@@ -19,6 +19,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "armada-xp-mv78230.dtsi"
/ {
@@ -278,26 +279,91 @@ ports {
port@0 {
reg = <0>;
label = "lan4";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ label = "front";
+ default-state = "keep";
+ };
+ };
};
port@1 {
reg = <1>;
label = "lan3";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ label = "front";
+ default-state = "keep";
+ };
+ };
};
port@2 {
reg = <2>;
label = "lan2";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ label = "front";
+ default-state = "keep";
+ };
+ };
};
port@3 {
reg = <3>;
label = "lan1";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ label = "front";
+ default-state = "keep";
+ };
+ };
};
port@4 {
reg = <4>;
label = "internet";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_LAN;
+ label = "front";
+ default-state = "keep";
+ };
+ };
};
port@5 {
List the front panel Ethernet LEDs in the switch section of the device tree. They can then be controlled via /sys/class/led/ The node contains a label property to influence the name of the LED. Without it, all the LEDs get the name lan:white, which classes, and so some get a number appended. lan:white_1, lan:white_2, etc. Using the label the LEDs are named lan1:front, lan2:front, lan3:front, where lanX indicates the interface name, and front indicates they are on the front of the box. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- .../dts/marvell/armada-xp-linksys-mamba.dts | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+)