From patchwork Fri Dec 1 00:14:20 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christian Marangi X-Patchwork-Id: 13475204 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="ETpdoLCf" Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7CE431729; Thu, 30 Nov 2023 16:15:00 -0800 (PST) Received: by mail-wm1-x32b.google.com with SMTP id 5b1f17b1804b1-40b538d5c4eso11652535e9.1; Thu, 30 Nov 2023 16:15:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1701389699; x=1701994499; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=xlc394zhfhzVq8aAP75het7E8RUg91LzoOZRny54CvY=; b=ETpdoLCfgi8S+/R23XPUatPQz+jto6TXmohgozLiX9wwQ+ahb1iZT+D8ZYHqGGUCH4 z4MmxMhcS9c7RNvAqYCCqAP8NiVOUqLg9LNKTG4d3CVTcU6FZBi6T4QbprkBiDqHaFpj k3BvFUm6dwA9m1XBIZVZmiJyq7YzVovy9HWBTGiGA8h2c9Rz3c6C/ZZLCsbYu0TObsuI GJLiD64LzDjbGQX6gDmgZUZ2Lf5NYxZIohe7dzS97Q0FdhUyz4tYAntZT3ujFjFS3dI5 hzgbQWqSpMWzbDwQpVatN+N29A7WpMEzZc72gHDOQmSaonB4QiTEtrzJf1iEblaqmtUu uABA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1701389699; x=1701994499; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xlc394zhfhzVq8aAP75het7E8RUg91LzoOZRny54CvY=; b=fw5fl+JwqNv0DbV+u/rengw1NRUu8qCFUIGqsgaxj6GhfH/g/7bIIsDYgnRGDrVa7U iWvoYMMpqzOw3kElON4rhg0gPuVExGy/xHs+Ep6CSkS5ALbw5JwfWLyWvpXypT27+ObJ AYcd3vs94d+APMTH8hg+fuVuZMeOM3HdNv2Zxa1dVOAwwTMgLd4g6Ua1q87PfpXRA3VQ gCDIcZGPuP2tLYCGdmufTDF43oOcPTJMGdLxPCpuxqMOQBR6CZDMEmQui8PiEv2NFW2G x50JrkGWp+hj4MGDNSjsYL9NVmeDzdo4zMWUT+7+iKeG/z2V1lyUuonICJWy6eMoTSVp k8gw== X-Gm-Message-State: AOJu0YzBOIGIKzH5C6C3ePVZTyVZmQtcUSSonIS9k+g3qNt/J2EpuqPD iGYp2XbOS+b1Lkha/aGgcSeICDPvmDE= X-Google-Smtp-Source: AGHT+IEKS05Ow6h/Fo0fRLm62WTLx5Ro7rvGRDW5qnD9orrhSRAe5EXcUU3nHFISMcsIrFbAgDQssg== X-Received: by 2002:a7b:cd92:0:b0:40b:5e59:b7a5 with SMTP id y18-20020a7bcd92000000b0040b5e59b7a5mr114394wmj.130.1701389698798; Thu, 30 Nov 2023 16:14:58 -0800 (PST) Received: from localhost.localdomain (93-34-89-13.ip49.fastwebnet.it. [93.34.89.13]) by smtp.googlemail.com with ESMTPSA id g16-20020a05600c4ed000b0040b47c53610sm3535457wmq.14.2023.11.30.16.14.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 30 Nov 2023 16:14:58 -0800 (PST) From: Christian Marangi To: Andrew Lunn , Heiner Kallweit , Russell King , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Christian Marangi Subject: [net-next PATCH v2 10/12] net: phy: at803x: make at8031 related DT functions name more specific Date: Fri, 1 Dec 2023 01:14:20 +0100 Message-Id: <20231201001423.20989-11-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.40.1 In-Reply-To: <20231201001423.20989-1-ansuelsmth@gmail.com> References: <20231201001423.20989-1-ansuelsmth@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Rename at8031 related DT function name to a more specific name referencing they are only related to at8031 and not to the generic at803x PHY family. Signed-off-by: Christian Marangi --- drivers/net/phy/at803x.c | 268 +++++++++++++++++++-------------------- 1 file changed, 134 insertions(+), 134 deletions(-) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 1897030667d9..73d1a5e29202 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -583,139 +583,6 @@ static int at803x_resume(struct phy_device *phydev) return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); } -static int at803x_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, - unsigned int selector) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - - if (selector) - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - 0, AT803X_DEBUG_RGMII_1V8); - else - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - AT803X_DEBUG_RGMII_1V8, 0); -} - -static int at803x_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - int val; - - val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); - if (val < 0) - return val; - - return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; -} - -static const struct regulator_ops vddio_regulator_ops = { - .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = at803x_rgmii_reg_set_voltage_sel, - .get_voltage_sel = at803x_rgmii_reg_get_voltage_sel, -}; - -static const unsigned int vddio_voltage_table[] = { - 1500000, - 1800000, -}; - -static const struct regulator_desc vddio_desc = { - .name = "vddio", - .of_match = of_match_ptr("vddio-regulator"), - .n_voltages = ARRAY_SIZE(vddio_voltage_table), - .volt_table = vddio_voltage_table, - .ops = &vddio_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static const struct regulator_ops vddh_regulator_ops = { -}; - -static const struct regulator_desc vddh_desc = { - .name = "vddh", - .of_match = of_match_ptr("vddh-regulator"), - .n_voltages = 1, - .fixed_uV = 2500000, - .ops = &vddh_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static int at8031_register_regulators(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - struct device *dev = &phydev->mdio.dev; - struct regulator_config config = { }; - - config.dev = dev; - config.driver_data = phydev; - - priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); - if (IS_ERR(priv->vddio_rdev)) { - phydev_err(phydev, "failed to register VDDIO regulator\n"); - return PTR_ERR(priv->vddio_rdev); - } - - priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); - if (IS_ERR(priv->vddh_rdev)) { - phydev_err(phydev, "failed to register VDDH regulator\n"); - return PTR_ERR(priv->vddh_rdev); - } - - return 0; -} - -static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -{ - struct phy_device *phydev = upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - linkmode_zero(phy_support); - phylink_set(phy_support, 1000baseX_Full); - phylink_set(phy_support, 1000baseT_Full); - phylink_set(phy_support, Autoneg); - phylink_set(phy_support, Pause); - phylink_set(phy_support, Asym_Pause); - - linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); - /* Some modules support 10G modes as well as others we support. - * Mask out non-supported modes so the correct interface is picked. - */ - linkmode_and(sfp_support, phy_support, sfp_support); - - if (linkmode_empty(sfp_support)) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; - } - - iface = sfp_select_interface(phydev->sfp_bus, sfp_support); - - /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes - * interface for use with SFP modules. - * However, some copper modules detected as having a preferred SGMII - * interface do default to and function in 1000Base-X mode, so just - * print a warning and allow such modules, as they may have some chance - * of working. - */ - if (iface == PHY_INTERFACE_MODE_SGMII) - dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); - else if (iface != PHY_INTERFACE_MODE_1000BASEX) - return -EINVAL; - - return 0; -} - -static const struct sfp_upstream_ops at803x_sfp_ops = { - .attach = phy_sfp_attach, - .detach = phy_sfp_detach, - .module_insert = at803x_sfp_insert, -}; - static int at803x_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; @@ -1498,6 +1365,139 @@ static int at803x_cable_test_start(struct phy_device *phydev) return 0; } +static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + + if (selector) + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + 0, AT803X_DEBUG_RGMII_1V8); + else + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + AT803X_DEBUG_RGMII_1V8, 0); +} + +static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + int val; + + val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); + if (val < 0) + return val; + + return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; +} + +static const struct regulator_ops vddio_regulator_ops = { + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, + .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, +}; + +static const unsigned int vddio_voltage_table[] = { + 1500000, + 1800000, +}; + +static const struct regulator_desc vddio_desc = { + .name = "vddio", + .of_match = of_match_ptr("vddio-regulator"), + .n_voltages = ARRAY_SIZE(vddio_voltage_table), + .volt_table = vddio_voltage_table, + .ops = &vddio_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static const struct regulator_ops vddh_regulator_ops = { +}; + +static const struct regulator_desc vddh_desc = { + .name = "vddh", + .of_match = of_match_ptr("vddh-regulator"), + .n_voltages = 1, + .fixed_uV = 2500000, + .ops = &vddh_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static int at8031_register_regulators(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + struct regulator_config config = { }; + + config.dev = dev; + config.driver_data = phydev; + + priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); + if (IS_ERR(priv->vddio_rdev)) { + phydev_err(phydev, "failed to register VDDIO regulator\n"); + return PTR_ERR(priv->vddio_rdev); + } + + priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); + if (IS_ERR(priv->vddh_rdev)) { + phydev_err(phydev, "failed to register VDDH regulator\n"); + return PTR_ERR(priv->vddh_rdev); + } + + return 0; +} + +static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); + __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + DECLARE_PHY_INTERFACE_MASK(interfaces); + phy_interface_t iface; + + linkmode_zero(phy_support); + phylink_set(phy_support, 1000baseX_Full); + phylink_set(phy_support, 1000baseT_Full); + phylink_set(phy_support, Autoneg); + phylink_set(phy_support, Pause); + phylink_set(phy_support, Asym_Pause); + + linkmode_zero(sfp_support); + sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); + /* Some modules support 10G modes as well as others we support. + * Mask out non-supported modes so the correct interface is picked. + */ + linkmode_and(sfp_support, phy_support, sfp_support); + + if (linkmode_empty(sfp_support)) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + + iface = sfp_select_interface(phydev->sfp_bus, sfp_support); + + /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes + * interface for use with SFP modules. + * However, some copper modules detected as having a preferred SGMII + * interface do default to and function in 1000Base-X mode, so just + * print a warning and allow such modules, as they may have some chance + * of working. + */ + if (iface == PHY_INTERFACE_MODE_SGMII) + dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); + else if (iface != PHY_INTERFACE_MODE_1000BASEX) + return -EINVAL; + + return 0; +} + +static const struct sfp_upstream_ops at8031_sfp_ops = { + .attach = phy_sfp_attach, + .detach = phy_sfp_detach, + .module_insert = at8031_sfp_insert, +}; + static int at8031_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; @@ -1519,7 +1519,7 @@ static int at8031_parse_dt(struct phy_device *phydev) } /* Only AR8031/8033 support 1000Base-X for SFP modules */ - return phy_sfp_probe(phydev, &at803x_sfp_ops); + return phy_sfp_probe(phydev, &at8031_sfp_ops); } static int at8031_probe(struct phy_device *phydev)