear to be mention in the commit message & sounds like it should be a different commit. > description: > set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. > type: boolean > > st,eth-ref-clk-sel: > + deprecated: true Ditto. > description: > set this property in RMII mode when you have PHY without crystal 50MHz and want to > select RCC clock instead of ETH_REF_CLK. > type: boolean > > +allOf: > + - $ref: snps,dwmac.yaml# > + - if: > + properties: > + compatible: > + contains: > + enum: > + - st,stm32mp1-dwmac > + - st,stm32-dwmac > + then: > + properties: > + st,syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + - items: > + - description: phandle to the syscon node which encompases the glue register > + - description: offset of the control register > + description: > + Should be phandle/offset pair. The phandle to the syscon node which > + encompases the glue register, and the offset of the control register > + - if: > + properties: > + compatible: > + contains: > + enum: > + - st,stm32mp13-dwmac You've got 2 if/then sections containing tests for 3 compatibles. There are only 2 compatibles total right now & 3 with the patch, so it looks like you'd get away with if/then/else instead. > + then: > + properties: > + st,syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + - items: > + - description: phandle to the syscon node which encompases the glue register > + - description: offset of the control register > + - description: field to set mask in register > + description: > + Should be phandle/offset pair. The phandle to the syscon node which > + encompases the glue register, the offset of the control register and > + the mask to set bitfield in control register > + > required: > - compatible > - clocks > @@ -112,24 +156,36 @@ examples: > compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; I don't understand why this existing example is changing. Thanks, Conor. > reg = <0x5800a000 0x2000>; > reg-names = "stmmaceth"; > - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "macirq"; > + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, > + <&exti 70 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq", > + "eth_wake_irq"; > clock-names = "stmmaceth", > - "mac-clk-tx", > - "mac-clk-rx", > - "ethstp", > - "eth-ck"; > + "mac-clk-tx", > + "mac-clk-rx", > + "eth-ck", > + "ptp_ref", > + "ethstp"; > clocks = <&rcc ETHMAC>, > - <&rcc ETHTX>, > - <&rcc ETHRX>, > - <&rcc ETHSTP>, > - <&rcc ETHCK_K>; > + <&rcc ETHTX>, > + <&rcc ETHRX>, > + <&rcc ETHCK_K>, > + <&rcc ETHPTP_K>, > + <&rcc ETHSTP>; > st,syscon = <&syscfg 0x4>; > + snps,mixed-burst; > snps,pbl = <2>; > + snps,en-tx-lpi-clockgating; > snps,axi-config = <&stmmac_axi_config_0>; > snps,tso; > phy-mode = "rgmii"; > - }; > + > + stmmac_axi_config_0: stmmac-axi-config { > + snps,wr_osr_lmt = <0x7>; > + snps,rd_osr_lmt = <0x7>; > + snps,blen = <0 0 0 0 16 8 4>; > + }; > + }; > > - | > //Example 2 (MCU example) > @@ -161,3 +217,43 @@ examples: > snps,pbl = <8>; > phy-mode = "mii"; > }; > + > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/stm32mp1-clks.h> > + #include <dt-bindings/reset/stm32mp1-resets.h> > + #include <dt-bindings/mfd/stm32h7-rcc.h> > + //Example 4 > + ethernet3: ethernet@5800a000 { > + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; > + reg = <0x5800a000 0x2000>; > + reg-names = "stmmaceth"; > + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, > + <&exti 68 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "macirq", > + "eth_wake_irq"; > + clock-names = "stmmaceth", > + "mac-clk-tx", > + "mac-clk-rx", > + "eth-ck", > + "ptp_ref", > + "ethstp"; > + clocks = <&rcc ETHMAC>, > + <&rcc ETHTX>, > + <&rcc ETHRX>, > + <&rcc ETHCK_K>, > + <&rcc ETHPTP_K>, > + <&rcc ETHSTP>; > + st,syscon = <&syscfg 0x4 0xff0000>; > + snps,mixed-burst; > + snps,pbl = <2>; > + snps,axi-config = <&stmmac_axi_config_1>; > + snps,tso; > + phy-mode = "rmii"; > + > + stmmac_axi_config_1: stmmac-axi-config { > + snps,wr_osr_lmt = <0x7>; > + snps,rd_osr_lmt = <0x7>; > + snps,blen = <0 0 0 0 16 8 4>; > + }; > + }; > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fc8c96b08d7d..75836916c38c 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -22,15 +22,17 @@ select: enum: - st,stm32-dwmac - st,stm32mp1-dwmac + - st,stm32mp13-dwmac required: - compatible -allOf: - - $ref: snps,dwmac.yaml# - properties: compatible: oneOf: + - items: + - enum: + - st,stm32mp13-dwmac + - const: snps,dwmac-4.20a - items: - enum: - st,stm32mp1-dwmac @@ -72,27 +74,69 @@ properties: - eth-ck - ptp_ref - st,syscon: - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - - items: - - description: phandle to the syscon node which encompases the glue register - - description: offset of the control register + phy-supply: + description: PHY regulator + + st,ext-phyclk: description: - Should be phandle/offset pair. The phandle to the syscon node which - encompases the glue register, and the offset of the control register + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select + RCC clock instead of ETH_CLK125. + type: boolean st,eth-clk-sel: + deprecated: true description: set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. type: boolean st,eth-ref-clk-sel: + deprecated: true description: set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. type: boolean +allOf: + - $ref: snps,dwmac.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32mp1-dwmac + - st,stm32-dwmac + then: + properties: + st,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the syscon node which encompases the glue register + - description: offset of the control register + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, and the offset of the control register + - if: + properties: + compatible: + contains: + enum: + - st,stm32mp13-dwmac + then: + properties: + st,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the syscon node which encompases the glue register + - description: offset of the control register + - description: field to set mask in register + description: + Should be phandle/offset pair. The phandle to the syscon node which + encompases the glue register, the offset of the control register and + the mask to set bitfield in control register + required: - compatible - clocks @@ -112,24 +156,36 @@ examples: compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; reg = <0x5800a000 0x2000>; reg-names = "stmmaceth"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <&exti 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", + "eth_wake_irq"; clock-names = "stmmaceth", - "mac-clk-tx", - "mac-clk-rx", - "ethstp", - "eth-ck"; + "mac-clk-tx", + "mac-clk-rx", + "eth-ck", + "ptp_ref", + "ethstp"; clocks = <&rcc ETHMAC>, - <&rcc ETHTX>, - <&rcc ETHRX>, - <&rcc ETHSTP>, - <&rcc ETHCK_K>; + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHCK_K>, + <&rcc ETHPTP_K>, + <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; + snps,mixed-burst; snps,pbl = <2>; + snps,en-tx-lpi-clockgating; snps,axi-config = <&stmmac_axi_config_0>; snps,tso; phy-mode = "rgmii"; - }; + + stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + }; - | //Example 2 (MCU example) @@ -161,3 +217,43 @@ examples: snps,pbl = <8>; phy-mode = "mii"; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + #include <dt-bindings/mfd/stm32h7-rcc.h> + //Example 4 + ethernet3: ethernet@5800a000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <&exti 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", + "eth_wake_irq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "eth-ck", + "ptp_ref", + "ethstp"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHCK_K>, + <&rcc ETHPTP_K>, + <&rcc ETHSTP>; + st,syscon = <&syscfg 0x4 0xff0000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_1>; + snps,tso; + phy-mode = "rmii"; + + stmmac_axi_config_1: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + };
New STM32 SOC have 2 GMACs instances. GMAC IP version is SNPS 4.20. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> --- .../devicetree/bindings/net/stm32-dwmac.yaml | 140 +++++++++++++++--- 1 file changed, 118 insertions(+), 22 deletions(-)