@@ -636,6 +636,18 @@ static int rtlgen_write_mmd(struct phy_device *phydev, int dev, u16 reg,
return rtl821x_write_page(phydev, 0) ?: ret;
}
+static int rtl822x_probe(struct phy_device *phydev)
+{
+ /* if the PHY was probed via c22, set is_c45 and fill in c45 IDs */
+ if (!phydev->is_c45) {
+ phydev->is_c45 = true;
+
+ return phy_get_c45_ids(phydev);
+ }
+
+ return 0;
+}
+
static int rtl822x_get_features(struct phy_device *phydev)
{
int val;
@@ -961,6 +973,7 @@ static struct phy_driver realtek_drvs[] = {
}, {
.name = "RTL8226 2.5Gbps PHY",
.match_phy_device = rtl8226_match_phy_device,
+ .probe = rtl822x_probe,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -973,6 +986,7 @@ static struct phy_driver realtek_drvs[] = {
}, {
PHY_ID_MATCH_EXACT(0x001cc840),
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
+ .probe = rtl822x_probe,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -985,6 +999,7 @@ static struct phy_driver realtek_drvs[] = {
}, {
PHY_ID_MATCH_EXACT(0x001cc838),
.name = "RTL8226-CG 2.5Gbps PHY",
+ .probe = rtl822x_probe,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -997,6 +1012,7 @@ static struct phy_driver realtek_drvs[] = {
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+ .probe = rtl822x_probe,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1009,6 +1025,7 @@ static struct phy_driver realtek_drvs[] = {
}, {
PHY_ID_MATCH_EXACT(0x001cc849),
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .probe = rtl822x_probe,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
@@ -1021,6 +1038,7 @@ static struct phy_driver realtek_drvs[] = {
}, {
PHY_ID_MATCH_EXACT(0x001cc84a),
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .probe = rtl822x_probe,
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.read_status = rtl822x_read_status,
If the rtl822x was probed via clause 22 addressing, we need to set phydev->is_c45 and fill in phydev->c45_ids so that genphy_c45_* functions will work properly. Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/net/phy/realtek.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)