@@ -2031,78 +2031,6 @@ struct ice_aqc_add_rdma_qset_data {
struct ice_aqc_add_tx_rdma_qset_entry rdma_qsets[];
};
-/* Configure Firmware Logging Command (indirect 0xFF09)
- * Logging Information Read Response (indirect 0xFF10)
- * Note: The 0xFF10 command has no input parameters.
- */
-struct ice_aqc_fw_logging {
- u8 log_ctrl;
-#define ICE_AQC_FW_LOG_AQ_EN BIT(0)
-#define ICE_AQC_FW_LOG_UART_EN BIT(1)
- u8 rsvd0;
- u8 log_ctrl_valid; /* Not used by 0xFF10 Response */
-#define ICE_AQC_FW_LOG_AQ_VALID BIT(0)
-#define ICE_AQC_FW_LOG_UART_VALID BIT(1)
- u8 rsvd1[5];
- __le32 addr_high;
- __le32 addr_low;
-};
-
-enum ice_aqc_fw_logging_mod {
- ICE_AQC_FW_LOG_ID_GENERAL = 0,
- ICE_AQC_FW_LOG_ID_CTRL,
- ICE_AQC_FW_LOG_ID_LINK,
- ICE_AQC_FW_LOG_ID_LINK_TOPO,
- ICE_AQC_FW_LOG_ID_DNL,
- ICE_AQC_FW_LOG_ID_I2C,
- ICE_AQC_FW_LOG_ID_SDP,
- ICE_AQC_FW_LOG_ID_MDIO,
- ICE_AQC_FW_LOG_ID_ADMINQ,
- ICE_AQC_FW_LOG_ID_HDMA,
- ICE_AQC_FW_LOG_ID_LLDP,
- ICE_AQC_FW_LOG_ID_DCBX,
- ICE_AQC_FW_LOG_ID_DCB,
- ICE_AQC_FW_LOG_ID_NETPROXY,
- ICE_AQC_FW_LOG_ID_NVM,
- ICE_AQC_FW_LOG_ID_AUTH,
- ICE_AQC_FW_LOG_ID_VPD,
- ICE_AQC_FW_LOG_ID_IOSF,
- ICE_AQC_FW_LOG_ID_PARSER,
- ICE_AQC_FW_LOG_ID_SW,
- ICE_AQC_FW_LOG_ID_SCHEDULER,
- ICE_AQC_FW_LOG_ID_TXQ,
- ICE_AQC_FW_LOG_ID_RSVD,
- ICE_AQC_FW_LOG_ID_POST,
- ICE_AQC_FW_LOG_ID_WATCHDOG,
- ICE_AQC_FW_LOG_ID_TASK_DISPATCH,
- ICE_AQC_FW_LOG_ID_MNG,
- ICE_AQC_FW_LOG_ID_MAX,
-};
-
-/* Defines for both above FW logging command/response buffers */
-#define ICE_AQC_FW_LOG_ID_S 0
-#define ICE_AQC_FW_LOG_ID_M (0xFFF << ICE_AQC_FW_LOG_ID_S)
-
-#define ICE_AQC_FW_LOG_CONF_SUCCESS 0 /* Used by response */
-#define ICE_AQC_FW_LOG_CONF_BAD_INDX BIT(12) /* Used by response */
-
-#define ICE_AQC_FW_LOG_EN_S 12
-#define ICE_AQC_FW_LOG_EN_M (0xF << ICE_AQC_FW_LOG_EN_S)
-#define ICE_AQC_FW_LOG_INFO_EN BIT(12) /* Used by command */
-#define ICE_AQC_FW_LOG_INIT_EN BIT(13) /* Used by command */
-#define ICE_AQC_FW_LOG_FLOW_EN BIT(14) /* Used by command */
-#define ICE_AQC_FW_LOG_ERR_EN BIT(15) /* Used by command */
-
-/* Get/Clear FW Log (indirect 0xFF11) */
-struct ice_aqc_get_clear_fw_log {
- u8 flags;
-#define ICE_AQC_FW_LOG_CLEAR BIT(0)
-#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL BIT(1)
- u8 rsvd1[7];
- __le32 addr_high;
- __le32 addr_low;
-};
-
/* Download Package (indirect 0x0C40) */
/* Also used for Update Package (indirect 0x0C41 and 0x0C42) */
struct ice_aqc_download_pkg {
@@ -2442,8 +2370,6 @@ struct ice_aq_desc {
struct ice_aqc_add_rdma_qset add_rdma_qset;
struct ice_aqc_add_get_update_free_vsi vsi_cmd;
struct ice_aqc_add_update_free_vsi_resp add_update_free_vsi_res;
- struct ice_aqc_fw_logging fw_logging;
- struct ice_aqc_get_clear_fw_log get_clear_fw_log;
struct ice_aqc_download_pkg download_pkg;
struct ice_aqc_set_cgu_input_config set_cgu_input_config;
struct ice_aqc_get_cgu_input_config get_cgu_input_config;
@@ -2651,10 +2577,6 @@ enum ice_adminq_opc {
/* Standalone Commands/Events */
ice_aqc_opc_event_lan_overflow = 0x1001,
-
- /* debug commands */
- ice_aqc_opc_fw_logging = 0xFF09,
- ice_aqc_opc_fw_logging_info = 0xFF10,
};
#endif /* _ICE_ADMINQ_CMD_H_ */
@@ -897,216 +897,6 @@ static void ice_cleanup_fltr_mgmt_struct(struct ice_hw *hw)
devm_kfree(ice_hw_to_dev(hw), sw);
}
-/**
- * ice_get_fw_log_cfg - get FW logging configuration
- * @hw: pointer to the HW struct
- */
-static int ice_get_fw_log_cfg(struct ice_hw *hw)
-{
- struct ice_aq_desc desc;
- __le16 *config;
- int status;
- u16 size;
-
- size = sizeof(*config) * ICE_AQC_FW_LOG_ID_MAX;
- config = kzalloc(size, GFP_KERNEL);
- if (!config)
- return -ENOMEM;
-
- ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging_info);
-
- status = ice_aq_send_cmd(hw, &desc, config, size, NULL);
- if (!status) {
- u16 i;
-
- /* Save FW logging information into the HW structure */
- for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
- u16 v, m, flgs;
-
- v = le16_to_cpu(config[i]);
- m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S;
- flgs = (v & ICE_AQC_FW_LOG_EN_M) >> ICE_AQC_FW_LOG_EN_S;
-
- if (m < ICE_AQC_FW_LOG_ID_MAX)
- hw->fw_log.evnts[m].cur = flgs;
- }
- }
-
- kfree(config);
-
- return status;
-}
-
-/**
- * ice_cfg_fw_log - configure FW logging
- * @hw: pointer to the HW struct
- * @enable: enable certain FW logging events if true, disable all if false
- *
- * This function enables/disables the FW logging via Rx CQ events and a UART
- * port based on predetermined configurations. FW logging via the Rx CQ can be
- * enabled/disabled for individual PF's. However, FW logging via the UART can
- * only be enabled/disabled for all PFs on the same device.
- *
- * To enable overall FW logging, the "cq_en" and "uart_en" enable bits in
- * hw->fw_log need to be set accordingly, e.g. based on user-provided input,
- * before initializing the device.
- *
- * When re/configuring FW logging, callers need to update the "cfg" elements of
- * the hw->fw_log.evnts array with the desired logging event configurations for
- * modules of interest. When disabling FW logging completely, the callers can
- * just pass false in the "enable" parameter. On completion, the function will
- * update the "cur" element of the hw->fw_log.evnts array with the resulting
- * logging event configurations of the modules that are being re/configured. FW
- * logging modules that are not part of a reconfiguration operation retain their
- * previous states.
- *
- * Before resetting the device, it is recommended that the driver disables FW
- * logging before shutting down the control queue. When disabling FW logging
- * ("enable" = false), the latest configurations of FW logging events stored in
- * hw->fw_log.evnts[] are not overridden to allow them to be reconfigured after
- * a device reset.
- *
- * When enabling FW logging to emit log messages via the Rx CQ during the
- * device's initialization phase, a mechanism alternative to interrupt handlers
- * needs to be used to extract FW log messages from the Rx CQ periodically and
- * to prevent the Rx CQ from being full and stalling other types of control
- * messages from FW to SW. Interrupts are typically disabled during the device's
- * initialization phase.
- */
-static int ice_cfg_fw_log(struct ice_hw *hw, bool enable)
-{
- struct ice_aqc_fw_logging *cmd;
- u16 i, chgs = 0, len = 0;
- struct ice_aq_desc desc;
- __le16 *data = NULL;
- u8 actv_evnts = 0;
- void *buf = NULL;
- int status = 0;
-
- if (!hw->fw_log.cq_en && !hw->fw_log.uart_en)
- return 0;
-
- /* Disable FW logging only when the control queue is still responsive */
- if (!enable &&
- (!hw->fw_log.actv_evnts || !ice_check_sq_alive(hw, &hw->adminq)))
- return 0;
-
- /* Get current FW log settings */
- status = ice_get_fw_log_cfg(hw);
- if (status)
- return status;
-
- ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging);
- cmd = &desc.params.fw_logging;
-
- /* Indicate which controls are valid */
- if (hw->fw_log.cq_en)
- cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_AQ_VALID;
-
- if (hw->fw_log.uart_en)
- cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_UART_VALID;
-
- if (enable) {
- /* Fill in an array of entries with FW logging modules and
- * logging events being reconfigured.
- */
- for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
- u16 val;
-
- /* Keep track of enabled event types */
- actv_evnts |= hw->fw_log.evnts[i].cfg;
-
- if (hw->fw_log.evnts[i].cfg == hw->fw_log.evnts[i].cur)
- continue;
-
- if (!data) {
- data = devm_kcalloc(ice_hw_to_dev(hw),
- ICE_AQC_FW_LOG_ID_MAX,
- sizeof(*data),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- }
-
- val = i << ICE_AQC_FW_LOG_ID_S;
- val |= hw->fw_log.evnts[i].cfg << ICE_AQC_FW_LOG_EN_S;
- data[chgs++] = cpu_to_le16(val);
- }
-
- /* Only enable FW logging if at least one module is specified.
- * If FW logging is currently enabled but all modules are not
- * enabled to emit log messages, disable FW logging altogether.
- */
- if (actv_evnts) {
- /* Leave if there is effectively no change */
- if (!chgs)
- goto out;
-
- if (hw->fw_log.cq_en)
- cmd->log_ctrl |= ICE_AQC_FW_LOG_AQ_EN;
-
- if (hw->fw_log.uart_en)
- cmd->log_ctrl |= ICE_AQC_FW_LOG_UART_EN;
-
- buf = data;
- len = sizeof(*data) * chgs;
- desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
- }
- }
-
- status = ice_aq_send_cmd(hw, &desc, buf, len, NULL);
- if (!status) {
- /* Update the current configuration to reflect events enabled.
- * hw->fw_log.cq_en and hw->fw_log.uart_en indicate if the FW
- * logging mode is enabled for the device. They do not reflect
- * actual modules being enabled to emit log messages. So, their
- * values remain unchanged even when all modules are disabled.
- */
- u16 cnt = enable ? chgs : (u16)ICE_AQC_FW_LOG_ID_MAX;
-
- hw->fw_log.actv_evnts = actv_evnts;
- for (i = 0; i < cnt; i++) {
- u16 v, m;
-
- if (!enable) {
- /* When disabling all FW logging events as part
- * of device's de-initialization, the original
- * configurations are retained, and can be used
- * to reconfigure FW logging later if the device
- * is re-initialized.
- */
- hw->fw_log.evnts[i].cur = 0;
- continue;
- }
-
- v = le16_to_cpu(data[i]);
- m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S;
- hw->fw_log.evnts[m].cur = hw->fw_log.evnts[m].cfg;
- }
- }
-
-out:
- devm_kfree(ice_hw_to_dev(hw), data);
-
- return status;
-}
-
-/**
- * ice_output_fw_log
- * @hw: pointer to the HW struct
- * @desc: pointer to the AQ message descriptor
- * @buf: pointer to the buffer accompanying the AQ message
- *
- * Formats a FW Log message and outputs it via the standard driver logs.
- */
-void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf)
-{
- ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg Start ]\n");
- ice_debug_array(hw, ICE_DBG_FW_LOG, 16, 1, (u8 *)buf,
- le16_to_cpu(desc->datalen));
- ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg End ]\n");
-}
-
/**
* ice_get_itr_intrl_gran
* @hw: pointer to the HW struct
@@ -1164,11 +954,6 @@ int ice_init_hw(struct ice_hw *hw)
if (status)
goto err_unroll_cqinit;
- /* Enable FW logging. Not fatal if this fails. */
- status = ice_cfg_fw_log(hw, true);
- if (status)
- ice_debug(hw, ICE_DBG_INIT, "Failed to enable FW logging.\n");
-
status = ice_clear_pf_cfg(hw);
if (status)
goto err_unroll_cqinit;
@@ -1318,8 +1103,6 @@ void ice_deinit_hw(struct ice_hw *hw)
ice_free_hw_tbls(hw);
mutex_destroy(&hw->tnl_lock);
- /* Attempt to disable FW logging before shutting down control queues */
- ice_cfg_fw_log(hw, false);
ice_destroy_all_ctrlq(hw);
/* Clear VSI contexts if not already cleared */
@@ -199,7 +199,6 @@ ice_aq_cfg_lan_txq(struct ice_hw *hw, struct ice_aqc_cfg_txqs_buf *buf,
struct ice_sq_cd *cd);
int ice_replay_vsi(struct ice_hw *hw, u16 vsi_handle);
void ice_replay_post(struct ice_hw *hw);
-void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf);
struct ice_q_ctx *
ice_get_lan_q_ctx(struct ice_hw *hw, u16 vsi_handle, u8 tc, u16 q_handle);
int ice_sbq_rw_reg(struct ice_hw *hw, struct ice_sbq_msg_input *in);
@@ -1531,9 +1531,6 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type)
ice_vc_process_vf_msg(pf, &event, &data);
break;
- case ice_aqc_opc_fw_logging:
- ice_output_fw_log(hw, &event.desc, event.msg_buf);
- break;
case ice_aqc_opc_lldp_set_mib_change:
ice_dcb_process_lldp_set_mib_change(pf, &event);
break;
@@ -729,24 +729,6 @@ struct ice_switch_info {
DECLARE_BITMAP(prof_res_bm[ICE_MAX_NUM_PROFILES], ICE_MAX_FV_WORDS);
};
-/* FW logging configuration */
-struct ice_fw_log_evnt {
- u8 cfg : 4; /* New event enables to configure */
- u8 cur : 4; /* Current/active event enables */
-};
-
-struct ice_fw_log_cfg {
- u8 cq_en : 1; /* FW logging is enabled via the control queue */
- u8 uart_en : 1; /* FW logging is enabled via UART for all PFs */
- u8 actv_evnts; /* Cumulation of currently enabled log events */
-
-#define ICE_FW_LOG_EVNT_INFO (ICE_AQC_FW_LOG_INFO_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_INIT (ICE_AQC_FW_LOG_INIT_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_FLOW (ICE_AQC_FW_LOG_FLOW_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_ERR (ICE_AQC_FW_LOG_ERR_EN >> ICE_AQC_FW_LOG_EN_S)
- struct ice_fw_log_evnt evnts[ICE_AQC_FW_LOG_ID_MAX];
-};
-
/* Enum defining the different states of the mailbox snapshot in the
* PF-VF mailbox overflow detection algorithm. The snapshot can be in
* states:
@@ -888,8 +870,6 @@ struct ice_hw {
u8 fw_patch; /* firmware patch version */
u32 fw_build; /* firmware build number */
- struct ice_fw_log_cfg fw_log;
-
/* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL
* register. Used for determining the ITR/INTRL granularity during
* initialization.