@@ -209,6 +209,7 @@ enum ravb_reg {
RFCR = 0x0760,
MAFCR = 0x0778,
CSR0 = 0x0800, /* RZ/G2L only */
+ CSR1 = 0x0804, /* RZ/G2L only */
CSR2 = 0x0808, /* RZ/G2L only */
};
@@ -982,6 +983,21 @@ enum CSR0_BIT {
CSR0_RPE = 0x00000020,
};
+enum CSR1_BIT {
+ CSR1_TIP4 = 0x00000001,
+ CSR1_TTCP4 = 0x00000010,
+ CSR1_TUDP4 = 0x00000020,
+ CSR1_TICMP4 = 0x00000040,
+ CSR1_TTCP6 = 0x00100000,
+ CSR1_TUDP6 = 0x00200000,
+ CSR1_TICMP6 = 0x00400000,
+ CSR1_THOP = 0x01000000,
+ CSR1_TROUT = 0x02000000,
+ CSR1_TAHD = 0x04000000,
+ CSR1_TDHD = 0x08000000,
+ CSR1_ALL = 0x0F700071,
+};
+
enum CSR2_BIT {
CSR2_RIP4 = 0x00000001,
CSR2_RTCP4 = 0x00000010,
@@ -29,6 +29,7 @@
#include <linux/spinlock.h>
#include <linux/reset.h>
#include <linux/math64.h>
+#include <net/ip.h>
#include "ravb.h"
@@ -524,19 +525,29 @@ static int ravb_ring_init(struct net_device *ndev, int q)
static void ravb_csum_offload_init_gbeth(struct net_device *ndev)
{
+ bool tx_enable = ndev->features & NETIF_F_HW_CSUM;
bool rx_enable = ndev->features & NETIF_F_RXCSUM;
u32 csr0;
- if (!rx_enable)
+ if (!(tx_enable || rx_enable))
return;
csr0 = ravb_read(ndev, CSR0);
ravb_write(ndev, csr0 & ~(CSR0_RPE | CSR0_TPE), CSR0);
if (ravb_wait(ndev, CSR0, CSR0_RPE | CSR0_TPE, 0)) {
netdev_err(ndev, "Timeout Enabling HW CSUM failed\n");
- ndev->features &= ~NETIF_F_RXCSUM;
+
+ if (tx_enable)
+ ndev->features &= ~NETIF_F_HW_CSUM;
+
+ if (rx_enable)
+ ndev->features &= ~NETIF_F_RXCSUM;
} else {
- ravb_write(ndev, CSR2_ALL, CSR2);
+ if (tx_enable)
+ ravb_write(ndev, CSR1_ALL, CSR1);
+
+ if (rx_enable)
+ ravb_write(ndev, CSR2_ALL, CSR2);
}
ravb_write(ndev, csr0, CSR0);
@@ -1990,6 +2001,39 @@ static void ravb_tx_timeout_work(struct work_struct *work)
rtnl_unlock();
}
+static bool ravb_is_tx_checksum_offload_gbeth_possible(struct sk_buff *skb)
+{
+ struct iphdr *ip = ip_hdr(skb);
+
+ /* TODO: Need to add support for VLAN tag 802.1Q */
+ if (skb_vlan_tag_present(skb))
+ return false;
+
+ /* TODO: Need to add HW checksum for IPV6 */
+ if (skb->protocol != htons(ETH_P_IP))
+ return false;
+
+ switch (ip->protocol) {
+ case IPPROTO_TCP:
+ break;
+ case IPPROTO_UDP:
+ /* If the checksum value in the UDP header field is “H’0000”,
+ * TOE does not calculate checksum for UDP part of this frame
+ * as it is optional function as per standards.
+ */
+ if (udp_hdr(skb)->check == 0)
+ return false;
+ break;
+ /* TODO: Need to add HW checksum for ICMP */
+ case IPPROTO_ICMP:
+ fallthrough;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
/* Packet transmit function for Ethernet AVB */
static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
@@ -2005,6 +2049,11 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev)
u32 entry;
u32 len;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (!ravb_is_tx_checksum_offload_gbeth_possible(skb))
+ skb_checksum_help(skb);
+ }
+
spin_lock_irqsave(&priv->lock, flags);
if (priv->cur_tx[q] - priv->dirty_tx[q] > (priv->num_tx_ring[q] - 1) *
num_tx_desc) {
@@ -2408,6 +2457,13 @@ static int ravb_set_features_gbeth(struct net_device *ndev,
ravb_write(ndev, 0, CSR2);
}
+ if (changed & NETIF_F_HW_CSUM) {
+ if (features & NETIF_F_HW_CSUM)
+ ravb_write(ndev, CSR1_ALL, CSR1);
+ else
+ ravb_write(ndev, 0, CSR1);
+ }
+
ndev->features = features;
err_wait:
ravb_write(ndev, csr0, CSR0);
@@ -2593,8 +2649,8 @@ static const struct ravb_hw_info gbeth_hw_info = {
.emac_init = ravb_emac_init_gbeth,
.gstrings_stats = ravb_gstrings_stats_gbeth,
.gstrings_size = sizeof(ravb_gstrings_stats_gbeth),
- .net_hw_features = NETIF_F_RXCSUM,
- .net_features = NETIF_F_RXCSUM,
+ .net_hw_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM,
+ .net_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM,
.stats_len = ARRAY_SIZE(ravb_gstrings_stats_gbeth),
.max_rx_len = ALIGN(GBETH_RX_BUFF_MAX, RAVB_ALIGN),
.tccr_mask = TCCR_TSRQ0,
TOE has hw support for calculating IP header and TCP/UDP/ICMP checksum for both IPV4 and IPV6. Add Tx checksum offload supported by TOE for IPv4 and TCP/UDP. For Tx, the result of checksum calculation is set to the checksum field of each IPv4 Header/TCP/UDP/ICMP of ethernet frames. For the unsupported frames, those fields are not changed. If a transmission frame is an UDP frame of IPv4 and its checksum value in the UDP header field is H’0000, TOE does not calculate checksum for UDP part of this frame as it is optional function as per standards. We can test this functionality by the below commands ethtool -K eth0 tx on --> to turn on Tx checksum offload ethtool -K eth0 tx off --> to turn off Tx checksum offload Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- drivers/net/ethernet/renesas/ravb.h | 16 ++++++ drivers/net/ethernet/renesas/ravb_main.c | 66 ++++++++++++++++++++++-- 2 files changed, 77 insertions(+), 5 deletions(-)