From patchwork Thu Dec 14 09:48:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luo Jie X-Patchwork-Id: 13492670 X-Patchwork-Delegate: kuba@kernel.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Sjo6Lk4r" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7B335118; Thu, 14 Dec 2023 01:48:55 -0800 (PST) Received: from pps.filterd (m0279864.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 3BE5d0lK018068; Thu, 14 Dec 2023 09:48:41 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s= qcppdkim1; bh=gZ/G1pFW0dLa+8o+dWcun5klmauXu0uQjqsi4LtQX7Q=; b=Sj o6Lk4rsYuaoUSPimAUc94NrhgZqDwq+IEaFD3OG49W3DoEetkpMHS6Q1hMZCouaS aEc3fCd5RgI1XCop9qS1rRnRMXkRvtL9vr1MRJlijnKBo6JVl8ZMgcBn6H3E5UZ/ ZZb3/X7uLgaOlwjpIXhMFl5iEWlUZyBTOldodMW4dWXOmKHHOD448TDcAMAoJyYm sAmC/0Taf9FPJcaOWVa7WfitsstVbN0HCRWcqE89T1vxFeFQ8PVMoHa02Cd8UoTx DsFA4w8RBmu8/9gwhjO8OQ+ZI4Tf/WwDeLU9otxE8MBhKqKTgseTX+6SMuEdhUX4 af2sFsa0QoUl9I3uCL2Q== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uynre130q-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 14 Dec 2023 09:48:41 +0000 (GMT) Received: from nalasex01c.na.qualcomm.com (nalasex01c.na.qualcomm.com [10.47.97.35]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3BE9me0E008508 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 14 Dec 2023 09:48:40 GMT Received: from akronite-sh-dev02.qualcomm.com (10.80.80.8) by nalasex01c.na.qualcomm.com (10.47.97.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.40; Thu, 14 Dec 2023 01:48:36 -0800 From: Luo Jie To: , , , , , , , , , , , , CC: , , , Subject: [PATCH v7 03/14] net: phy: at803x: add QCA8084 ethernet phy support Date: Thu, 14 Dec 2023 17:48:02 +0800 Message-ID: <20231214094813.24690-4-quic_luoj@quicinc.com> X-Mailer: git-send-email 2.42.0 In-Reply-To: <20231214094813.24690-1-quic_luoj@quicinc.com> References: <20231214094813.24690-1-quic_luoj@quicinc.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01c.na.qualcomm.com (10.47.97.35) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: RhP1EfKtgo2pdt8Zq9Sf4r5t1XhGbXFR X-Proofpoint-GUID: RhP1EfKtgo2pdt8Zq9Sf4r5t1XhGbXFR X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-09_01,2023-12-07_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 adultscore=0 mlxlogscore=965 suspectscore=0 impostorscore=0 phishscore=0 bulkscore=0 spamscore=0 malwarescore=0 priorityscore=1501 lowpriorityscore=0 clxscore=1015 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2311290000 definitions=main-2312140065 X-Patchwork-Delegate: kuba@kernel.org Add qca8084 PHY support, which is four-port PHY with maximum link capability 2.5G, the features of each port is almost same as QCA8081 and slave seed config is not needed. Three kind of interface modes supported by qca8084. PHY_INTERFACE_MODE_10G_QXGMII, PHY_INTERFACE_MODE_2500BASEX and PHY_INTERFACE_MODE_SGMII. The PCS(serdes) and clock are also needed to be configured to bringup qca8084 PHY, which will be added in the pcs driver. The additional CDT configurations used for qca8084. Signed-off-by: Luo Jie --- drivers/net/phy/at803x.c | 49 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 37fb033e1c29..8dfdf2ff56a5 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -176,6 +176,7 @@ #define AT8030_PHY_ID_MASK 0xffffffef #define QCA8081_PHY_ID 0x004dd101 +#define QCA8084_PHY_ID 0x004dd180 #define QCA8327_A_PHY_ID 0x004dd033 #define QCA8327_B_PHY_ID 0x004dd034 @@ -1760,6 +1761,9 @@ static bool qca808x_is_prefer_master(struct phy_device *phydev) static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev) { + if (phydev_id_compare(phydev, QCA8084_PHY_ID)) + return false; + return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); } @@ -1824,6 +1828,23 @@ static int qca808x_read_status(struct phy_device *phydev) return ret; if (phydev->link) { + /* There are two PCSs available for QCA8084, which support the + * following interface modes. + * + * 1. PHY_INTERFACE_MODE_10G_QXGMII utilizes PCS1 for all + * available 4 ports, which is for all link speeds. + * + * 2. PHY_INTERFACE_MODE_2500BASEX utilizes PCS0 for the + * fourth port, which is only for the link speed 2500M same + * as QCA8081. + * + * 3. PHY_INTERFACE_MODE_SGMII utilizes PCS0 for the fourth + * port, which is for the link speed 10M, 100M and 1000M same + * as QCA8081. + */ + if (phydev->interface == PHY_INTERFACE_MODE_10G_QXGMII) + return 0; + if (phydev->speed == SPEED_2500) phydev->interface = PHY_INTERFACE_MODE_2500BASEX; else @@ -1958,6 +1979,14 @@ static int qca808x_cable_test_start(struct phy_device *phydev) phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060); phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060); + if (phydev_id_compare(phydev, QCA8084_PHY_ID)) { + /* Adjust the positive and negative pulse thereshold of CDT */ + phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8075, 0xa060); + + /* Disable the near echo bypass */ + phy_modify_mmd(phydev, MDIO_MMD_PCS, 0x807f, BIT(15), 0); + } + return 0; } @@ -2227,6 +2256,25 @@ static struct phy_driver at803x_driver[] = { .cable_test_start = qca808x_cable_test_start, .cable_test_get_status = qca808x_cable_test_get_status, .link_change_notify = qca808x_link_change_notify, +}, { + /* Qualcomm QCA8084 */ + PHY_ID_MATCH_MODEL(QCA8084_PHY_ID), + .name = "Qualcomm QCA8084", + .flags = PHY_POLL_CABLE_TEST, + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .get_features = qca808x_get_features, + .config_aneg = at803x_config_aneg, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_status = qca808x_read_status, + .soft_reset = qca808x_soft_reset, + .cable_test_start = qca808x_cable_test_start, + .cable_test_get_status = qca808x_cable_test_get_status, }, }; module_phy_driver(at803x_driver); @@ -2242,6 +2290,7 @@ static struct mdio_device_id __maybe_unused atheros_tbl[] = { { PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) }, { PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) }, { PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) }, + { PHY_ID_MATCH_MODEL(QCA8084_PHY_ID) }, { } };