diff mbox series

[net-next,v2,12/21] net: ravb: Move ptp initialization in the driver's ndo_open API for ccc_gac platorms

Message ID 20231214114600.2451162-13-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series net: ravb: Add suspend to RAM and runtime PM support for RZ/G3S | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/apply fail Patch does not apply to net-next

Commit Message

Claudiu Beznea Dec. 14, 2023, 11:45 a.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The initialization sequence for PTP is the same for platforms with ccc_gac
and gptp (according to chapter "Figure 50.71 Flow of gPTP Initialization
(Normal, Common to All Modes)" of the R-Car Series, 3rd generation hardware
manual and chapter "Figure 37A.53 Flow of gPTP Initialization (Normal,
Common to All Modes)" of the RZ/G Series hardware manual).

As some IP variants switch to reset mode (and thus registers' content is
lost) when setting clocks (due to module standby functionality) to be able
to implement runtime PM, move the PTP initialization to the driver's
ndo_open API.

This commit prepares the code for the addition of runtime PM.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v2:
- none; this patch is new

 drivers/net/ethernet/renesas/ravb_main.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

Comments

Sergey Shtylyov Dec. 16, 2023, 5:10 p.m. UTC | #1 
On 12/14/23 2:45 PM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> The initialization sequence for PTP is the same for platforms with ccc_gac
> and gptp (according to chapter "Figure 50.71 Flow of gPTP Initialization
> (Normal, Common to All Modes)" of the R-Car Series, 3rd generation hardware
   Figure is hardly a chapter. :-)

> manual and chapter "Figure 37A.53 Flow of gPTP Initialization (Normal,

   Here as well...

> Common to All Modes)" of the RZ/G Series hardware manual).
> 
> As some IP variants switch to reset mode (and thus registers' content is

   The register content.

> lost) when setting clocks (due to module standby functionality) to be able
> to implement runtime PM, move the PTP initialization to the driver's
> ndo_open API.
> 
> This commit prepares the code for the addition of runtime PM.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

[...]

MBR, Sergey
diff mbox series

Patch

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 6b8ca08be35e..db9222fc57c2 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1835,7 +1835,7 @@  static int ravb_open(struct net_device *ndev)
 		goto out_dma_stop;
 
 	/* Initialise PTP Clock driver */
-	if (info->gptp)
+	if (info->gptp || info->ccc_gac)
 		ravb_ptp_init(ndev, priv->pdev);
 
 	/* PHY control start */
@@ -1849,7 +1849,7 @@  static int ravb_open(struct net_device *ndev)
 
 out_ptp_stop:
 	/* Stop PTP Clock driver */
-	if (info->gptp)
+	if (info->gptp || info->ccc_gac)
 		ravb_ptp_stop(ndev);
 out_dma_stop:
 	ravb_stop_dma(ndev);
@@ -2151,7 +2151,7 @@  static int ravb_close(struct net_device *ndev)
 	ravb_write(ndev, 0, TIC);
 
 	/* Stop PTP Clock driver */
-	if (info->gptp)
+	if (info->gptp || info->ccc_gac)
 		ravb_ptp_stop(ndev);
 
 	/* Set the config mode to stop the AVB-DMAC's processes */
@@ -2846,10 +2846,6 @@  static int ravb_probe(struct platform_device *pdev)
 	/* Initialise HW timestamp list */
 	INIT_LIST_HEAD(&priv->ts_skb_list);
 
-	/* Initialise PTP Clock driver */
-	if (info->ccc_gac)
-		ravb_ptp_init(ndev, pdev);
-
 	/* Debug message level */
 	priv->msg_enable = RAVB_DEF_MSG_ENABLE;
 
@@ -2894,10 +2890,6 @@  static int ravb_probe(struct platform_device *pdev)
 out_dma_free:
 	dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
 			  priv->desc_bat_dma);
-
-	/* Stop PTP Clock driver */
-	if (info->ccc_gac)
-		ravb_ptp_stop(ndev);
 out_rpm_put:
 	pm_runtime_put(&pdev->dev);
 out_rpm_disable:
@@ -2924,10 +2916,6 @@  static void ravb_remove(struct platform_device *pdev)
 
 	ravb_mdio_release(priv);
 
-	/* Stop PTP Clock driver */
-	if (info->ccc_gac)
-		ravb_ptp_stop(ndev);
-
 	dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
 			  priv->desc_bat_dma);