diff mbox series

[net-next,v9,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode

Message ID 20240105142719.11042-3-ansuelsmth@gmail.com (mailing list archive)
State Deferred
Delegated to: Netdev Maintainers
Headers show
Series net: phy: generic polarity + LED support for qca808x | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 8 this patch: 8
netdev/cc_maintainers success CCed 0 of 0 maintainers
netdev/build_clang success Errors and warnings before: 8 this patch: 8
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 8 this patch: 8
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 12 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Christian Marangi Jan. 5, 2024, 2:27 p.m. UTC 
Document LED inactive high impedance mode to set the LED to require high
impedance configuration to be turned OFF.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v5:
- Add this patch

 Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Andrew Lunn Jan. 9, 2024, 12:39 a.m. UTC | #1 
On Fri, Jan 05, 2024 at 03:27:14PM +0100, Christian Marangi wrote:
> Document LED inactive high impedance mode to set the LED to require high
> impedance configuration to be turned OFF.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Lee Jones Jan. 11, 2024, 11:02 a.m. UTC | #2 
On Tue, 09 Jan 2024, Andrew Lunn wrote:

> On Fri, Jan 05, 2024 at 03:27:14PM +0100, Christian Marangi wrote:
> > Document LED inactive high impedance mode to set the LED to require high
> > impedance configuration to be turned OFF.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

If the DT Maintainers are happy, so am I.

Acked-by: Lee Jones <lee@kernel.org>
Rob Herring (Arm) Jan. 13, 2024, 1:29 a.m. UTC | #3 
On Fri, 05 Jan 2024 15:27:14 +0100, Christian Marangi wrote:
> Document LED inactive high impedance mode to set the LED to require high
> impedance configuration to be turned OFF.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> Changes v5:
> - Add this patch
> 
>  Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f5b40df6b421..9e7b4aabe0bb 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -206,6 +206,12 @@  properties:
       Makes LED active low. To turn the LED ON, line needs to be
       set to low voltage instead of high.
 
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description: