diff mbox series

[RESEND,v1,7/7] riscv: dts: microchip: add missing CAN bus clocks

Message ID 20231208-resample-selection-3c2c8cecc489@spud (mailing list archive)
State Not Applicable
Headers show
Series MPFS clock fixes required for correct CAN clock modeling | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Conor Dooley Dec. 8, 2023, 5:12 p.m. UTC 
From: Conor Dooley <conor.dooley@microchip.com>

The CAN controller on PolarFire SoC has an AHB peripheral clock _and_ a
CAN bus clock. The bus clock was omitted when the binding was written,
but is required for operation. Make up for lost time and add to the DT.

Fixes: 38a71fc04895 ("riscv: dts: microchip: add mpfs's CAN controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 266489d43912..4d70df0f908c 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -416,7 +416,7 @@  i2c1: i2c@2010b000 {
 		can0: can@2010c000 {
 			compatible = "microchip,mpfs-can";
 			reg = <0x0 0x2010c000 0x0 0x1000>;
-			clocks = <&clkcfg CLK_CAN0>;
+			clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>;
 			interrupt-parent = <&plic>;
 			interrupts = <56>;
 			status = "disabled";
@@ -425,7 +425,7 @@  can0: can@2010c000 {
 		can1: can@2010d000 {
 			compatible = "microchip,mpfs-can";
 			reg = <0x0 0x2010d000 0x0 0x1000>;
-			clocks = <&clkcfg CLK_CAN1>;
+			clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>;
 			interrupt-parent = <&plic>;
 			interrupts = <57>;
 			status = "disabled";