diff mbox series

[net-next,v4,06/13] net: phy: at803x: move specific at8031 probe mode check to dedicated probe

Message ID 20231208145200.25162-7-ansuelsmth@gmail.com (mailing list archive)
State Accepted
Commit 25d2ba94005fac18fe68878cddff59a67e115554
Delegated to: Netdev Maintainers
Headers show
Series net: phy: at803x: cleanup | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1115 this patch: 1115
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 1142 this patch: 1142
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1142 this patch: 1142
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 57 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Christian Marangi Dec. 8, 2023, 2:51 p.m. UTC 
Move specific at8031 probe mode check to dedicated probe to make
at803x_probe more generic and keep code tidy.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/at803x.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5694c2667b4d..6cb41af31818 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -844,26 +844,6 @@  static int at803x_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
-		int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-		int mode_cfg;
-
-		if (ccr < 0)
-			return ccr;
-		mode_cfg = ccr & AT803X_MODE_CFG_MASK;
-
-		switch (mode_cfg) {
-		case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
-		case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
-			priv->is_1000basex = true;
-			fallthrough;
-		case AT803X_MODE_CFG_FX100_RGMII_50OHM:
-		case AT803X_MODE_CFG_FX100_RGMII_75OHM:
-			priv->is_fiber = true;
-			break;
-		}
-	}
-
 	return 0;
 }
 
@@ -1584,6 +1564,9 @@  static int at8031_parse_dt(struct phy_device *phydev)
 
 static int at8031_probe(struct phy_device *phydev)
 {
+	struct at803x_priv *priv = phydev->priv;
+	int mode_cfg;
+	int ccr;
 	int ret;
 
 	ret = at803x_probe(phydev);
@@ -1597,6 +1580,22 @@  static int at8031_probe(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+	if (ccr < 0)
+		return ccr;
+	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
+
+	switch (mode_cfg) {
+	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
+	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
+		priv->is_1000basex = true;
+		fallthrough;
+	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
+	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
+		priv->is_fiber = true;
+		break;
+	}
+
 	/* Disable WoL in 1588 register which is enabled
 	 * by default
 	 */