diff mbox series

[V2,2/3] qca_debug: Fix ethtool -G iface tx behavior

Message ID 20231129095241.31302-3-wahrenst@gmx.net (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series qca_spi: collection of major fixes | expand

Checks

Context Check Description
netdev/series_format warning Target tree name not specified in the subject
netdev/codegen success Generated files up to date
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1115 this patch: 1115
netdev/cc_maintainers warning 3 maintainers not CCed: broonie@kernel.org michal.simek@amd.com amit.kumar-mahapatra@amd.com
netdev/build_clang success Errors and warnings before: 1142 this patch: 1142
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 1142 this patch: 1142
netdev/checkpatch warning CHECK: Unnecessary parentheses around 'ring->rx_jumbo_pending' CHECK: Unnecessary parentheses around 'ring->rx_mini_pending'
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Stefan Wahren Nov. 29, 2023, 9:52 a.m. UTC 
After calling ethtool -g it was not possible to adjust the TX ring
size again:

  # ethtool -g eth1
  Ring parameters for eth1:
  Pre-set maximums:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  Current hardware settings:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  # ethtool -G eth1 tx 8
  netlink error: Invalid argument

The reason for this is that the readonly setting rx_pending get
initialized and after that the range check in qcaspi_set_ringparam()
fails regardless of the provided parameter. So fix this by accepting
the exposed RX defaults. Instead of adding another magic number
better use a new define here.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/net/ethernet/qualcomm/qca_debug.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--
2.34.1
diff mbox series

Patch

diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index 9777dbb17ac2..c84a1271857e 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -30,6 +30,8 @@ 

 #define QCASPI_MAX_REGS 0x20

+#define QCASPI_RX_MAX_FRAMES 4
+
 static const u16 qcaspi_spi_regs[] = {
 	SPI_REG_BFR_SIZE,
 	SPI_REG_WRBUF_SPC_AVA,
@@ -252,9 +254,9 @@  qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 {
 	struct qcaspi *qca = netdev_priv(dev);

-	ring->rx_max_pending = 4;
+	ring->rx_max_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_max_pending = TX_RING_MAX_LEN;
-	ring->rx_pending = 4;
+	ring->rx_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_pending = qca->txr.count;
 }

@@ -266,7 +268,7 @@  qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring,
 	struct qcaspi *qca = netdev_priv(dev);
 	bool queue_active = !netif_queue_stopped(dev);

-	if ((ring->rx_pending) ||
+	if (ring->rx_pending != QCASPI_RX_MAX_FRAMES ||
 	    (ring->rx_mini_pending) ||
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;