@@ -232,5 +232,6 @@ int otx2_cpt_attach_rscrs_msg(struct otx2_cptlfs_info *lfs);
int otx2_cpt_detach_rsrcs_msg(struct otx2_cptlfs_info *lfs);
int otx2_cpt_msix_offset_msg(struct otx2_cptlfs_info *lfs);
int otx2_cpt_sync_mbox_msg(struct otx2_mbox *mbox);
+int otx2_cpt_lf_reset_msg(struct otx2_cptlfs_info *lfs, int slot);
#endif /* __OTX2_CPT_COMMON_H */
@@ -229,3 +229,29 @@ int otx2_cpt_sync_mbox_msg(struct otx2_mbox *mbox)
return otx2_mbox_check_rsp_msgs(mbox, 0);
}
EXPORT_SYMBOL_NS_GPL(otx2_cpt_sync_mbox_msg, CRYPTO_DEV_OCTEONTX2_CPT);
+
+int otx2_cpt_lf_reset_msg(struct otx2_cptlfs_info *lfs, int slot)
+{
+ struct otx2_mbox *mbox = lfs->mbox;
+ struct pci_dev *pdev = lfs->pdev;
+ struct cpt_lf_rst_req *req;
+ int ret;
+
+ req = (struct cpt_lf_rst_req *)otx2_mbox_alloc_msg_rsp(mbox, 0, sizeof(*req),
+ sizeof(struct msg_rsp));
+ if (req == NULL) {
+ dev_err(&pdev->dev, "RVU MBOX failed to get message.\n");
+ return -EFAULT;
+ }
+
+ req->hdr.id = MBOX_MSG_CPT_LF_RESET;
+ req->hdr.sig = OTX2_MBOX_REQ_SIG;
+ req->hdr.pcifunc = 0;
+ req->slot = slot;
+ ret = otx2_cpt_send_mbox_msg(mbox, pdev);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+EXPORT_SYMBOL_NS_GPL(otx2_cpt_lf_reset_msg, CRYPTO_DEV_OCTEONTX2_CPT);
@@ -5,6 +5,7 @@
#define __OTX2_CPTLF_H
#include <linux/soc/marvell/octeontx2/asm.h>
+#include <linux/bitfield.h>
#include <mbox.h>
#include <rvu.h>
#include "otx2_cpt_common.h"
@@ -118,6 +119,7 @@ struct otx2_cptlfs_info {
u8 kvf_limits; /* Kernel crypto limits */
atomic_t state; /* LF's state. started/reset */
int blkaddr; /* CPT blkaddr: BLKADDR_CPT0/BLKADDR_CPT1 */
+ int global_slot; /* Global slot across the blocks */
};
static inline void otx2_cpt_free_instruction_queues(
@@ -205,48 +207,71 @@ static inline void otx2_cptlf_set_iqueues_size(struct otx2_cptlfs_info *lfs)
otx2_cptlf_do_set_iqueue_size(&lfs->lf[slot]);
}
+#define INFLIGHT GENMASK_ULL(8, 0)
+#define GRB_CNT GENMASK_ULL(39, 32)
+#define GWB_CNT GENMASK_ULL(47, 40)
+#define XQ_XOR GENMASK_ULL(63, 63)
+#define DQPTR GENMASK_ULL(19, 0)
+#define NQPTR GENMASK_ULL(51, 32)
+
static inline void otx2_cptlf_do_disable_iqueue(struct otx2_cptlf_info *lf)
{
- union otx2_cptx_lf_ctl lf_ctl = { .u = 0x0 };
- union otx2_cptx_lf_inprog lf_inprog;
+ void __iomem *reg_base = lf->lfs->reg_base;
+ struct pci_dev *pdev = lf->lfs->pdev;
u8 blkaddr = lf->lfs->blkaddr;
- int timeout = 20;
+ int timeout = 1000000;
+ u64 inprog, inst_ptr;
+ u64 slot = lf->slot;
+ u64 qsize, pending;
+ int i = 0;
/* Disable instructions enqueuing */
- otx2_cpt_write64(lf->lfs->reg_base, blkaddr, lf->slot,
- OTX2_CPT_LF_CTL, lf_ctl.u);
+ otx2_cpt_write64(reg_base, blkaddr, slot, OTX2_CPT_LF_CTL, 0x0);
- /* Wait for instruction queue to become empty */
+ inprog = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_INPROG);
+ inprog |= BIT_ULL(16);
+ otx2_cpt_write64(reg_base, blkaddr, slot, OTX2_CPT_LF_INPROG, inprog);
+
+ qsize = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_Q_SIZE) & 0x7FFF;
+ do {
+ inst_ptr = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_Q_INST_PTR);
+ pending = (FIELD_GET(XQ_XOR, inst_ptr) * qsize * 40) +
+ FIELD_GET(NQPTR, inst_ptr) - FIELD_GET(DQPTR, inst_ptr);
+ udelay(1);
+ timeout--;
+ } while ((pending != 0) && (timeout != 0));
+
+ if (timeout == 0)
+ dev_warn(&pdev->dev, "TIMEOUT: CPT poll on pending instructions\n");
+
+ timeout = 1000000;
+ /* Wait for CPT queue to become execution-quiescent */
do {
- lf_inprog.u = otx2_cpt_read64(lf->lfs->reg_base, blkaddr,
- lf->slot, OTX2_CPT_LF_INPROG);
- if (!lf_inprog.s.inflight)
- break;
-
- usleep_range(10000, 20000);
- if (timeout-- < 0) {
- dev_err(&lf->lfs->pdev->dev,
- "Error LF %d is still busy.\n", lf->slot);
- break;
+ inprog = otx2_cpt_read64(reg_base, blkaddr, slot, OTX2_CPT_LF_INPROG);
+
+ if ((FIELD_GET(INFLIGHT, inprog) == 0) &&
+ (FIELD_GET(GRB_CNT, inprog) == 0)) {
+ i++;
+ } else {
+ i = 0;
+ timeout--;
}
+ } while ((timeout != 0) && (i < 10));
- } while (1);
-
- /*
- * Disable executions in the LF's queue,
- * the queue should be empty at this point
- */
- lf_inprog.s.eena = 0x0;
- otx2_cpt_write64(lf->lfs->reg_base, blkaddr, lf->slot,
- OTX2_CPT_LF_INPROG, lf_inprog.u);
+ if (timeout == 0)
+ dev_warn(&pdev->dev, "TIMEOUT: CPT poll on inflight count\n");
+ /* Wait for 2 us to flush all queue writes to memory */
+ udelay(2);
}
static inline void otx2_cptlf_disable_iqueues(struct otx2_cptlfs_info *lfs)
{
int slot;
- for (slot = 0; slot < lfs->lfs_num; slot++)
+ for (slot = 0; slot < lfs->lfs_num; slot++) {
otx2_cptlf_do_disable_iqueue(&lfs->lf[slot]);
+ otx2_cpt_lf_reset_msg(lfs, lfs->global_slot + slot);
+ }
}
static inline void otx2_cptlf_set_iqueue_enq(struct otx2_cptlf_info *lf,
@@ -201,8 +201,8 @@ static int handle_msg_rx_inline_ipsec_lf_cfg(struct otx2_cptpf_dev *cptpf,
struct mbox_msghdr *req)
{
struct otx2_cpt_rx_inline_lf_cfg *cfg_req;
+ int num_lfs = 1, ret;
u8 egrp;
- int ret;
cfg_req = (struct otx2_cpt_rx_inline_lf_cfg *)req;
if (cptpf->lfs.lfs_num) {
@@ -223,8 +223,9 @@ static int handle_msg_rx_inline_ipsec_lf_cfg(struct otx2_cptpf_dev *cptpf,
otx2_cptlf_set_dev_info(&cptpf->lfs, cptpf->pdev, cptpf->reg_base,
&cptpf->afpf_mbox, BLKADDR_CPT0);
+ cptpf->lfs.global_slot = 0;
ret = otx2_cptlf_init(&cptpf->lfs, 1 << egrp, OTX2_CPT_QUEUE_HI_PRIO,
- 1);
+ num_lfs);
if (ret) {
dev_err(&cptpf->pdev->dev,
"LF configuration failed for RX inline ipsec.\n");
@@ -236,8 +237,9 @@ static int handle_msg_rx_inline_ipsec_lf_cfg(struct otx2_cptpf_dev *cptpf,
otx2_cptlf_set_dev_info(&cptpf->cpt1_lfs, cptpf->pdev,
cptpf->reg_base, &cptpf->afpf_mbox,
BLKADDR_CPT1);
+ cptpf->cpt1_lfs.global_slot = num_lfs;
ret = otx2_cptlf_init(&cptpf->cpt1_lfs, 1 << egrp,
- OTX2_CPT_QUEUE_HI_PRIO, 1);
+ OTX2_CPT_QUEUE_HI_PRIO, num_lfs);
if (ret) {
dev_err(&cptpf->pdev->dev,
"LF configuration failed for RX inline ipsec.\n");
@@ -449,6 +451,7 @@ static void process_afpf_mbox_msg(struct otx2_cptpf_dev *cptpf,
break;
case MBOX_MSG_CPT_INLINE_IPSEC_CFG:
case MBOX_MSG_NIX_INLINE_IPSEC_CFG:
+ case MBOX_MSG_CPT_LF_RESET:
break;
default:
@@ -132,6 +132,8 @@ static void process_pfvf_mbox_mbox_msg(struct otx2_cptvf_dev *cptvf,
eng_caps = (struct otx2_cpt_caps_rsp *) msg;
memcpy(cptvf->eng_caps, eng_caps->eng_caps, sizeof(cptvf->eng_caps));
break;
+ case MBOX_MSG_CPT_LF_RESET:
+ break;
default:
dev_err(&cptvf->pdev->dev, "Unsupported msg %d received.\n",
msg->id);
CPT LF must be reset and follow CPT LF disable sequence suggested by HW team, when driver exits. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> --- .../marvell/octeontx2/otx2_cpt_common.h | 1 + .../marvell/octeontx2/otx2_cpt_mbox_common.c | 26 +++++++ drivers/crypto/marvell/octeontx2/otx2_cptlf.h | 77 ++++++++++++------- .../marvell/octeontx2/otx2_cptpf_mbox.c | 9 ++- .../marvell/octeontx2/otx2_cptvf_mbox.c | 2 + 5 files changed, 86 insertions(+), 29 deletions(-)