@@ -165,6 +165,61 @@ on a bridge is disabled by default. After enabling VLAN filtering on a bridge,
it will start forwarding frames to appropriate destinations based on their
destination MAC address and VLAN tag (both must match).
+Multicast
+=========
+
+The Linux bridge driver has multicast support allowing it to process Internet
+Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD)
+messages, and to efficiently forward multicast data packets. The bridge
+driver support IGMPv2/IGMPv3 and MLDv1/MLDv2.
+
+Multicast snooping
+------------------
+
+Multicast snooping is a networking technology that allows network switches
+to intelligently manage multicast traffic within a local area network (LAN).
+
+The switch maintains a multicast group table, which records the association
+between multicast group addresses and the ports where hosts have joined these
+groups. The group table is dynamically updated based on the IGMP/MLD messages
+received. With the multicast group information gathered through snooping, the
+switch optimizes the forwarding of multicast traffic. Instead of blindly
+broadcasting the multicast traffic to all ports, it sends the multicast
+traffic based on the destination MAC address only to ports which have joined
+the respective destination multicast group.
+
+When created, the Linux bridge devices have multicast snooping enabled by
+default. It maintains a Multicast forwarding database (MDB) which keeps track
+of port and group relationships.
+
+IGMPv3/MLDv2 EHT support
+------------------------
+
+The Linux bridge supports IGMPv3/MLDv2 EHT (Explicit Host Tracking), which
+was added by `474ddb37fa3a ("net: bridge: multicast: add EHT allow/block handling")
+<https://lore.kernel.org/netdev/20210120145203.1109140-1-razor@blackwall.org/>`_
+
+The explicit host tracking enables the device to keep track of each
+individual host that is joined to a particular group or channel. The main
+benefit of the explicit host tracking in IGMP is to allow minimal leave
+latencies when a host leaves a multicast group or channel.
+
+The length of time between a host wanting to leave and a device stopping
+traffic forwarding is called the IGMP leave latency. A device configured
+with IGMPv3 or MLDv2 and explicit tracking can immediately stop forwarding
+traffic if the last host to request to receive traffic from the device
+indicates that it no longer wants to receive traffic. The leave latency
+is thus bound only by the packet transmission latencies in the multiaccess
+network and the processing time in the device.
+
+Other multicast features
+------------------------
+The Linux bridge also supports `per-VLAN multicast snooping
+<https://lore.kernel.org/netdev/20210719170637.435541-1-razor@blackwall.org/>`_,
+which is disabled by default but can be enabled. And `Multicast Router Discovery
+<https://lore.kernel.org/netdev/20190121062628.2710-1-linus.luessing@c0d3.blue/>`_,
+which help identify the location of multicast routers.
+
FAQ
===
Add multicast part for bridge document. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> --- Documentation/networking/bridge.rst | 55 +++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)