diff mbox series

[v2,08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding

Message ID 20230928122427.313271-9-christophe.roullier@foss.st.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Series to deliver Ethernets for STM32MP13 | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1340 this patch: 1340
netdev/cc_maintainers success CCed 12 of 12 maintainers
netdev/build_clang success Errors and warnings before: 1363 this patch: 1363
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1363 this patch: 1363
netdev/checkpatch warning WARNING: From:/Signed-off-by: email address mismatch: 'From: Christophe Roullier <christophe.roullier@st.com>' != 'Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>'
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Christophe Roullier Sept. 28, 2023, 12:24 p.m. UTC 
From: Christophe Roullier <christophe.roullier@st.com>

Configure the phy regulator if defined by the "phy-supply" DT phandle.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

Comments

Andrew Lunn Sept. 28, 2023, 5:53 p.m. UTC | #1 
> +static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)

I find this function name confusing, since 50% of the time it does not
actually power the PHY on. You never call it with anything other than
a static true/false value. So it might was well be two functions,
phy_power_on() and phy_power_off().

> +{
> +	int ret;
> +	struct device *dev = bsp_priv->dev;
> +
> +	if (!bsp_priv->regulator)
> +		return 0;
> +
> +	if (enable) {
> +		ret = regulator_enable(bsp_priv->regulator);
> +		if (ret)
> +			dev_err(dev, "fail to enable phy-supply\n");

Not all PHYs are usable in 0 picoseconds. You probably want a delay
here. Otherwise the first few accesses to it might not work.

      Andrew
Christophe Roullier Oct. 5, 2023, 11:21 a.m. UTC | #2 
On 9/28/23 19:53, Andrew Lunn wrote:
>> +static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
> I find this function name confusing, since 50% of the time it does not
> actually power the PHY on. You never call it with anything other than
> a static true/false value. So it might was well be two functions,
> phy_power_on() and phy_power_off().

Hi,

I wanted to keep same implementation of all others Ethernet glues 
(dwmac-rk.c ...) to be consistent.

>> +{
>> +	int ret;
>> +	struct device *dev = bsp_priv->dev;
>> +
>> +	if (!bsp_priv->regulator)
>> +		return 0;
>> +
>> +	if (enable) {
>> +		ret = regulator_enable(bsp_priv->regulator);
>> +		if (ret)
>> +			dev_err(dev, "fail to enable phy-supply\n");
> Not all PHYs are usable in 0 picoseconds. You probably want a delay
> here. Otherwise the first few accesses to it might not work.
>
>        Andrew

You're right I will add a delay.

Thanks

Christophe
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 72dda71850d75..31e3abd2caeaa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -14,6 +14,7 @@ 
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -84,6 +85,7 @@  struct stm32_dwmac {
 	u32 mode_reg;		 /* MAC glue-logic mode register */
 	u32 mode_mask;
 	struct regmap *regmap;
+	struct regulator *regulator;
 	u32 speed;
 	const struct stm32_ops *ops;
 	struct device *dev;
@@ -309,6 +311,16 @@  static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
 	if (err)
 		pr_debug("Warning sysconfig register mask not set\n");
 
+	dwmac->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(dwmac->regulator)) {
+		if (PTR_ERR(dwmac->regulator) == -EPROBE_DEFER) {
+			dev_dbg(dev, "phy regulator is not available yet, deferred probing\n");
+			return -EPROBE_DEFER;
+		}
+		dev_dbg(dev, "no regulator found\n");
+		dwmac->regulator = NULL;
+	}
+
 	return 0;
 }
 
@@ -367,6 +379,27 @@  static int stm32_dwmac_wake_init(struct device *dev,
 	return 0;
 }
 
+static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
+{
+	int ret;
+	struct device *dev = bsp_priv->dev;
+
+	if (!bsp_priv->regulator)
+		return 0;
+
+	if (enable) {
+		ret = regulator_enable(bsp_priv->regulator);
+		if (ret)
+			dev_err(dev, "fail to enable phy-supply\n");
+	} else {
+		ret = regulator_disable(bsp_priv->regulator);
+		if (ret)
+			dev_err(dev, "fail to disable phy-supply\n");
+	}
+
+	return 0;
+}
+
 static int stm32_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -414,12 +447,18 @@  static int stm32_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_wake_init_disable;
 
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	ret = phy_power_on(plat_dat->bsp_priv, true);
 	if (ret)
 		goto err_clk_disable;
 
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto err_gmac_powerdown;
+
 	return 0;
 
+err_gmac_powerdown:
+	phy_power_on(plat_dat->bsp_priv, false);
 err_clk_disable:
 	stm32_dwmac_clk_disable(dwmac);
 err_wake_init_disable:
@@ -440,6 +479,8 @@  static void stm32_dwmac_remove(struct platform_device *pdev)
 
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
+
+	phy_power_on(priv->plat->bsp_priv, false);
 }
 
 static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
@@ -455,12 +496,20 @@  static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
 	if (dwmac->enable_eth_ck)
 		clk_disable_unprepare(dwmac->clk_eth_ck);
 
+	/* Keep the PHY up if we use Wake-on-Lan. */
+	if (!device_may_wakeup(dwmac->dev))
+		phy_power_on(dwmac, false);
+
 	return ret;
 }
 
 static void stm32mp1_resume(struct stm32_dwmac *dwmac)
 {
 	clk_disable_unprepare(dwmac->clk_ethstp);
+
+	/* The PHY was up for Wake-on-Lan. */
+	if (!device_may_wakeup(dwmac->dev))
+		phy_power_on(dwmac, true);
 }
 
 static int stm32mcu_suspend(struct stm32_dwmac *dwmac)