From patchwork Wed Jan 17 10:28:35 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= X-Patchwork-Id: 13521590 X-Patchwork-Delegate: kuba@kernel.org Received: from relay2-d.mail.gandi.net (relay2-d.mail.gandi.net [217.70.183.194]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 026E91DFF5; Wed, 17 Jan 2024 10:29:14 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.194 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1705487357; cv=none; b=caoycUYQEYeIbRTtmdATyP5oG+dV1+QTYNqbhgg6XOPWQpTtzUIG20INXfGM30JUgQoSUpDoDDsZlmntRkEEcyyu0HDqQhdBa5Dmf2sVctmDTY/ll94f3nZMX3lcl39iPKU0F6532XRxpwV2dkpHYK6CaSC5+E7dpAj3dlcQAM4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1705487357; c=relaxed/simple; bh=BU1PejNBS0a/bBfPMIJAZPtfyJyv/gguozdDnW7Xk3k=; h=Received:DKIM-Signature:From:To:Cc:Subject:Date:Message-Id: X-Mailer:In-Reply-To:References:MIME-Version:Content-Type: Content-Transfer-Encoding:X-GND-Sasl; b=Bcw1OUdEt56gxje/8AI35JTeWFuhirha2v15fFbRXu0eErrqMnsef/eBNx8a5VK5X6vh422qeWF1FZ82COm0hWsErfYPQ/3T1cOmbcbVq1jTsvCrtIYslkT2121awZnEyq7zoaHlUr9l2K5df5UY7REYyATp2FjKk62OU84bs/A= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=arinc9.com; spf=pass smtp.mailfrom=arinc9.com; dkim=pass (2048-bit key) header.d=arinc9.com header.i=@arinc9.com header.b=OCWP0WZ7; arc=none smtp.client-ip=217.70.183.194 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=arinc9.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=arinc9.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=arinc9.com header.i=@arinc9.com header.b="OCWP0WZ7" Received: by mail.gandi.net (Postfix) with ESMTPSA id 03B0A40013; Wed, 17 Jan 2024 10:29:08 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=arinc9.com; s=gm1; t=1705487353; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=bvE0m3OmI9QbGOc2rDZ1+csIvCDwHy1JZu00G19tkXU=; b=OCWP0WZ7kx21iuhGECAdyRwrqNJ/szCQJb0wjEdv8w0aY4uMYhgZh1WlntJyqPbM6WPH4Y L2GUzowt7AaaBGs3fUqXQSfvO5XY1rIN3d4Lj5sQ0V2qwB8Y9E356wexljBGNY3NHNkr3S HFkWEobujBRI6c/6Oe6nHbhT85L/oAqr+9Oaa0pRESFGEGxDgiBm86UDrykjvpto/vpdcc QJZI1nKRMtxIzoAOtE5XaQzxtl1PYSgnVb9mWB5KuGqFRSg8wF1bm3pmAVKb7MwBCLXI5z UJ9iLi7szpLKQTOpXFd9sUgyDq6lk49xDrNYAIV72jxjI5YtjHGnxIneT47Afw== From: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= To: Daniel Golle , Landen Chao , DENG Qingfang , Sean Wang , Andrew Lunn , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Matthias Brugger , AngeloGioacchino Del Regno , Russell King Cc: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= , mithat.guner@xeront.com, erkin.bozoglu@xeront.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org Subject: [RFC PATCH net-next 5/8] net: dsa: mt7530: get rid of priv->info->cpu_port_config() Date: Wed, 17 Jan 2024 13:28:35 +0300 Message-Id: <20240117102838.57445-6-arinc.unal@arinc9.com> X-Mailer: git-send-email 2.40.1 In-Reply-To: <20240117102838.57445-1-arinc.unal@arinc9.com> References: <20240117102838.57445-1-arinc.unal@arinc9.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: arinc.unal@arinc9.com X-Patchwork-Delegate: kuba@kernel.org X-Patchwork-State: RFC priv->info->cpu_port_config() is used for MT7531 and the switch on the MT7988 SoC. It sets up the ports described as a CPU port earlier than the phylink code path would do. This function is useless as: - Configuring the MACs can be done from the phylink_mac_config code path instead. - All the link configuration it does on the CPU ports are later undone with the port_enable, phylink_mac_config, and then phylink_mac_link_up code path [1]. priv->p5_interface and priv->p6_interface were being used to prevent configuring the MACs from the phylink_mac_config code path. Remove them now that they hold no purpose. Remove priv->info->cpu_port_config(). On mt753x_phylink_mac_config, switch to if statements to simplify the code. Remove the definition of PMCR_CPU_PORT_SETTING() now that it holds no purpose. Change mt753x_cpu_port_enable() to void now that there're no error cases left. Link: https://lore.kernel.org/netdev/ZHy2jQLesdYFMQtO@shell.armlinux.org.uk/ [1] Suggested-by: Russell King (Oracle) Signed-off-by: Arınç ÜNAL --- drivers/net/dsa/mt7530.c | 102 ++------------------------------------- drivers/net/dsa/mt7530.h | 11 ----- 2 files changed, 4 insertions(+), 109 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 32db5e14a606..76b304f8fb87 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -965,18 +965,10 @@ mt753x_trap_frames(struct mt7530_priv *priv) MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY)); } -static int +static void mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - int ret; - - /* Setup max capability of CPU port at first */ - if (priv->info->cpu_port_config) { - ret = priv->info->cpu_port_config(ds, port); - if (ret) - return ret; - } /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), @@ -1002,8 +994,6 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port) /* Set to fallback mode for independent VLAN learning */ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE); - - return 0; } static int @@ -2244,8 +2234,6 @@ mt7530_setup(struct dsa_switch *ds) val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); - priv->p6_interface = PHY_INTERFACE_MODE_NA; - mt753x_trap_frames(priv); /* Enable and reset MIB counters */ @@ -2260,9 +2248,7 @@ mt7530_setup(struct dsa_switch *ds) mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2366,9 +2352,7 @@ mt7531_setup_common(struct dsa_switch *ds) mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); if (dsa_is_cpu_port(ds, i)) { - ret = mt753x_cpu_port_enable(ds, i); - if (ret) - return ret; + mt753x_cpu_port_enable(ds, i); } else { mt7530_port_disable(ds, i); @@ -2457,10 +2441,6 @@ mt7531_setup(struct dsa_switch *ds) mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); - /* Let phylink decide the interface later. */ - priv->p5_interface = PHY_INTERFACE_MODE_NA; - priv->p6_interface = PHY_INTERFACE_MODE_NA; - /* Enable PHY core PLL, since phy_device has not yet been created * provided for phy_[read,write]_mmd_indirect is called, we provide * our own mt7531_ind_mmd_phy_[read,write] to complete this @@ -2672,26 +2652,9 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, struct mt7530_priv *priv = ds->priv; u32 mcr_cur, mcr_new; - switch (port) { - case 5: - if (priv->p5_interface == state->interface) - break; - + if (port == 5 || port == 6) mt753x_mac_config(ds, port, mode, state); - if (priv->p5_intf_sel != P5_DISABLED) - priv->p5_interface = state->interface; - break; - case 6: - if (priv->p6_interface == state->interface) - break; - - mt753x_mac_config(ds, port, mode, state); - - priv->p6_interface = state->interface; - break; - } - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); mcr_new = mcr_cur; mcr_new &= ~PMCR_LINK_SETTINGS_MASK; @@ -2767,61 +2730,6 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, mt7530_set(priv, MT7530_PMCR_P(port), mcr); } -static int -mt7531_cpu_port_config(struct dsa_switch *ds, int port) -{ - struct mt7530_priv *priv = ds->priv; - phy_interface_t interface; - int speed; - - switch (port) { - case 5: - if (!priv->p5_sgmii) - interface = PHY_INTERFACE_MODE_RGMII; - else - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p5_interface = interface; - break; - case 6: - interface = PHY_INTERFACE_MODE_2500BASEX; - - priv->p6_interface = interface; - break; - default: - return -EINVAL; - } - - if (interface == PHY_INTERFACE_MODE_2500BASEX) - speed = SPEED_2500; - else - speed = SPEED_1000; - - mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); - - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, - speed, DUPLEX_FULL, true, true); - - return 0; -} - -static int -mt7988_cpu_port_config(struct dsa_switch *ds, int port) -{ - struct mt7530_priv *priv = ds->priv; - - mt7530_write(priv, MT7530_PMCR_P(port), - PMCR_CPU_PORT_SETTING(priv->id)); - - mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, - PHY_INTERFACE_MODE_INTERNAL, NULL, - SPEED_10000, DUPLEX_FULL, true, true); - - return 0; -} - static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { @@ -3080,7 +2988,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .cpu_port_config = mt7531_cpu_port_config, .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, }, @@ -3092,7 +2999,6 @@ const struct mt753x_info mt753x_table[] = { .phy_write_c22 = mt7531_ind_c22_phy_write, .phy_read_c45 = mt7531_ind_c45_phy_read, .phy_write_c45 = mt7531_ind_c45_phy_write, - .cpu_port_config = mt7988_cpu_port_config, .mac_port_get_caps = mt7988_mac_port_get_caps, }, }; diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 4b47a5cac848..caae48703547 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -311,13 +311,6 @@ enum mt7530_vlan_port_acc_frm { PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ PMCR_FORCE_FDX | PMCR_FORCE_LNK | \ PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100) -#define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ - PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ - PMCR_TX_EN | PMCR_RX_EN | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ - PMCR_FORCE_SPEED_1000 | \ - PMCR_FORCE_FDX | PMCR_FORCE_LNK) #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100) #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24) @@ -724,7 +717,6 @@ struct mt753x_info { int regnum); int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad, int regnum, u16 val); - int (*cpu_port_config)(struct dsa_switch *ds, int port); void (*mac_port_get_caps)(struct dsa_switch *ds, int port, struct phylink_config *config); void (*mac_port_validate)(struct dsa_switch *ds, int port, @@ -750,7 +742,6 @@ struct mt753x_info { * @ports: Holding the state among ports * @reg_mutex: The lock for protecting among process accessing * registers - * @p6_interface Holding the current port 6 interface * @p5_intf_sel: Holding the current port 5 interface select * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch * has got SGMII @@ -772,8 +763,6 @@ struct mt7530_priv { const struct mt753x_info *info; unsigned int id; bool mcm; - phy_interface_t p6_interface; - phy_interface_t p5_interface; enum p5_interface_select p5_intf_sel; bool p5_sgmii; u8 mirror_rx;