@@ -2102,10 +2102,39 @@ static int qca808x_cable_test_start(struct phy_device *phydev)
return 0;
}
+static void qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
+ u16 status)
+{
+ u16 pair_code;
+ int length;
+
+ switch (pair) {
+ case ETHTOOL_A_CABLE_PAIR_A:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_B:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_C:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_D:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
+ break;
+ }
+
+ ethnl_cable_test_result(phydev, pair,
+ qca808x_cable_test_result_trans(pair_code));
+
+ if (qca808x_cdt_fault_length_valid(pair_code)) {
+ length = qca808x_cdt_fault_length(phydev, pair);
+ ethnl_cable_test_fault_length(phydev, pair, length);
+ }
+}
+
static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
{
int ret, val;
- int pair_a, pair_b, pair_c, pair_d;
*finished = false;
@@ -2124,36 +2153,10 @@ static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish
if (val < 0)
return val;
- pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
- pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
- pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
- pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
-
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
- qca808x_cable_test_result_trans(pair_a));
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
- qca808x_cable_test_result_trans(pair_b));
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
- qca808x_cable_test_result_trans(pair_c));
- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
- qca808x_cable_test_result_trans(pair_d));
-
- if (qca808x_cdt_fault_length_valid(pair_a)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
- }
- if (qca808x_cdt_fault_length_valid(pair_b)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
- }
- if (qca808x_cdt_fault_length_valid(pair_c)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
- }
- if (qca808x_cdt_fault_length_valid(pair_d)) {
- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D);
- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
- }
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
+ qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
*finished = true;
Refactor qca808x cable test get status function to remove code duplication and clean things up. The same logic is applied to each pair hence it can be generalized and moved to a common function. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- drivers/net/phy/at803x.c | 65 +++++++++++++++++++++------------------- 1 file changed, 34 insertions(+), 31 deletions(-)