From patchwork Wed Dec 6 23:57:26 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christian Marangi X-Patchwork-Id: 13482488 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="kgTs+1q4" Received: from mail-wm1-x331.google.com (mail-wm1-x331.google.com [IPv6:2a00:1450:4864:20::331]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 68A9B10C3; Wed, 6 Dec 2023 16:00:31 -0800 (PST) Received: by mail-wm1-x331.google.com with SMTP id 5b1f17b1804b1-40c1e3ea2f2so3787145e9.2; Wed, 06 Dec 2023 16:00:31 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1701907230; x=1702512030; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Q1GjoFCHwWRz6fRwuR7ibzQ19O6g0gXQ8gbR6f752RI=; b=kgTs+1q4xbcaFHdcXfiVH4sl+tA1vJPUEriiBIGOh7nlKjP7JPsnKhYnBsv+5BZYfM KCckmuAfYsQZh5iA9B+YihSU3PXNSSXn3u5YG+KnEAd+4vyCVODAP5D9Wr6FmoOL2LJ+ KnwsD6BJIWHq1BOWm5kLU++7JUmQvnOqgS+4ANGbW7K8nJCgZrR/BWcW8N6UMqI95qai KdmYyrmyJ1/UdEvQQ3yasnFgQaIYuigHnfv88LW8nGnY675sXiK2V1riUZRAtRZDK6oM vy3p9Axc52490nWyAIVyA93og7ntIjlD8yg2RzeL2SB7vo7cHFYIztKZxAB3lLh6ZsON yMrA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1701907230; x=1702512030; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Q1GjoFCHwWRz6fRwuR7ibzQ19O6g0gXQ8gbR6f752RI=; b=MkoovLu8E1pITLU1vB/fv6cWoKV4thmPN7Ooy8zH3w5tjYQdBdsSBD3wedWGdVMog0 SoDIpsE4HL6lXaitF5Db5wZrg7AZ2KftZH7HTjBiT6hGoHtqVJbgcDCcQO+eSDSh2KAv P912o8nMImN5YLM1MG0rSRCo+DpX06URFnVJm5BguhpQto//mgIRahkQva/12J5i2js1 TuNzBcbDXJNdAEMZNdCNBLQKuw3Ow+QvK/5k5eDP76gQCRvOLSIOnz/mZh655zSrm5nR TKnx0EtUUzCHi55Y+puo81FmOftMxAUBzD6wM/RYCPL6qrNvNj+jzQ7BX6M/g5RFhN/z ZiyA== X-Gm-Message-State: AOJu0Yx4kN3HZYzzwWF7mk2+SDIsbvzK/ufE+DLn8udRQEDWpxxkvfCg 6uclRfjlcsYxhu/HtoUt9Ag= X-Google-Smtp-Source: AGHT+IGs5gfiZWcjtq9eQJ2iEvpi5sElLdhowK5mfeV692ypbllrxMYFKhCPvNJmzfe7kyKiNiL9sw== X-Received: by 2002:a05:600c:b46:b0:40b:5e1b:54a4 with SMTP id k6-20020a05600c0b4600b0040b5e1b54a4mr1209251wmr.48.1701907229812; Wed, 06 Dec 2023 16:00:29 -0800 (PST) Received: from localhost.localdomain (host-79-26-252-6.retail.telecomitalia.it. [79.26.252.6]) by smtp.googlemail.com with ESMTPSA id je16-20020a05600c1f9000b00405442edc69sm50280wmb.14.2023.12.06.16.00.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 06 Dec 2023 16:00:29 -0800 (PST) From: Christian Marangi To: Andrew Lunn , Heiner Kallweit , Russell King , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Christian Marangi Subject: [net-next PATCH v3 11/13] net: phy: at803x: move at8031 functions in dedicated section Date: Thu, 7 Dec 2023 00:57:26 +0100 Message-Id: <20231206235728.6985-12-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.40.1 In-Reply-To: <20231206235728.6985-1-ansuelsmth@gmail.com> References: <20231206235728.6985-1-ansuelsmth@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org Move at8031 functions in dedicated section with dedicated at8031 parse_dt and probe. Signed-off-by: Christian Marangi --- drivers/net/phy/at803x.c | 266 +++++++++++++++++++-------------------- 1 file changed, 133 insertions(+), 133 deletions(-) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 3ae15ed7d634..73d1a5e29202 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -583,139 +583,6 @@ static int at803x_resume(struct phy_device *phydev) return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); } -static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, - unsigned int selector) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - - if (selector) - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - 0, AT803X_DEBUG_RGMII_1V8); - else - return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, - AT803X_DEBUG_RGMII_1V8, 0); -} - -static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) -{ - struct phy_device *phydev = rdev_get_drvdata(rdev); - int val; - - val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); - if (val < 0) - return val; - - return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; -} - -static const struct regulator_ops vddio_regulator_ops = { - .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, - .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, -}; - -static const unsigned int vddio_voltage_table[] = { - 1500000, - 1800000, -}; - -static const struct regulator_desc vddio_desc = { - .name = "vddio", - .of_match = of_match_ptr("vddio-regulator"), - .n_voltages = ARRAY_SIZE(vddio_voltage_table), - .volt_table = vddio_voltage_table, - .ops = &vddio_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static const struct regulator_ops vddh_regulator_ops = { -}; - -static const struct regulator_desc vddh_desc = { - .name = "vddh", - .of_match = of_match_ptr("vddh-regulator"), - .n_voltages = 1, - .fixed_uV = 2500000, - .ops = &vddh_regulator_ops, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, -}; - -static int at8031_register_regulators(struct phy_device *phydev) -{ - struct at803x_priv *priv = phydev->priv; - struct device *dev = &phydev->mdio.dev; - struct regulator_config config = { }; - - config.dev = dev; - config.driver_data = phydev; - - priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); - if (IS_ERR(priv->vddio_rdev)) { - phydev_err(phydev, "failed to register VDDIO regulator\n"); - return PTR_ERR(priv->vddio_rdev); - } - - priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); - if (IS_ERR(priv->vddh_rdev)) { - phydev_err(phydev, "failed to register VDDH regulator\n"); - return PTR_ERR(priv->vddh_rdev); - } - - return 0; -} - -static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -{ - struct phy_device *phydev = upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - linkmode_zero(phy_support); - phylink_set(phy_support, 1000baseX_Full); - phylink_set(phy_support, 1000baseT_Full); - phylink_set(phy_support, Autoneg); - phylink_set(phy_support, Pause); - phylink_set(phy_support, Asym_Pause); - - linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); - /* Some modules support 10G modes as well as others we support. - * Mask out non-supported modes so the correct interface is picked. - */ - linkmode_and(sfp_support, phy_support, sfp_support); - - if (linkmode_empty(sfp_support)) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; - } - - iface = sfp_select_interface(phydev->sfp_bus, sfp_support); - - /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes - * interface for use with SFP modules. - * However, some copper modules detected as having a preferred SGMII - * interface do default to and function in 1000Base-X mode, so just - * print a warning and allow such modules, as they may have some chance - * of working. - */ - if (iface == PHY_INTERFACE_MODE_SGMII) - dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); - else if (iface != PHY_INTERFACE_MODE_1000BASEX) - return -EINVAL; - - return 0; -} - -static const struct sfp_upstream_ops at8031_sfp_ops = { - .attach = phy_sfp_attach, - .detach = phy_sfp_detach, - .module_insert = at8031_sfp_insert, -}; - static int at803x_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; @@ -1498,6 +1365,139 @@ static int at803x_cable_test_start(struct phy_device *phydev) return 0; } +static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + + if (selector) + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + 0, AT803X_DEBUG_RGMII_1V8); + else + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, + AT803X_DEBUG_RGMII_1V8, 0); +} + +static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) +{ + struct phy_device *phydev = rdev_get_drvdata(rdev); + int val; + + val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); + if (val < 0) + return val; + + return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; +} + +static const struct regulator_ops vddio_regulator_ops = { + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, + .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, +}; + +static const unsigned int vddio_voltage_table[] = { + 1500000, + 1800000, +}; + +static const struct regulator_desc vddio_desc = { + .name = "vddio", + .of_match = of_match_ptr("vddio-regulator"), + .n_voltages = ARRAY_SIZE(vddio_voltage_table), + .volt_table = vddio_voltage_table, + .ops = &vddio_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static const struct regulator_ops vddh_regulator_ops = { +}; + +static const struct regulator_desc vddh_desc = { + .name = "vddh", + .of_match = of_match_ptr("vddh-regulator"), + .n_voltages = 1, + .fixed_uV = 2500000, + .ops = &vddh_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static int at8031_register_regulators(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + struct regulator_config config = { }; + + config.dev = dev; + config.driver_data = phydev; + + priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); + if (IS_ERR(priv->vddio_rdev)) { + phydev_err(phydev, "failed to register VDDIO regulator\n"); + return PTR_ERR(priv->vddio_rdev); + } + + priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); + if (IS_ERR(priv->vddh_rdev)) { + phydev_err(phydev, "failed to register VDDH regulator\n"); + return PTR_ERR(priv->vddh_rdev); + } + + return 0; +} + +static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); + __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + DECLARE_PHY_INTERFACE_MASK(interfaces); + phy_interface_t iface; + + linkmode_zero(phy_support); + phylink_set(phy_support, 1000baseX_Full); + phylink_set(phy_support, 1000baseT_Full); + phylink_set(phy_support, Autoneg); + phylink_set(phy_support, Pause); + phylink_set(phy_support, Asym_Pause); + + linkmode_zero(sfp_support); + sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); + /* Some modules support 10G modes as well as others we support. + * Mask out non-supported modes so the correct interface is picked. + */ + linkmode_and(sfp_support, phy_support, sfp_support); + + if (linkmode_empty(sfp_support)) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + + iface = sfp_select_interface(phydev->sfp_bus, sfp_support); + + /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes + * interface for use with SFP modules. + * However, some copper modules detected as having a preferred SGMII + * interface do default to and function in 1000Base-X mode, so just + * print a warning and allow such modules, as they may have some chance + * of working. + */ + if (iface == PHY_INTERFACE_MODE_SGMII) + dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); + else if (iface != PHY_INTERFACE_MODE_1000BASEX) + return -EINVAL; + + return 0; +} + +static const struct sfp_upstream_ops at8031_sfp_ops = { + .attach = phy_sfp_attach, + .detach = phy_sfp_detach, + .module_insert = at8031_sfp_insert, +}; + static int at8031_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node;