diff mbox series

[net-next,26/38] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace

Message ID 20231124092736.3673263-27-liuhangbin@gmail.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Conver all net selftests to run in unique namespace | expand

Checks

Context Check Description
netdev/series_format fail Series longer than 15 patches (and no cover letter)
netdev/codegen success Generated files up to date
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 8 this patch: 8
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 8 this patch: 8
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success net selftest script(s) already in Makefile
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 8 this patch: 8
netdev/checkpatch warning WARNING: line length of 160 exceeds 80 columns WARNING: line length of 162 exceeds 80 columns WARNING: line length of 177 exceeds 80 columns WARNING: line length of 178 exceeds 80 columns WARNING: line length of 82 exceeds 80 columns WARNING: line length of 83 exceeds 80 columns WARNING: line length of 84 exceeds 80 columns WARNING: line length of 85 exceeds 80 columns WARNING: line length of 86 exceeds 80 columns WARNING: line length of 87 exceeds 80 columns WARNING: line length of 88 exceeds 80 columns WARNING: line length of 89 exceeds 80 columns WARNING: line length of 91 exceeds 80 columns WARNING: line length of 92 exceeds 80 columns WARNING: line length of 93 exceeds 80 columns WARNING: line length of 94 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Hangbin Liu Nov. 24, 2023, 9:27 a.m. UTC
Here is the test result after conversion.

]# ./test_bridge_neigh_suppress.sh
declare -- sip="192.0.2.1"
declare -- tip="192.0.2.2"
declare -- vid="10"

Per-port ARP suppression - VLAN 10
----------------------------------
TEST: arping                                                        [ OK ]
TEST: ARP suppression                                               [ OK ]

...

TEST: NS suppression (VLAN 20)                                      [ OK ]

Tests passed: 148
Tests failed:   0

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 .../net/test_bridge_neigh_suppress.sh         | 333 +++++++++---------
 1 file changed, 163 insertions(+), 170 deletions(-)
diff mbox series

Patch

diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh
index d80f2cd87614..cd8629b476e2 100755
--- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh
+++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh
@@ -45,9 +45,8 @@ 
 # | sw1                                | | sw2                                |
 # +------------------------------------+ +------------------------------------+
 
+source lib.sh
 ret=0
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
 
 # All tests in this script. Can be overridden with -t option.
 TESTS="
@@ -140,9 +139,6 @@  setup_topo_ns()
 {
 	local ns=$1; shift
 
-	ip netns add $ns
-	ip -n $ns link set dev lo up
-
 	ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
 	ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
 	ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
@@ -153,21 +149,22 @@  setup_topo()
 {
 	local ns
 
-	for ns in h1 h2 sw1 sw2; do
+	setup_ns h1 h2 sw1 sw2
+	for ns in $h1 $h2 $sw1 $sw2; do
 		setup_topo_ns $ns
 	done
 
 	ip link add name veth0 type veth peer name veth1
-	ip link set dev veth0 netns h1 name eth0
-	ip link set dev veth1 netns sw1 name swp1
+	ip link set dev veth0 netns $h1 name eth0
+	ip link set dev veth1 netns $sw1 name swp1
 
 	ip link add name veth0 type veth peer name veth1
-	ip link set dev veth0 netns sw1 name veth0
-	ip link set dev veth1 netns sw2 name veth0
+	ip link set dev veth0 netns $sw1 name veth0
+	ip link set dev veth1 netns $sw2 name veth0
 
 	ip link add name veth0 type veth peer name veth1
-	ip link set dev veth0 netns h2 name eth0
-	ip link set dev veth1 netns sw2 name swp1
+	ip link set dev veth0 netns $h2 name eth0
+	ip link set dev veth1 netns $sw2 name swp1
 }
 
 setup_host_common()
@@ -291,11 +288,7 @@  setup()
 
 cleanup()
 {
-	local ns
-
-	for ns in h1 h2 sw1 sw2; do
-		ip netns del $ns &> /dev/null
-	done
+	cleanup_ns $h1 $h2 $sw1 $sw2
 }
 
 ################################################################################
@@ -312,80 +305,80 @@  neigh_suppress_arp_common()
 	echo "Per-port ARP suppression - VLAN $vid"
 	echo "----------------------------------"
 
-	run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
-	run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
+	run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+	run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
 
 	# Initial state - check that ARP requests are not suppressed and that
 	# ARP replies are received.
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 0 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "ARP suppression"
 
 	# Enable neighbor suppression and check that nothing changes compared
 	# to the initial state.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 0 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 2
+	tc_check_packets $sw1 "dev vx0 egress" 101 2
 	log_test $? 0 "ARP suppression"
 
 	# Install an FDB entry for the remote host and check that nothing
 	# changes compared to the initial state.
-	h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
-	run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
+	h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
+	run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
 	log_test $? 0 "FDB entry installation"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 0 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 3
+	tc_check_packets $sw1 "dev vx0 egress" 101 3
 	log_test $? 0 "ARP suppression"
 
 	# Install a neighbor on the matching SVI interface and check that ARP
 	# requests are suppressed.
-	run_cmd "ip -n sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
+	run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
 	log_test $? 0 "Neighbor entry installation"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 0 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 3
+	tc_check_packets $sw1 "dev vx0 egress" 101 3
 	log_test $? 0 "ARP suppression"
 
 	# Take the second host down and check that ARP requests are suppressed
 	# and that ARP replies are received.
-	run_cmd "ip -n h2 link set dev eth0.$vid down"
+	run_cmd "ip -n $h2 link set dev eth0.$vid down"
 	log_test $? 0 "H2 down"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 0 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 3
+	tc_check_packets $sw1 "dev vx0 egress" 101 3
 	log_test $? 0 "ARP suppression"
 
-	run_cmd "ip -n h2 link set dev eth0.$vid up"
+	run_cmd "ip -n $h2 link set dev eth0.$vid up"
 	log_test $? 0 "H2 up"
 
 	# Disable neighbor suppression and check that ARP requests are no
 	# longer suppressed.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 0 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 4
+	tc_check_packets $sw1 "dev vx0 egress" 101 4
 	log_test $? 0 "ARP suppression"
 
 	# Take the second host down and check that ARP requests are not
 	# suppressed and that ARP replies are not received.
-	run_cmd "ip -n h2 link set dev eth0.$vid down"
+	run_cmd "ip -n $h2 link set dev eth0.$vid down"
 	log_test $? 0 "H2 down"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
 	log_test $? 1 "arping"
-	tc_check_packets sw1 "dev vx0 egress" 101 5
+	tc_check_packets $sw1 "dev vx0 egress" 101 5
 	log_test $? 0 "ARP suppression"
 }
 
@@ -409,86 +402,86 @@  neigh_suppress_ns_common()
 	local saddr=$1; shift
 	local daddr=$1; shift
 	local maddr=$1; shift
-	local h2_mac
+	local $h2_mac
 
 	echo
 	echo "Per-port NS suppression - VLAN $vid"
 	echo "---------------------------------"
 
-	run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
-	run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
+	run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+	run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
 
 	# Initial state - check that NS messages are not suppressed and that ND
 	# messages are received.
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 0 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "NS suppression"
 
 	# Enable neighbor suppression and check that nothing changes compared
 	# to the initial state.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 0 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 2
+	tc_check_packets $sw1 "dev vx0 egress" 101 2
 	log_test $? 0 "NS suppression"
 
 	# Install an FDB entry for the remote host and check that nothing
 	# changes compared to the initial state.
-	h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
-	run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
+	h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
+	run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
 	log_test $? 0 "FDB entry installation"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 0 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 3
+	tc_check_packets $sw1 "dev vx0 egress" 101 3
 	log_test $? 0 "NS suppression"
 
 	# Install a neighbor on the matching SVI interface and check that NS
 	# messages are suppressed.
-	run_cmd "ip -n sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
+	run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
 	log_test $? 0 "Neighbor entry installation"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 0 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 3
+	tc_check_packets $sw1 "dev vx0 egress" 101 3
 	log_test $? 0 "NS suppression"
 
 	# Take the second host down and check that NS messages are suppressed
 	# and that ND messages are received.
-	run_cmd "ip -n h2 link set dev eth0.$vid down"
+	run_cmd "ip -n $h2 link set dev eth0.$vid down"
 	log_test $? 0 "H2 down"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 0 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 3
+	tc_check_packets $sw1 "dev vx0 egress" 101 3
 	log_test $? 0 "NS suppression"
 
-	run_cmd "ip -n h2 link set dev eth0.$vid up"
+	run_cmd "ip -n $h2 link set dev eth0.$vid up"
 	log_test $? 0 "H2 up"
 
 	# Disable neighbor suppression and check that NS messages are no longer
 	# suppressed.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 0 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 4
+	tc_check_packets $sw1 "dev vx0 egress" 101 4
 	log_test $? 0 "NS suppression"
 
 	# Take the second host down and check that NS messages are not
 	# suppressed and that ND messages are not received.
-	run_cmd "ip -n h2 link set dev eth0.$vid down"
+	run_cmd "ip -n $h2 link set dev eth0.$vid down"
 	log_test $? 0 "H2 down"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
 	log_test $? 2 "ndisc6"
-	tc_check_packets sw1 "dev vx0 egress" 101 5
+	tc_check_packets $sw1 "dev vx0 egress" 101 5
 	log_test $? 0 "NS suppression"
 }
 
@@ -517,125 +510,125 @@  neigh_vlan_suppress_arp()
 	local sip2=192.0.2.17
 	local tip1=192.0.2.2
 	local tip2=192.0.2.18
-	local h2_mac1
-	local h2_mac2
+	local $h2_mac1
+	local $h2_mac2
 
 	echo
 	echo "Per-{Port, VLAN} ARP suppression"
 	echo "--------------------------------"
 
-	run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
-	run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
-	run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
+	run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+	run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
+	run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
 
-	h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
-	h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
-	run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
-	run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
-	run_cmd "ip -n sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
-	run_cmd "ip -n sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
+	h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
+	h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
+	run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
+	run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
+	run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
+	run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
 
 	# Enable per-{Port, VLAN} neighbor suppression and check that ARP
 	# requests are not suppressed and that ARP replies are received.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
 	log_test $? 0 "\"neigh_vlan_suppress\" is on"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
 	log_test $? 0 "arping (VLAN $vid1)"
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
 	log_test $? 0 "arping (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "ARP suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 1
+	tc_check_packets $sw1 "dev vx0 egress" 102 1
 	log_test $? 0 "ARP suppression (VLAN $vid2)"
 
 	# Enable neighbor suppression on VLAN 10 and check that only on this
 	# VLAN ARP requests are suppressed.
-	run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
-	run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
 	log_test $? 0 "arping (VLAN $vid1)"
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
 	log_test $? 0 "arping (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "ARP suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 2
+	tc_check_packets $sw1 "dev vx0 egress" 102 2
 	log_test $? 0 "ARP suppression (VLAN $vid2)"
 
 	# Enable neighbor suppression on the port and check that it has no
 	# effect compared to previous state.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
 	log_test $? 0 "arping (VLAN $vid1)"
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
 	log_test $? 0 "arping (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "ARP suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 3
+	tc_check_packets $sw1 "dev vx0 egress" 102 3
 	log_test $? 0 "ARP suppression (VLAN $vid2)"
 
 	# Disable neighbor suppression on the port and check that it has no
 	# effect compared to previous state.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
 	log_test $? 0 "arping (VLAN $vid1)"
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
 	log_test $? 0 "arping (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "ARP suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 4
+	tc_check_packets $sw1 "dev vx0 egress" 102 4
 	log_test $? 0 "ARP suppression (VLAN $vid2)"
 
 	# Disable neighbor suppression on VLAN 10 and check that ARP requests
 	# are no longer suppressed on this VLAN.
-	run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
-	run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
+	run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
 	log_test $? 0 "arping (VLAN $vid1)"
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
 	log_test $? 0 "arping (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 2
+	tc_check_packets $sw1 "dev vx0 egress" 101 2
 	log_test $? 0 "ARP suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 5
+	tc_check_packets $sw1 "dev vx0 egress" 102 5
 	log_test $? 0 "ARP suppression (VLAN $vid2)"
 
 	# Disable per-{Port, VLAN} neighbor suppression, enable neighbor
 	# suppression on the port and check that on both VLANs ARP requests are
 	# suppressed.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
 	log_test $? 0 "\"neigh_vlan_suppress\" is off"
 
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on"
 
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
 	log_test $? 0 "arping (VLAN $vid1)"
-	run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+	run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
 	log_test $? 0 "arping (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 2
+	tc_check_packets $sw1 "dev vx0 egress" 101 2
 	log_test $? 0 "ARP suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 5
+	tc_check_packets $sw1 "dev vx0 egress" 102 5
 	log_test $? 0 "ARP suppression (VLAN $vid2)"
 }
 
@@ -648,125 +641,125 @@  neigh_vlan_suppress_ns()
 	local daddr1=2001:db8:1::2
 	local daddr2=2001:db8:2::2
 	local maddr=ff02::1:ff00:2
-	local h2_mac1
-	local h2_mac2
+	local $h2_mac1
+	local $h2_mac2
 
 	echo
 	echo "Per-{Port, VLAN} NS suppression"
 	echo "-------------------------------"
 
-	run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
-	run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
-	run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
+	run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+	run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
+	run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
 
-	h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
-	h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
-	run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
-	run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
-	run_cmd "ip -n sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
-	run_cmd "ip -n sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
+	h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
+	h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
+	run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
+	run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
+	run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
+	run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
 
 	# Enable per-{Port, VLAN} neighbor suppression and check that NS
 	# messages are not suppressed and that ND messages are received.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
 	log_test $? 0 "\"neigh_vlan_suppress\" is on"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
 	log_test $? 0 "ndisc6 (VLAN $vid1)"
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
 	log_test $? 0 "ndisc6 (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "NS suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 1
+	tc_check_packets $sw1 "dev vx0 egress" 102 1
 	log_test $? 0 "NS suppression (VLAN $vid2)"
 
 	# Enable neighbor suppression on VLAN 10 and check that only on this
 	# VLAN NS messages are suppressed.
-	run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
-	run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
 	log_test $? 0 "ndisc6 (VLAN $vid1)"
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
 	log_test $? 0 "ndisc6 (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "NS suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 2
+	tc_check_packets $sw1 "dev vx0 egress" 102 2
 	log_test $? 0 "NS suppression (VLAN $vid2)"
 
 	# Enable neighbor suppression on the port and check that it has no
 	# effect compared to previous state.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
 	log_test $? 0 "ndisc6 (VLAN $vid1)"
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
 	log_test $? 0 "ndisc6 (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "NS suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 3
+	tc_check_packets $sw1 "dev vx0 egress" 102 3
 	log_test $? 0 "NS suppression (VLAN $vid2)"
 
 	# Disable neighbor suppression on the port and check that it has no
 	# effect compared to previous state.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
 	log_test $? 0 "ndisc6 (VLAN $vid1)"
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
 	log_test $? 0 "ndisc6 (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 1
+	tc_check_packets $sw1 "dev vx0 egress" 101 1
 	log_test $? 0 "NS suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 4
+	tc_check_packets $sw1 "dev vx0 egress" 102 4
 	log_test $? 0 "NS suppression (VLAN $vid2)"
 
 	# Disable neighbor suppression on VLAN 10 and check that NS messages
 	# are no longer suppressed on this VLAN.
-	run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
-	run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
+	run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
+	run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
 	log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
 	log_test $? 0 "ndisc6 (VLAN $vid1)"
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
 	log_test $? 0 "ndisc6 (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 2
+	tc_check_packets $sw1 "dev vx0 egress" 101 2
 	log_test $? 0 "NS suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 5
+	tc_check_packets $sw1 "dev vx0 egress" 102 5
 	log_test $? 0 "NS suppression (VLAN $vid2)"
 
 	# Disable per-{Port, VLAN} neighbor suppression, enable neighbor
 	# suppression on the port and check that on both VLANs NS messages are
 	# suppressed.
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
 	log_test $? 0 "\"neigh_vlan_suppress\" is off"
 
-	run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
-	run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+	run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+	run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
 	log_test $? 0 "\"neigh_suppress\" is on"
 
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
 	log_test $? 0 "ndisc6 (VLAN $vid1)"
-	run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+	run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
 	log_test $? 0 "ndisc6 (VLAN $vid2)"
 
-	tc_check_packets sw1 "dev vx0 egress" 101 2
+	tc_check_packets $sw1 "dev vx0 egress" 101 2
 	log_test $? 0 "NS suppression (VLAN $vid1)"
-	tc_check_packets sw1 "dev vx0 egress" 102 5
+	tc_check_packets $sw1 "dev vx0 egress" 102 5
 	log_test $? 0 "NS suppression (VLAN $vid2)"
 }