diff mbox series

[RFC,net-next,v2] tcp: add support for read with offset when using MSG_PEEK

Message ID 20240120165218.2283302-1-jmaloy@redhat.com (mailing list archive)
State RFC
Delegated to: Netdev Maintainers
Headers show
Series [RFC,net-next,v2] tcp: add support for read with offset when using MSG_PEEK | expand

Checks

Context Check Description
netdev/series_format success Single patches do not need cover letters
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1079 this patch: 1079
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 0 of 0 maintainers
netdev/build_clang success Errors and warnings before: 1096 this patch: 1096
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1097 this patch: 1097
netdev/checkpatch warning WARNING: line length of 84 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Jon Maloy Jan. 20, 2024, 4:52 p.m. UTC 
From: Jon Maloy <jmaloy@redhat.com>

When reading received messages from a socket with MSG_PEEK, we may want
to read the contents with an offset, like we can do with pread/preadv()
when reading files. Currently, it is not possible to do that.

In this commit, we allow the user to set iovec.iov_base in the first
vector entry to NULL. This tells the socket to skip the first entry,
hence letting the iov_len field of that entry indicate the offset value.
This way, there is no need to add any new arguments or flags.

In the iperf3 log examples shown below, we can observe a throughput
improvement of ~15 % in the direction host->namespace when using the
protocol splicer 'pasta' (https://passt.top).
This is a consistent result.

pasta(1) and passt(1) implement user-mode networking for network
namespaces (containers) and virtual machines by means of a translation
layer between Layer-2 network interface and native Layer-4 sockets
(TCP, UDP, ICMP/ICMPv6 echo).

Received, pending TCP data to the container/guest is kept in kernel
buffers until acknowledged, so the tool routinely needs to fetch new
data from socket, skipping data that was already sent.

At the moment this is implemented using a dummy buffer passed to
recvmsg(). With this change, we don't need a dummy buffer and the
related buffer copy (copy_to_user()) anymore.

passt and pasta are supported in KubeVirt and libvirt/qemu.

jmaloy@freyr:~/passt$ perf record -g ./pasta --config-net -f
MSG_PEEK with offset not supported by kernel.

jmaloy@freyr:~/passt# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.122.1, port 44822
[  5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 44832
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.02 GBytes  8.78 Gbits/sec
[  5]   1.00-2.00   sec  1.06 GBytes  9.08 Gbits/sec
[  5]   2.00-3.00   sec  1.07 GBytes  9.15 Gbits/sec
[  5]   3.00-4.00   sec  1.10 GBytes  9.46 Gbits/sec
[  5]   4.00-5.00   sec  1.03 GBytes  8.85 Gbits/sec
[  5]   5.00-6.00   sec  1.10 GBytes  9.44 Gbits/sec
[  5]   6.00-7.00   sec  1.11 GBytes  9.56 Gbits/sec
[  5]   7.00-8.00   sec  1.07 GBytes  9.20 Gbits/sec
[  5]   8.00-9.00   sec   667 MBytes  5.59 Gbits/sec
[  5]   9.00-10.00  sec  1.03 GBytes  8.83 Gbits/sec
[  5]  10.00-10.04  sec  30.1 MBytes  6.36 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec  10.3 GBytes  8.78 Gbits/sec   receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
jmaloy@freyr:~/passt#
logout
[ perf record: Woken up 23 times to write data ]
[ perf record: Captured and wrote 5.696 MB perf.data (35580 samples) ]
jmaloy@freyr:~/passt$

jmaloy@freyr:~/passt$ perf record -g ./pasta --config-net -f
MSG_PEEK with offset supported by kernel.

jmaloy@freyr:~/passt# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.122.1, port 40854
[  5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 40862
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.22 GBytes  10.5 Gbits/sec
[  5]   1.00-2.00   sec  1.19 GBytes  10.2 Gbits/sec
[  5]   2.00-3.00   sec  1.22 GBytes  10.5 Gbits/sec
[  5]   3.00-4.00   sec  1.11 GBytes  9.56 Gbits/sec
[  5]   4.00-5.00   sec  1.20 GBytes  10.3 Gbits/sec
[  5]   5.00-6.00   sec  1.14 GBytes  9.80 Gbits/sec
[  5]   6.00-7.00   sec  1.17 GBytes  10.0 Gbits/sec
[  5]   7.00-8.00   sec  1.12 GBytes  9.61 Gbits/sec
[  5]   8.00-9.00   sec  1.13 GBytes  9.74 Gbits/sec
[  5]   9.00-10.00  sec  1.26 GBytes  10.8 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec  11.8 GBytes  10.1 Gbits/sec   receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
logout
[ perf record: Woken up 20 times to write data ]
[ perf record: Captured and wrote 5.040 MB perf.data (33411 samples) ]
jmaloy@freyr:~/passt$

The perf record confirms this result. Below, we can observe that the
CPU spends significantly less time in the function ____sys_recvmsg()
when we have offset support.

Without offset support:
----------------------
jmaloy@freyr:~/passt$ perf report -q --symbol-filter=do_syscall_64 -p ____sys_recvmsg -x --stdio -i  perf.data | head -1
    46.32%     0.00%  passt.avx2  [kernel.vmlinux]  [k] do_syscall_64  ____sys_recvmsg

With offset support:
----------------------
jmaloy@freyr:~/passt$ perf report -q --symbol-filter=do_syscall_64 -p ____sys_recvmsg -x --stdio -i  perf.data | head -1
   27.24%     0.00%  passt.avx2  [kernel.vmlinux]  [k] do_syscall_64  ____sys_recvmsg

Signed-off-by: Jon Maloy <jmaloy@redhat.com>

---
v2: Put test of msg->msg_iter.nr_segs before test on msg->msg_iter.__iov,
    since the latter may be uninitialized when other receive functions
    are used. Reported by Martin Zaharinov.
---
 net/ipv4/tcp.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index fce5668a6a3d..e8fdf3617377 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2351,6 +2351,16 @@  static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
 	if (flags & MSG_PEEK) {
 		peek_seq = tp->copied_seq;
 		seq = &peek_seq;
+		if (msg->msg_iter.nr_segs > 1 && !msg->msg_iter.__iov[0].iov_base) {
+			size_t peek_offset;
+
+			peek_offset = msg->msg_iter.__iov[0].iov_len;
+			msg->msg_iter.__iov = &msg->msg_iter.__iov[1];
+			msg->msg_iter.nr_segs -= 1;
+			msg->msg_iter.count -= peek_offset;
+			len -= peek_offset;
+			*seq += peek_offset;
+		}
 	}
 
 	target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);