diff mbox series

[PATCHv2,net-next,11/14] selftests/net: convert l2tp.sh to run it in unique namespace

Message ID 20231130040105.1265779-12-liuhangbin@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Conver net selftests to run in unique namespace (Part 1) | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 8 this patch: 8
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 8 this patch: 8
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success net selftest script(s) already in Makefile
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 8 this patch: 8
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 284 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Hangbin Liu Nov. 30, 2023, 4:01 a.m. UTC
Here is the test result after conversion.

]# ./l2tp.sh
TEST: IPv4 basic L2TP tunnel                                        [ OK ]
TEST: IPv4 route through L2TP tunnel                                [ OK ]
TEST: IPv6 basic L2TP tunnel                                        [ OK ]
TEST: IPv6 route through L2TP tunnel                                [ OK ]
TEST: IPv4 basic L2TP tunnel - with IPsec                           [ OK ]
TEST: IPv4 route through L2TP tunnel - with IPsec                   [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec                           [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec                   [ OK ]
TEST: IPv4 basic L2TP tunnel                                        [ OK ]
TEST: IPv4 route through L2TP tunnel                                [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec                           [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec                   [ OK ]
TEST: IPv4 basic L2TP tunnel - after IPsec teardown                 [ OK ]
TEST: IPv4 route through L2TP tunnel - after IPsec teardown         [ OK ]
TEST: IPv6 basic L2TP tunnel - after IPsec teardown                 [ OK ]
TEST: IPv6 route through L2TP tunnel - after IPsec teardown         [ OK ]

Tests passed:  16
Tests failed:   0

Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 tools/testing/selftests/net/l2tp.sh | 130 +++++++++++++---------------
 1 file changed, 62 insertions(+), 68 deletions(-)

Comments

James Chapman Nov. 30, 2023, 9:34 a.m. UTC | #1
On 30/11/2023 04:01, Hangbin Liu wrote:
> Here is the test result after conversion.
>
> ]# ./l2tp.sh
> TEST: IPv4 basic L2TP tunnel                                        [ OK ]
> TEST: IPv4 route through L2TP tunnel                                [ OK ]
> TEST: IPv6 basic L2TP tunnel                                        [ OK ]
> TEST: IPv6 route through L2TP tunnel                                [ OK ]
> TEST: IPv4 basic L2TP tunnel - with IPsec                           [ OK ]
> TEST: IPv4 route through L2TP tunnel - with IPsec                   [ OK ]
> TEST: IPv6 basic L2TP tunnel - with IPsec                           [ OK ]
> TEST: IPv6 route through L2TP tunnel - with IPsec                   [ OK ]
> TEST: IPv4 basic L2TP tunnel                                        [ OK ]
> TEST: IPv4 route through L2TP tunnel                                [ OK ]
> TEST: IPv6 basic L2TP tunnel - with IPsec                           [ OK ]
> TEST: IPv6 route through L2TP tunnel - with IPsec                   [ OK ]
> TEST: IPv4 basic L2TP tunnel - after IPsec teardown                 [ OK ]
> TEST: IPv4 route through L2TP tunnel - after IPsec teardown         [ OK ]
> TEST: IPv6 basic L2TP tunnel - after IPsec teardown                 [ OK ]
> TEST: IPv6 route through L2TP tunnel - after IPsec teardown         [ OK ]
>
> Tests passed:  16
> Tests failed:   0
>
> Acked-by: David Ahern <dsahern@kernel.org>
> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>

Reviewed-by: James Chapman <jchapman@katalix.com>
diff mbox series

Patch

diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh
index 5782433886fc..88de7166c8ae 100755
--- a/tools/testing/selftests/net/l2tp.sh
+++ b/tools/testing/selftests/net/l2tp.sh
@@ -13,6 +13,7 @@ 
 #                10.1.1.1    |            |   10.1.2.1
 #              2001:db8:1::1 |            | 2001:db8:2::1
 
+source lib.sh
 VERBOSE=0
 PAUSE_ON_FAIL=no
 
@@ -80,9 +81,6 @@  create_ns()
 	[ -z "${addr}" ] && addr="-"
 	[ -z "${addr6}" ] && addr6="-"
 
-	ip netns add ${ns}
-
-	ip -netns ${ns} link set lo up
 	if [ "${addr}" != "-" ]; then
 		ip -netns ${ns} addr add dev lo ${addr}
 	fi
@@ -133,12 +131,7 @@  connect_ns()
 
 cleanup()
 {
-	local ns
-
-	for ns in host-1 host-2 router
-	do
-		ip netns del ${ns} 2>/dev/null
-	done
+	cleanup_ns $host_1 $host_2 $router
 }
 
 setup_l2tp_ipv4()
@@ -146,28 +139,28 @@  setup_l2tp_ipv4()
 	#
 	# configure l2tpv3 tunnel on host-1
 	#
-	ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \
+	ip -netns $host_1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \
 			 encap ip local 10.1.1.1 remote 10.1.2.1
-	ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \
+	ip -netns $host_1 l2tp add session name l2tp4 tunnel_id 1041 \
 			 session_id 1041 peer_session_id 1042
-	ip -netns host-1 link set dev l2tp4 up
-	ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
+	ip -netns $host_1 link set dev l2tp4 up
+	ip -netns $host_1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
 
 	#
 	# configure l2tpv3 tunnel on host-2
 	#
-	ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \
+	ip -netns $host_2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \
 			 encap ip local 10.1.2.1 remote 10.1.1.1
-	ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \
+	ip -netns $host_2 l2tp add session name l2tp4 tunnel_id 1042 \
 			 session_id 1042 peer_session_id 1041
-	ip -netns host-2 link set dev l2tp4 up
-	ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
+	ip -netns $host_2 link set dev l2tp4 up
+	ip -netns $host_2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
 
 	#
 	# add routes to loopback addresses
 	#
-	ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2
-	ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1
+	ip -netns $host_1 ro add 172.16.101.2/32 via 172.16.1.2
+	ip -netns $host_2 ro add 172.16.101.1/32 via 172.16.1.1
 }
 
 setup_l2tp_ipv6()
@@ -175,28 +168,28 @@  setup_l2tp_ipv6()
 	#
 	# configure l2tpv3 tunnel on host-1
 	#
-	ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \
+	ip -netns $host_1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \
 			 encap ip local 2001:db8:1::1 remote 2001:db8:2::1
-	ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \
+	ip -netns $host_1 l2tp add session name l2tp6 tunnel_id 1061 \
 			 session_id 1061 peer_session_id 1062
-	ip -netns host-1 link set dev l2tp6 up
-	ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
+	ip -netns $host_1 link set dev l2tp6 up
+	ip -netns $host_1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
 
 	#
 	# configure l2tpv3 tunnel on host-2
 	#
-	ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \
+	ip -netns $host_2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \
 			 encap ip local 2001:db8:2::1 remote 2001:db8:1::1
-	ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \
+	ip -netns $host_2 l2tp add session name l2tp6 tunnel_id 1062 \
 			 session_id 1062 peer_session_id 1061
-	ip -netns host-2 link set dev l2tp6 up
-	ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
+	ip -netns $host_2 link set dev l2tp6 up
+	ip -netns $host_2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
 
 	#
 	# add routes to loopback addresses
 	#
-	ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2
-	ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1
+	ip -netns $host_1 -6 ro add fc00:101::2/128 via fc00:1::2
+	ip -netns $host_2 -6 ro add fc00:101::1/128 via fc00:1::1
 }
 
 setup()
@@ -205,21 +198,22 @@  setup()
 	cleanup
 
 	set -e
-	create_ns host-1 172.16.101.1/32 fc00:101::1/128
-	create_ns host-2 172.16.101.2/32 fc00:101::2/128
-	create_ns router
+	setup_ns host_1 host_2 router
+	create_ns $host_1 172.16.101.1/32 fc00:101::1/128
+	create_ns $host_2 172.16.101.2/32 fc00:101::2/128
+	create_ns $router
 
-	connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \
-	           router eth1 10.1.1.2/24 2001:db8:1::2/64
+	connect_ns $host_1 eth0 10.1.1.1/24 2001:db8:1::1/64 \
+	           $router eth1 10.1.1.2/24 2001:db8:1::2/64
 
-	connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \
-	           router eth2 10.1.2.2/24 2001:db8:2::2/64
+	connect_ns $host_2 eth0 10.1.2.1/24 2001:db8:2::1/64 \
+	           $router eth2 10.1.2.2/24 2001:db8:2::2/64
 
-	ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2
-	ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
+	ip -netns $host_1 ro add 10.1.2.0/24 via 10.1.1.2
+	ip -netns $host_1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
 
-	ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2
-	ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
+	ip -netns $host_2 ro add 10.1.1.0/24 via 10.1.2.2
+	ip -netns $host_2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
 
 	setup_l2tp_ipv4
 	setup_l2tp_ipv6
@@ -231,38 +225,38 @@  setup_ipsec()
 	#
 	# IPv4
 	#
-	run_cmd host-1 ip xfrm policy add \
+	run_cmd $host_1 ip xfrm policy add \
 		src 10.1.1.1 dst 10.1.2.1 dir out \
 		tmpl proto esp mode transport
 
-	run_cmd host-1 ip xfrm policy add \
+	run_cmd $host_1 ip xfrm policy add \
 		src 10.1.2.1 dst 10.1.1.1 dir in \
 		tmpl proto esp mode transport
 
-	run_cmd host-2 ip xfrm policy add \
+	run_cmd $host_2 ip xfrm policy add \
 		src 10.1.1.1 dst 10.1.2.1 dir in \
 		tmpl proto esp mode transport
 
-	run_cmd host-2 ip xfrm policy add \
+	run_cmd $host_2 ip xfrm policy add \
 		src 10.1.2.1 dst 10.1.1.1 dir out \
 		tmpl proto esp mode transport
 
-	ip -netns host-1 xfrm state add \
+	ip -netns $host_1 xfrm state add \
 		src 10.1.1.1 dst 10.1.2.1 \
 		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
 
-	ip -netns host-1 xfrm state add \
+	ip -netns $host_1 xfrm state add \
 		src 10.1.2.1 dst 10.1.1.1 \
 		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
 
-	ip -netns host-2 xfrm state add \
+	ip -netns $host_2 xfrm state add \
 		src 10.1.1.1 dst 10.1.2.1 \
 		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
 
-	ip -netns host-2 xfrm state add \
+	ip -netns $host_2 xfrm state add \
 		src 10.1.2.1 dst 10.1.1.1 \
 		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
@@ -270,38 +264,38 @@  setup_ipsec()
 	#
 	# IPV6
 	#
-	run_cmd host-1 ip -6 xfrm policy add \
+	run_cmd $host_1 ip -6 xfrm policy add \
 		src 2001:db8:1::1 dst 2001:db8:2::1 dir out \
 		tmpl proto esp mode transport
 
-	run_cmd host-1 ip -6 xfrm policy add \
+	run_cmd $host_1 ip -6 xfrm policy add \
 		src 2001:db8:2::1 dst 2001:db8:1::1 dir in \
 		tmpl proto esp mode transport
 
-	run_cmd host-2 ip -6 xfrm policy add \
+	run_cmd $host_2 ip -6 xfrm policy add \
 		src 2001:db8:1::1 dst 2001:db8:2::1 dir in \
 		tmpl proto esp mode transport
 
-	run_cmd host-2 ip -6 xfrm policy add \
+	run_cmd $host_2 ip -6 xfrm policy add \
 		src 2001:db8:2::1 dst 2001:db8:1::1 dir out \
 		tmpl proto esp mode transport
 
-	ip -netns host-1 -6 xfrm state add \
+	ip -netns $host_1 -6 xfrm state add \
 		src 2001:db8:1::1 dst 2001:db8:2::1 \
 		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
 
-	ip -netns host-1 -6 xfrm state add \
+	ip -netns $host_1 -6 xfrm state add \
 		src 2001:db8:2::1 dst 2001:db8:1::1 \
 		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
 
-	ip -netns host-2 -6 xfrm state add \
+	ip -netns $host_2 -6 xfrm state add \
 		src 2001:db8:1::1 dst 2001:db8:2::1 \
 		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
 
-	ip -netns host-2 -6 xfrm state add \
+	ip -netns $host_2 -6 xfrm state add \
 		src 2001:db8:2::1 dst 2001:db8:1::1 \
 		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
 		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
@@ -309,10 +303,10 @@  setup_ipsec()
 
 teardown_ipsec()
 {
-	run_cmd host-1 ip xfrm state flush
-	run_cmd host-1 ip xfrm policy flush
-	run_cmd host-2 ip xfrm state flush
-	run_cmd host-2 ip xfrm policy flush
+	run_cmd $host_1 ip xfrm state flush
+	run_cmd $host_1 ip xfrm policy flush
+	run_cmd $host_2 ip xfrm state flush
+	run_cmd $host_2 ip xfrm policy flush
 }
 
 ################################################################################
@@ -322,16 +316,16 @@  run_ping()
 {
 	local desc="$1"
 
-	run_cmd host-1 ping -c1 -w1 172.16.1.2
+	run_cmd $host_1 ping -c1 -w1 172.16.1.2
 	log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
 
-	run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+	run_cmd $host_1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
 	log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
 
-	run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+	run_cmd $host_1 ${ping6} -c1 -w1 fc00:1::2
 	log_test $? 0 "IPv6 basic L2TP tunnel ${desc}"
 
-	run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+	run_cmd $host_1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
 	log_test $? 0 "IPv6 route through L2TP tunnel ${desc}"
 }
 
@@ -344,16 +338,16 @@  run_tests()
 
 	setup_ipsec
 	run_ping "- with IPsec"
-	run_cmd host-1 ping -c1 -w1 172.16.1.2
+	run_cmd $host_1 ping -c1 -w1 172.16.1.2
 	log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
 
-	run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+	run_cmd $host_1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
 	log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
 
-	run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+	run_cmd $host_1 ${ping6} -c1 -w1 fc00:1::2
 	log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec"
 
-	run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+	run_cmd $host_1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
 	log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec"
 
 	teardown_ipsec