From patchwork Tue Oct 24 13:20:31 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 13434476 X-Patchwork-Delegate: kuba@kernel.org Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5B5F92B5CF for ; Tue, 24 Oct 2023 13:20:43 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="qRE/rY40" Received: from mail-lf1-x12c.google.com (mail-lf1-x12c.google.com [IPv6:2a00:1450:4864:20::12c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4F7C6E9 for ; Tue, 24 Oct 2023 06:20:38 -0700 (PDT) Received: by mail-lf1-x12c.google.com with SMTP id 2adb3069b0e04-507973f3b65so7050954e87.3 for ; Tue, 24 Oct 2023 06:20:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1698153636; x=1698758436; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=IL2ResPg+hiG9clxg6x2c6XDYehjwty0hK+xdAu13LQ=; b=qRE/rY40ztLQzInS7OOexxFW2BVFErCF8B1RCM04fzDTMYEbfuO8r40ou09cJe4HS+ JdGz0BAhTd/GtWj3HjIiLHdJt1KYG3PHaE6kshmLG+lt3GUmuXEADzh2dwa8DnnYN/PV 393xYox7F4eQbJHJ/Z2Y8D9Z+LcvF4YsLjMldprHVXlScVzjx+OBaJotWPHGDCikbYzr lqYC7SPoEbrSFLHfATGqQ6Dr6JZCnNTSRF1t72XS9iV/tf+BexCSeMYEWtzrGwjDuQUN vUgeZ1t0WUmkEW3OhcRDQnk3XtjrXdzDTTcX2k+YSJ7/FNP5qUMp15mTOdPAAGLNC2k0 v2xQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1698153636; x=1698758436; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=IL2ResPg+hiG9clxg6x2c6XDYehjwty0hK+xdAu13LQ=; b=LbeWjI3mVTG9d3EgqQpcFV8nHQ9LsCQyosZ7jDaBk37Pfve8sJNR8uGuDN9CivIfcl /ZWwdtEXUww0/ZVr2ga55yIOxesZ6Ck07CF6MGt+sZZCHhonlaX3xsAkq85IDp6nk2ob vQi7ECDLc4KHB0HR1dPYmbdZk+8BmUGY6GNZoEcbkAgh/+shrY8O5V+vaVhEycOQAo9X D3IFWEn2P1WcaPeCL7lGHlZ1hdAPDv/LWZ7ic5aQCZVpHBNSWTvdWRZtPfMXYHeTN4Up OC5UWrYVitIWgudKdmMXtNsbwZbsTv5drKe/f57F+DRPA/YTj0ByOJ3s/qIkq4M5d+xo DZvg== X-Gm-Message-State: AOJu0Yw5K8IarYBnxrNFp4M4XeafHTcUxnaFVcJHt2+6GXMpcAJ89k3x dv7gExhGi6wCOWqxLLqPEa/vTQ== X-Google-Smtp-Source: AGHT+IHTLgt0w7nTn5CFCPgpHuW2pwFk02eljfwLvvZjbUP6/BzrxV9dvc5WWfLIIuKTMVLjbJSm7g== X-Received: by 2002:ac2:5b12:0:b0:4fa:f96c:745f with SMTP id v18-20020ac25b12000000b004faf96c745fmr7901313lfn.38.1698153636559; Tue, 24 Oct 2023 06:20:36 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id d5-20020a193845000000b00507ab956ab9sm2147365lfj.147.2023.10.24.06.20.35 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Oct 2023 06:20:36 -0700 (PDT) From: Linus Walleij Date: Tue, 24 Oct 2023 15:20:31 +0200 Subject: [PATCH net-next v7 5/7] ARM64: dts: marvell: Fix some common switch mistakes Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231024-marvell-88e6152-wan-led-v7-5-2869347697d1@linaro.org> References: <20231024-marvell-88e6152-wan-led-v7-0-2869347697d1@linaro.org> In-Reply-To: <20231024-marvell-88e6152-wan-led-v7-0-2869347697d1@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.4 X-Patchwork-Delegate: kuba@kernel.org Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - ports should be ethernet-ports - port@0 should be ethernet-port@0 - PHYs should be named ethernet-phy@ Reviewed-by: Andrew Lunn Signed-off-by: Linus Walleij Reviewed-by: Florian Fainelli --- .../dts/marvell/armada-3720-espressobin-ultra.dts | 14 +- .../boot/dts/marvell/armada-3720-espressobin.dtsi | 20 +-- .../boot/dts/marvell/armada-3720-gl-mv1000.dts | 20 +-- .../boot/dts/marvell/armada-3720-turris-mox.dts | 189 +++++++++++---------- .../boot/dts/marvell/armada-7040-mochabin.dts | 24 ++- .../dts/marvell/armada-8040-clearfog-gt-8k.dts | 22 +-- arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 42 +++-- 7 files changed, 164 insertions(+), 167 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index f9abef8dcc94..870bb380a40a 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -126,32 +126,32 @@ &switch0 { reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; - ports { - switch0port1: port@1 { + ethernet-ports { + switch0port1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&switch0phy2>; }; - switch0port4: port@4 { + switch0port4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - switch0port5: port@5 { + switch0port5: ethernet-port@5 { reg = <5>; label = "wan"; phy-handle = <&extphy>; @@ -160,7 +160,7 @@ switch0port5: port@5 { }; mdio { - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 5fc613d24151..86ec0df1c676 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -145,19 +145,17 @@ &usb2 { }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - switch0port0: port@0 { + switch0port0: ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -168,19 +166,19 @@ fixed-link { }; }; - switch0port1: port@1 { + switch0port1: ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -192,13 +190,13 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index b1b45b4fa9d4..63fbc8352161 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -152,31 +152,29 @@ &uart0 { }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports: ports { + ports: ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; @@ -185,7 +183,7 @@ port@2 { nvmem-cell-names = "mac-address"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -199,13 +197,13 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 9eab2bb22134..cdf1b8bdb230 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -304,7 +304,12 @@ phy1: ethernet-phy@1 { reg = <1>; }; - /* switch nodes are enabled by U-Boot if modules are present */ + /* + * NOTE: switch nodes are enabled by U-Boot if modules are present + * DO NOT change this node name (switch0@10) even if it is not following + * conventions! Deployed U-Boot binaries are explicitly looking for + * this node in order to augment the device tree! + */ switch0@10 { compatible = "marvell,mv88e6190"; reg = <0x10>; @@ -317,92 +322,92 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <0x1>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <0x2>; label = "lan2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <0x3>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <0x4>; label = "lan4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <0x5>; label = "lan5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <0x6>; label = "lan6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <0x7>; label = "lan7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <0x8>; label = "lan8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <0x9>; label = "cpu"; ethernet = <ð1>; @@ -410,7 +415,7 @@ port@9 { managed = "in-band-status"; }; - switch0port10: port@a { + switch0port10: ethernet-port@a { reg = <0xa>; label = "dsa"; phy-mode = "2500base-x"; @@ -430,7 +435,7 @@ port-sfp@a { }; }; - switch0@2 { + ethernet-switch@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 0>; @@ -442,52 +447,52 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1_topaz: switch0phy1@11 { + switch0phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch0phy2_topaz: switch0phy2@12 { + switch0phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch0phy3_topaz: switch0phy3@13 { + switch0phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch0phy4_topaz: switch0phy4@14 { + switch0phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <0x1>; label = "lan1"; phy-handle = <&switch0phy1_topaz>; }; - port@2 { + ethernet-port@2 { reg = <0x2>; label = "lan2"; phy-handle = <&switch0phy2_topaz>; }; - port@3 { + ethernet-port@3 { reg = <0x3>; label = "lan3"; phy-handle = <&switch0phy3_topaz>; }; - port@4 { + ethernet-port@4 { reg = <0x4>; label = "lan4"; phy-handle = <&switch0phy4_topaz>; }; - port@5 { + ethernet-port@5 { reg = <0x5>; label = "cpu"; phy-mode = "2500base-x"; @@ -497,7 +502,7 @@ port@5 { }; }; - switch1@11 { + ethernet-switch@11 { compatible = "marvell,mv88e6190"; reg = <0x11>; dsa,member = <0 1>; @@ -509,92 +514,92 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch1phy1: switch1phy1@1 { + switch1phy1: ethernet-phy@1 { reg = <0x1>; }; - switch1phy2: switch1phy2@2 { + switch1phy2: ethernet-phy@2 { reg = <0x2>; }; - switch1phy3: switch1phy3@3 { + switch1phy3: ethernet-phy@3 { reg = <0x3>; }; - switch1phy4: switch1phy4@4 { + switch1phy4: ethernet-phy@4 { reg = <0x4>; }; - switch1phy5: switch1phy5@5 { + switch1phy5: ethernet-phy@5 { reg = <0x5>; }; - switch1phy6: switch1phy6@6 { + switch1phy6: ethernet-phy@6 { reg = <0x6>; }; - switch1phy7: switch1phy7@7 { + switch1phy7: ethernet-phy@7 { reg = <0x7>; }; - switch1phy8: switch1phy8@8 { + switch1phy8: ethernet-phy@8 { reg = <0x8>; }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <0x1>; label = "lan9"; phy-handle = <&switch1phy1>; }; - port@2 { + ethernet-port@2 { reg = <0x2>; label = "lan10"; phy-handle = <&switch1phy2>; }; - port@3 { + ethernet-port@3 { reg = <0x3>; label = "lan11"; phy-handle = <&switch1phy3>; }; - port@4 { + ethernet-port@4 { reg = <0x4>; label = "lan12"; phy-handle = <&switch1phy4>; }; - port@5 { + ethernet-port@5 { reg = <0x5>; label = "lan13"; phy-handle = <&switch1phy5>; }; - port@6 { + ethernet-port@6 { reg = <0x6>; label = "lan14"; phy-handle = <&switch1phy6>; }; - port@7 { + ethernet-port@7 { reg = <0x7>; label = "lan15"; phy-handle = <&switch1phy7>; }; - port@8 { + ethernet-port@8 { reg = <0x8>; label = "lan16"; phy-handle = <&switch1phy8>; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <0x9>; label = "dsa"; phy-mode = "2500base-x"; @@ -602,7 +607,7 @@ switch1port9: port@9 { link = <&switch0port10>; }; - switch1port10: port@a { + switch1port10: ethernet-port@a { reg = <0xa>; label = "dsa"; phy-mode = "2500base-x"; @@ -622,7 +627,7 @@ port-sfp@a { }; }; - switch1@2 { + ethernet-switch@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 1>; @@ -634,52 +639,52 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch1phy1_topaz: switch1phy1@11 { + switch1phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch1phy2_topaz: switch1phy2@12 { + switch1phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch1phy3_topaz: switch1phy3@13 { + switch1phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch1phy4_topaz: switch1phy4@14 { + switch1phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <0x1>; label = "lan9"; phy-handle = <&switch1phy1_topaz>; }; - port@2 { + ethernet-port@2 { reg = <0x2>; label = "lan10"; phy-handle = <&switch1phy2_topaz>; }; - port@3 { + ethernet-port@3 { reg = <0x3>; label = "lan11"; phy-handle = <&switch1phy3_topaz>; }; - port@4 { + ethernet-port@4 { reg = <0x4>; label = "lan12"; phy-handle = <&switch1phy4_topaz>; }; - port@5 { + ethernet-port@5 { reg = <0x5>; label = "dsa"; phy-mode = "2500base-x"; @@ -689,7 +694,7 @@ port@5 { }; }; - switch2@12 { + ethernet-switch@12 { compatible = "marvell,mv88e6190"; reg = <0x12>; dsa,member = <0 2>; @@ -701,92 +706,92 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch2phy1: switch2phy1@1 { + switch2phy1: ethernet-phy@1 { reg = <0x1>; }; - switch2phy2: switch2phy2@2 { + switch2phy2: ethernet-phy@2 { reg = <0x2>; }; - switch2phy3: switch2phy3@3 { + switch2phy3: ethernet-phy@3 { reg = <0x3>; }; - switch2phy4: switch2phy4@4 { + switch2phy4: ethernet-phy@4 { reg = <0x4>; }; - switch2phy5: switch2phy5@5 { + switch2phy5: ethernet-phy@5 { reg = <0x5>; }; - switch2phy6: switch2phy6@6 { + switch2phy6: ethernet-phy@6 { reg = <0x6>; }; - switch2phy7: switch2phy7@7 { + switch2phy7: ethernet-phy@7 { reg = <0x7>; }; - switch2phy8: switch2phy8@8 { + switch2phy8: ethernet-phy@8 { reg = <0x8>; }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <0x1>; label = "lan17"; phy-handle = <&switch2phy1>; }; - port@2 { + ethernet-port@2 { reg = <0x2>; label = "lan18"; phy-handle = <&switch2phy2>; }; - port@3 { + ethernet-port@3 { reg = <0x3>; label = "lan19"; phy-handle = <&switch2phy3>; }; - port@4 { + ethernet-port@4 { reg = <0x4>; label = "lan20"; phy-handle = <&switch2phy4>; }; - port@5 { + ethernet-port@5 { reg = <0x5>; label = "lan21"; phy-handle = <&switch2phy5>; }; - port@6 { + ethernet-port@6 { reg = <0x6>; label = "lan22"; phy-handle = <&switch2phy6>; }; - port@7 { + ethernet-port@7 { reg = <0x7>; label = "lan23"; phy-handle = <&switch2phy7>; }; - port@8 { + ethernet-port@8 { reg = <0x8>; label = "lan24"; phy-handle = <&switch2phy8>; }; - switch2port9: port@9 { + switch2port9: ethernet-port@9 { reg = <0x9>; label = "dsa"; phy-mode = "2500base-x"; @@ -805,7 +810,7 @@ port-sfp@a { }; }; - switch2@2 { + ethernet-switch@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 2>; @@ -817,52 +822,52 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch2phy1_topaz: switch2phy1@11 { + switch2phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch2phy2_topaz: switch2phy2@12 { + switch2phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch2phy3_topaz: switch2phy3@13 { + switch2phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch2phy4_topaz: switch2phy4@14 { + switch2phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <0x1>; label = "lan17"; phy-handle = <&switch2phy1_topaz>; }; - port@2 { + ethernet-port@2 { reg = <0x2>; label = "lan18"; phy-handle = <&switch2phy2_topaz>; }; - port@3 { + ethernet-port@3 { reg = <0x3>; label = "lan19"; phy-handle = <&switch2phy3_topaz>; }; - port@4 { + ethernet-port@4 { reg = <0x4>; label = "lan20"; phy-handle = <&switch2phy4_topaz>; }; - port@5 { + ethernet-port@5 { reg = <0x5>; label = "dsa"; phy-mode = "2500base-x"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 48202810bf78..40b7ee7ead72 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -301,10 +301,8 @@ eth2phy: ethernet-phy@1 { }; /* 88E6141 Topaz switch */ - switch: switch@3 { + switch: ethernet-switch@3 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <3>; pinctrl-names = "default"; @@ -314,35 +312,35 @@ switch: switch@3 { interrupt-parent = <&cp0_gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - swport1: port@1 { + swport1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&swphy1>; }; - swport2: port@2 { + swport2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&swphy2>; }; - swport3: port@3 { + swport3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&swphy3>; }; - swport4: port@4 { + swport4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&swphy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp0_eth1>; @@ -355,19 +353,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - swphy1: swphy1@17 { + swphy1: ethernet-phy@17 { reg = <17>; }; - swphy2: swphy2@18 { + swphy2: ethernet-phy@18 { reg = <18>; }; - swphy3: swphy3@19 { + swphy3: ethernet-phy@19 { reg = <19>; }; - swphy4: swphy4@20 { + swphy4: ethernet-phy@20 { reg = <20>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 4125202028c8..67892f0d2863 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -497,42 +497,42 @@ ge_phy: ethernet-phy@0 { reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -545,19 +545,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 32cfb3e2efc3..7538ed56053b 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -207,11 +207,9 @@ phy0: ethernet-phy@0 { reg = <0>; }; - switch6: switch0@6 { + switch6: ethernet-switch@6 { /* Actual device is MV88E6393X */ compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; reg = <6>; interrupt-parent = <&cp0_gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -220,59 +218,59 @@ switch6: switch0@6 { dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "p1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "p2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "p3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "p4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "p5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "p6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "p7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "p8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "p9"; phy-mode = "10gbase-r"; @@ -280,7 +278,7 @@ port@9 { managed = "in-band-status"; }; - port@a { + ethernet-port@a { reg = <10>; ethernet = <&cp0_eth0>; phy-mode = "10gbase-r"; @@ -293,35 +291,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; };