@@ -57,14 +57,6 @@
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
-#define RTL_SUPPORTS_5000FULL BIT(14)
-#define RTL_SUPPORTS_2500FULL BIT(13)
-#define RTL_SUPPORTS_10000FULL BIT(0)
-#define RTL_ADV_2500FULL BIT(7)
-#define RTL_LPADV_10000FULL BIT(11)
-#define RTL_LPADV_5000FULL BIT(6)
-#define RTL_LPADV_2500FULL BIT(5)
-
#define RTL9000A_GINMR 0x14
#define RTL9000A_GINMR_LINK_STATUS BIT(4)
@@ -653,11 +645,11 @@ static int rtl822x_get_features(struct phy_device *phydev)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
- phydev->supported, val & RTL_SUPPORTS_2500FULL);
+ phydev->supported, val & MDIO_PMA_SPEED_2_5G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
- phydev->supported, val & RTL_SUPPORTS_5000FULL);
+ phydev->supported, val & MDIO_PMA_SPEED_5G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
- phydev->supported, val & RTL_SUPPORTS_10000FULL);
+ phydev->supported, val & MDIO_SPEED_10G);
return genphy_read_abilities(phydev);
}
@@ -671,10 +663,11 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->advertising))
- adv2500 = RTL_ADV_2500FULL;
+ adv2500 = MDIO_AN_10GBT_CTRL_ADV2_5G;
ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
- RTL_ADV_2500FULL, adv2500);
+ MDIO_AN_10GBT_CTRL_ADV2_5G,
+ adv2500);
if (ret < 0)
return ret;
}
@@ -693,11 +686,14 @@ static int rtl822x_read_status(struct phy_device *phydev)
return lpadv;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
+ phydev->lp_advertising,
+ lpadv & MDIO_AN_10GBT_STAT_LP10G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
+ phydev->lp_advertising,
+ lpadv & MDIO_AN_10GBT_STAT_LP5G);
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
- phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
+ phydev->lp_advertising,
+ lpadv & MDIO_AN_10GBT_STAT_LP2_5G);
}
ret = genphy_read_status(phydev);
@@ -715,7 +711,7 @@ static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
val = phy_read(phydev, 0x13);
phy_write(phydev, RTL821x_PAGE_SELECT, 0);
- return val >= 0 && val & RTL_SUPPORTS_2500FULL;
+ return val >= 0 && val & MDIO_PMA_SPEED_2_5G;
}
static int rtlgen_match_phy_device(struct phy_device *phydev)
Drop the ad-hoc MDIO constants used in the driver and use generic constants instead. Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/net/phy/realtek.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-)